hama 00177101 USB 3.1 Sata Hard Drive Adapter Instruction Manual

00
177101
USB 3.1 SATA HardDrive Adapter
USB-3.1-SATA-Festplattenadapter
Operating Instructions

Operating instruction

Thank you for choosing the Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• USB 3.1 –SATA Adapter
• Plug-in power supply
• USB 3.1 connecting cable Type-A
• USB-C 3.1 connecting cable
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Do not operate the product outside the power limits given in the specifications.
• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
• Do not use the product in moist environments and avoid splashes.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
• Do not drop the product and do not expose it to any major shocks.
• Keep this product, like all electrical products, out of the reach of children!
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.

Warning

• Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the functionality of the product.
• Do not continue to operate the device if it becomes visibly damaged.

 Connection and getting started

Warning

• The hard drive adapter may only be used with the included plug-in power supply.
• Pay close attention to the power and voltage information on the hard drive adapter if you decide to use another power supply unit.
• The power supply unit’s power data must correspond to the specified parameters
• Make sure that all cables are unplugged from the hard drive adapter before connecting.
• Attach the hard drive adapter to the hard drive
• Place the harddrive on a level, stable and non-metal surface
• Connect the power supply unit to the hard drive adapter
• Then connect the power supply unit to an unused socket
• Connect the included USB 3.1 cable to the hard drive adapter and an unused USB port on your PC/ notebook.

Warning

• The hard drive may not be moved after connecting the power supply unit to the socket. This could result in damage to the hard drive and data loss.
• The hard drive adapter may not be unplugged from the PC during data transfer under any circumstance. Data may be lost.
• Under no circumstance does Hama GmbH &Co KG accept liability for loss of data stored on data storage media.
• The operating system of your PC /notebook will initialize the hard drive after connecting. This process may take aminute.
• If the harddrive is already partitioned and data is on the harddrive, you can then access that data.
• New or unpartitioned harddrives must be partitioned and formated after initialisation. Refer to the operating system manual for your computer/notebook for the necessary steps to do so.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical Data

Adapter

USB Version

| USB 3.1

(Generation 1- backwards compatible with USB 2.0 / 1.1)

Harddrive Version| SATA (Serial ATA), 2.5″ and 3.5″

Speci fi cations in accordance with **Regulation (EU)

2019/1782**

Manufacturer’s name or trademark, commercial registration number, and address| Hama, HRA12159,

Dresdner Str. 9,

86653 Monheim

Model identifier| FJ-SW126G1202000E
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / Output current / Output power| 12.0 V DC/ 2.0 A/

24.0 W

Average active efficiency| 87.3 %
Efficiency at low load (10 %)| 81.9 %
No-load power consumption| 0.08 W

 Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as
batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

http://de.hama.com/177101-man?qr=sma

Dieses DokumentinweiterenSprachen finden Sieunter
www.hama.com/177101oder durchscannen desQR- Codes.
Youwill find this documentinotherlanguages at
www.hama.com/177101orbyscanningthe QR code.

Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00177101/0 4.20

Documents / Resources

| hama 00177101 USB 3.1 Sata Hard Drive Adapter [pdf] Instruction Manual
00177101, USB 3.1 Sata Hard Drive Adapter
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>