PHILIPS DDNG232 RS-232 Network Gateway Installation Guide
- June 6, 2024
- Philips
Table of Contents
DDNG232
RS-232 Network Gateway
Installation Instructions
Devices must be installed in an approved enclosure by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
|
---|---
|
|
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
© 2021 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
AZZ 408 1021 R16
www.lighting.philips.com/dynalite
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>