Walker Edison DOMB4C Greyer Modern 1 Drawer Simple Nightstand Instruction Manual
- June 17, 2024
- Walker Edison
Table of Contents
Walker Edison DOMB4C Greyer Modern 1 Drawer Simple Nightstand
Product Information
- Specifications:
- Model: DOMB4C
- Weight Capacity: Top Panel – 40 lbs, Drawer Front – 12 lbs, Other Panels – 30 lbs
Product Usage Instructions
- General Assembly Guidelines:
- Ensure all parts and hardware are available before starting assembly.
- Follow each step carefully for proper assembly.
- Two people are recommended for ease of assembly.
- Main hardware used: wood dowels and screws. Phillips head screwdriver required (not included).
- Parts List:
- Part /Description /Qty
- 01 /Top Panel /1
- Hardware List:
- Wooden Dowel: 16 pcs
- FAQs
- Q: What tools are required for assembly?
- A: A Phillips head screwdriver and a hammer are required for assembly. Ensure you have these tools before starting.
- Q: Can this product be assembled by one person?
- A: While two people are recommended for ease of assembly, it is possible to assemble the product alone with careful attention to instructions.
General Assembly Guidelines
- Ensure that all parts and hardware are available before beginning assembly.
- Follow each step carefully to ensure the proper assembly of this product.
- Two people are recommended for ease in the assembly of this product.
- The two main types of hardware used to assemble this product are: wood dowels and screws.
- A Phillips head screwdriver is required for the assembly of this product (not included)
Parts List
Part # | Description | Qty |
---|---|---|
01 | Top Panel | 1 |
02 | Right Side Panel | 1 |
03 | Left Side Panel | 1 |
04 | Bottom Panel | 1 |
05 | Drawer Front | 1 |
06 | Right Drawer Side | 1 |
07 | Left Drawer Side | 1 |
08 | Drawer Back | 1 |
09 | Smaller Back Panel | 1 |
10 | Larger Back Panel | 1 |
11 | Drawer Bottom | 1 |
Hardware List
The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.
INSTALLATION STEPS
- Step 1
- Insert wooden dowel (A) to parts (2,3,4) and insert cam bolt (B) to parts (1,2,3).
- Step 2
- Attach slides (L1, R1) to parts (2,3) with screw (D) and attach plastic foot (J) to parts (2,3) with screw (D).
- Step 3
- Secure part (4) to part (3) using cam lock (C) as per diagram.
- Step 4
- Secure parts (3,4) to part (2) using cam lock (C) as per diagram.
- Step 5
- Slide back panels (9,10) and part (G) into side panel (2,3).
- Step 6
- Secure parts (1) to parts (2,3) using cam lock (C).
- Step 7
- Secure back panels (9,10) using screw (E) 6 and support (H).
- Step 8
- Insert wooden dowel (A) to parts (6,7,8) and insert cam bolt (B) to part (5).
- Step 9
- Secure parts (6,7) to part (8) using screw (F).
- Secure part (5) to parts (6,7) using cam lock (G).
- Step 10
- Attach slides (L2, R2) to parts (6,7) with screw (D).
- Place sticker (I) over the holes as per the diagram.
- Step 11
- Step 12
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. Please visit our website for the most current instructions, and assembly tips, to report damage or request parts. www.walkeredison.com. Revised 07/2022 – V1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>