Walker Edison AI-MUTD7D 2-Piece Modern Upholstered Backless Counter Stool Installation Guide
- June 17, 2024
- Walker Edison
Table of Contents
Walker Edison AI-MUTD7D 2-Piece Modern Upholstered Backless Counter Stool
Product Specifications
- Model: MUTD7D
- Revised Date: 14/07/2023
- Main Hardware: Bolts and screws
Product Usage Instructions
General Assembly Guidelines
- Ensure all parts and hardware are available before starting assembly.
- Follow each step carefully for proper assembly.
- It is recommended to have two people for easier assembly.
- A drill may be needed to secure the product to the wall.
Step-by-Step Assembly
Step 1
Using bolt (A), attach part (3) to part (2) with hex key (C) as shown in the
diagram. Do not fully tighten all bolts at this stage.
Step 2
Attach part (4) to parts (2,3) using bolt (B) and hex key (C) following the
diagram.
Step 3
Continue assembly following the provided instructions for each part.
Final Assembly
Complete the assembly process by securing all parts together as instructed.
FAQ
-
Q: Can power tools be used for assembly?
A: Power tools should not be used to assemble this product as per the guidelines. -
Q: Are additional hardware pieces included?
A: The listed hardware quantities are required for assembly, but some extra hardware may also be included.
For Residential Use Only
Please visit our website for the most current instructions, and assembly tips, report damage, or request parts. www.walkeredison.com
General Assembly Guidelines
- Ensure that all parts and hardware are available before beginning assembly.
- Follow each step carefully to ensure the proper assembly of this product.
- Two people are recommended for ease in the assembly of this product.
- The main type of hardware used to assemble this product are bolts and screws.
- Power tools should not be used to assemble this product.
- The drill may be needed to secure the product to the wall.
Parts List
Hardware List
The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.
INSTALLATION STEPS
- Using bolt (A) attach part (3) to part (2) with hex key (C) as per diagram. Note: please do not fully tighten all bolts.
- Using bolt (B) attach part (4) to parts (2,3) with hex key (C) as per diagram.
- Using bolt (B) attach parts (2,3) to parts (1) with hex key (C) as per diagram. Note: Fully tighten all bolts from step 1.
- Final Assembly
Copyright © 2023 by Walker Edison Furniture Co., LLC. All rights reserved.
Item # : MUTD7D