WALKER EDISON AI-ALSD1E Modern Curved Back Upholstered Dining Chair Instruction Manual
- June 17, 2024
- Walker Edison
Table of Contents
WALKER EDISON AI-ALSD1E Modern Curved Back Upholstered Dining Chair
Product Specifications
- Model: ALSD1E
- Dimensions: Not specified
- Recommended Assembly: Two people
- Main Hardware: Bolts and screws
Product Usage Instructions
General Assembly Guidelines
- Ensure all parts and hardware are available before starting assembly.
- Follow each step carefully for proper assembly.
- It is recommended to have two people for easier assembly.
- Use bolts and screws as the main hardware for assembly.
- Avoid using power tools for assembly.
- A drill may be needed to secure the product to the wall.
Step-by-Step Assembly Instructions
-
Step 1
Using bolt (A), lock washer (D), and flat washer (E), secure part (4) to part (3) with hex key (F) as shown in the diagram. Do not fully tighten all bolts at this stage. -
Step 2
Using bolt (C), attach part (3,4) to part (1) with hex key (F) according to the diagram. -
Step 3
Using bolt (B), lock washer (D), and flat washer (E), attach part (3,4) to part (2) with hex key (F) as per the diagram. Ensure all bolts from step 1 are fully tightened. -
Step 4
Complete the final assembly following the provided guidelines.
FAQ (Frequently Asked Questions)
-
Q: Can power tools be used for assembly?
A: Power tools should not be used for assembling this product to avoid damage or over-tightening of hardware. -
Q: How many people are recommended for assembly?
A: It is recommended to have two people for easier and efficient assembly of the product. -
Q: What type of hardware is mainly used for assembly?
A: Bolts and screws are the main types of hardware used for assembling this product.
For Residential Use Only
Please visit our website for the most current instructions, assembly tips,
report damage,or request parts.
www.walkeredison.com
General Assembly Guidelines
- Ensure that all parts and hardware are available before beginning assembly.
- Follow each step carefully to ensure the proper assembly of this product.
- Two people are recommended for ease in the assembly of this product.
- The main type of hardware used to assemble this product are: bolts and screws.
- Power tools should not be used to assemble this product.
- Drill may be needed for securing product to wall.
Parts List
Hardware List
The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.
- Using bolt (A), lock washer(D) and flat washer(E) secure part (4) to part (3) with hex key (F) as per diagram. Note: please do not fully tighten all bolts.
- Using bolt (C) attach part (3,4) to part (1) with hex key (F) as per diagram.
- Using bolt (B), lock washer(D) and flat washer (E) attach part (3,4) to part (2) with hex key (F) as per diagram. Note:fully tighten all bolts from step 1.
- Final Assembly
Copyright © 2023 by Walker Edison Furniture Co., LLC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>