Yoto Mini Player Audio Companion for Kids Instructions
- June 6, 2024
- yoto
Table of Contents
Safety Information
INSTRUCTION FOR SAFE USE
Do not operate if damaged, and/or if broken.
To avoid malfunction or damage to your Yoto Mini Player, please observe the
following:
Do not expose it to water or moisture whilst in operation. If you do need to
clean with liquids be sure to disconnect the USB-C cable and power off the
Yoto Mini Player before cleaning.
Do not expose it to heat from any source; the Yoto Mini Player is designed for
reliable operation at normal ambient room temperatures.
Take care whilst handling to avoid mechanical damage to the unit.
Do not tamper with screws or dismantle the product in any way. The physical
elements of the product are not serviceable in the field.
REGULATORY COMPLIANCE INFORMATION
The Yoto Mini Player complies with the relevant provisions of the RoHS
Directive for the European Union.
CE / UKCA Statement: This product is in conformity with EU Directives and UK
Regulations for Toys, Radio Equipment, RoHS, and Electromagnetic Compatibility
WEEE Directive Statement: In common with all Electronic and Electrical
products the Yoto Mini Player should not be disposed of in household waste in
the EU or the UK.
Alternative arrangements may apply in other jurisdictionsFCC Warning: This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this
standard during product certification for use next to the head with the
minimum separation distance of 5 mm. This transmitter must not be collocated
or operating in conjunction with any other antenna or transmitter.
This product is in compliance with FCC RF Exposure requirements and refers to
the FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
search for FCC ID: 2AS6W-PRPLXX00860
This EUT is in compliance with SAR for general population/uncontrolled
exposure limits in IC RSS-102 and had been tested in accordance with the
measurement methods and procedures specified in IEEE 1528 and IEC 62209. This
equipment should be installed and operated with a minimum distance of 5 mm
between the radiator and your body. This device and its antenna(s)must not be
co-located or operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IMPORTANT: PLEASE RETAIN THIS
INFORMATION FOR FUTURE REFERENCE
WARNINGS
WARNING: Choking hazard. Small Parts.
Not for children under 3 years.
WARNING: Long Cord. Strangulation has not been for children under 3
years.
This product shall only be charged and used with a USB-C cable.
This product should be operated in a well-ventilated environment and should
not be covered.
This product should be placed on a stable, flat surface in use and should not
be contacted by conductive items.
This toy contains batteries that are non-replaceable.
– FCC Representative:
TianHeng Consulting, LLC
392 Andover Street
Wilmington, MA 01887, United States
Phone: +1-617- 997-4010
Manufactured by Yoto Ltd.
Assembled in China, Guangdong
www.yotoplay.com
Yoto Limited
Kemp House, 152-160
City Road, London,
EC1V 2NX, UK| Yoto Limited
c/o Borchwerf 5
4704 RG Roosendaal,
The Netherlands| Yoto Inc.
348 4th Avenue #1011
Brooklyn, NY 11215,
USA
---|---|---
Power: 5V 1A
Freq: 2400-2500Mhz
Max Radio Freq: 112mW/20.5dBm
Model: Yoto Mini
FCC: 2AS6W-PRPLXX00860
IC: 24624-PRPLXX00860
Ref: PAPKEU00004_05
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>