V3 Player Generation Lulabug Kids
Instruction Manual

Safety Information

IMPORTANT : PLEASE RETAIN THIS
INFORMATION FOR FUTURE REFERENCE

**WARNING** : Not suitable for children under 3 years of age. Small Parts. Choking Hazard.
Long Cord. Strangulation hazard.

WARNING: Power Cable. Electrocution Hazard.
Must be charged by adults out of reach of children.
Misuse of charger can cause electric shock.
WARNING: Do not cover. Risk of overheating.
****WARNING: Yoto Player contains inaccessible, high-powered magnets, which can interfere with pacemakers and other implanted medical devices.
Adult set up & supervision required during use by young children. Care must be taken to ensure children do not sleep with the Yoto Player in their beds or cover the product in any way. Transformers or power supplies are not toys. The use of Yoto Player by children must be under the full supervision of adults.
It is recommended the Yoto Player is used with a suitable transformer or power supply for toys which has a minimum 5V—1A power adapter with a USB-A port bearing the following symbols:

INSTRUCTION FOR SAFE USE

Check product and power supply regularly for damage and in the event of damage, it must not be used until the damage has been repaired.
To avoid malfunction, damage to your Yoto Player or risking voiding your product guarantee (found at yotoplay.com) please observe the following:
Do not expose it to water or moisture whilst in operation, do not submerge. Clean with a dry soft cloth, if this does not remove the dirt, the Yoto Player must be disconnected from the power supply before cleaning with a dump microfibre cloth.

Please do not use solvents, chlorides or chemical cleaning agents. Yoto Player is not splash or drip proof.
This product should be operated in a well- ventilated environment and ventilation openings must not be covered. Do not expose it to heat from any source and avoid charging near radiators or placing it in direct sunlight. The Yoto Player is designed for reliable operation at normal ambient room temperatures between 0°C/32°F and 35°C/95°F, otherwise, it may become damaged.
The Yoto Player safe storage temperature range is -40°C/-40°F to 60°C/140°F.
Take care whilst handling to avoid mechanical damage to the unit. It is recommended to purchase a Yoto Adventure Jacket for your Yoto Player to protect it if dropped or bumped (sold separately).
Do not tamper with screws or dismantle the product in any way. The physical elements of the product are not serviceable in the field. This toy contains batteries that are non-replaceable because there is risk of explosion if the battery is replaced by an incorrect battery type.
Protect the power cable from being walked on or pinched. This product should be placed on a stable, flat surface when in use and must not be put in contact with conductive metal items. Unplug during lightning storms or when unused for long periods of time and ensure the mains plug adapter is readily available to disconnect the equipment.

REGULATORY COMPLIANCE INFORMATION

The Yoto Player complies with the relevant provisions of the RoHS Directive for European Union & RoHS Regulation for UK. WEEE Statement for the European Union & UK: In common with all Electronic and Electrical products the Yoto Player must not be disposed of in household waste or burnt, but instead taken to the nearest household waste recycling centre at the end of its usable life. Alternative arrangements may apply in other jurisdictions.
CE & UKCA Statement: Yoto Limited declares that the Yoto Player (3rd Generation) is in compliance with Directive 2014/53/EU and the Radio Equipment Regulations 2017. The full text of the UK and EU declarations of conformity are available at the following internet address: yotoplay.com/pages/conformity

FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference willnct occur in a particular installation. If this equipment does cause harrful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to corredt the interference by one or more df the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

FCC Representative:

TianHeng Consulting, LLC, 392 Andover Street,
Wilmington, MA 01887, United States
Phone: +1-617- 997-4010

IC Warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development  Canada’s licence-exempt RSS(s). Operation of this device is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class [B] digital complies with Canadian ICES- 003.

Power (Alimentation): USB-C (DC)-Max PD/QC:
5V 3A, 9V 2A, 12V 1.5A/18W Max
Apple: 5V 2.4A/12W
BC1.2 CDP/DCP: 5V 1.5A/7.5W
Min: 5V 1A/5W
Wireless (Sons fil) (DC)-Max: 15W
(Recommended/ (Recommandé)), 1OW, 5W
Wifi freq (Fréquence Wifi): 2.4-2.5 GHz
Bluetooth profile (Profil Bluetooth): AVRCP + A2DP
Max. Radio Freq. (Fréquence Radio maximale): N2mW/20.5 dBm
FCC: 2AS6W-PRP3XX01755
IC: 24624-PRP3XX01755
Yoto Limited
124 City Road,
London, ECV 2NX
Yoto SAS
& Rue Saint Augustin
75002 Paris Yoto Inc.
228 Park Ave S

48734

New York
NY 10003
Manufactured by Yoto Ltd.
London, EC1V 2NX, UK
(Fabriqué par Yoto Ltd. Londres,
ECTV 2NX, Royaume-Uni)
Assembled in China, Guangdong
yotoplay.com
hello@yotoplay.com

    Ref: PAPKXXO1759_10

Documents / Resources

| yoto V3 Player Generation Lulabug Kids [pdf] Instruction Manual
V3 Player Generation Lulabug Kids, V3, Player Generation Lulabug Kids, Generation Lulabug Kids, Lulabug Kids, Kids
---|---

References

• Yoto - The Screen-Free Audio Player for Children

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>