yoto PRACXX01420 Bluetooth Headphones User Manual

June 9, 2024
yoto

yoto PRACXX01420 Bluetooth Headphones

yoto-PRACXX01420-Bluetooth-Headphones-product

Controls

yoto-PRACXX01420-Bluetooth-Headphones-fig- \(1\)

Scan the QR Code
Our support pages will tell you everything you need to know about your new headphones.

Scan the QR Code FR
Our support pages will tell you everything you need to know about your new headphones.

Scan the QR Code DE
Our support pages will tell you everything you need to know about your new headphones.

Scan the QR Code IT
Our support pages will tell you everything you need to know about your new headphones.

Scan the QR Code ES
Our support pages will tell you everything you need to know about your new headphones.

Visit our support pages

Safety Information

IMPORTANT:
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.

  • WARNING: Not suitable for children under 3 years of age. Long Cord. Strangulation hazard. Power Cable. Electrocution Hazard.
  • WARNING: To prevent possible hearing damage, don’t listen at high volume levels for long periods, and don’t use headphones while driving or cycling, or in any situation where the inability to hear other sounds could place you in danger.

Adult setup and supervision are required. The product must not be charged within reach of children under 3 years due to electrical shock hazard.

Transformers or power supplies are not toys, the use of these products by children shall be under the full supervision of parents. It is recommended the product is used with a suitable transformer or power supply for toys that have a minimum 5V 1A power adapter with a USB-A port bearing the following symbol.

INSTRUCTION FOR SAFE USE

It is strongly recommended that the Yoto App’s built-in volume limiter settings are used to restrict the maximum volume allowed. Caregiver supervision is necessary to check the loudness and judge whether the volume levels are appropriate level for the environment. Please refrain from using maximum volume. When necessary, in loud environments, please limit the exposure of maximum volume to short periods of less than 2 hours, take regular breaks and ensure the volume is returned to minimal levels once the environmental noise has reduced. The reason for this advice is that the World Health Organisation (WHO) recommends 85db is the maximum safe volume level for up to eight hours, however this level is too quiet for noisy environments. Therefore, Yoto have designed their headphones to not exceed the legal EU limit of 94dBA according to EN 55032-2 whilst being loud enough to ensure they are still useful. To help set volume levels, speak at a normal volume while listening to headphones, then lower the volume until you can hear your own voice.

Check the product and power supply regularly for damage and in the event of damage, it shall not be used until the damage has been repaired. To avoid malfunction, damage to your product or risking voiding your product guarantee (found at yotoplay. com) please observe the following:

Do not expose it to water or moisture whilst in operation. Clean with a dry soft cloth, if this does not remove the dirt and liquids are necessary the product must be disconnected from the transformer or power supply before cleaning. Do not expose it to heat from any source and avoid charging near radiators or placing it in direct sunlight.
Do not tamper with screws or dismantle the product in any way. The physical elements of the product are not serviceable in the field. This toy contains batteries that are non-replaceable because there is risk of explosion if the battery is replaced by an incorrect battery type. Protect the power cable from being walked on or pinched. Unplug during lightning storms or when unused for long periods of time and ensure the mains plug adapter is readily available to disconnect the equipment.

REGULATORY COMPLIANCE INFORMATION

The product complies with the relevant provisions of the RoHS Directive for European Union & RoSH Regulation for UK.

WEEE Directive Statement for the European Union & UK: In common with all Electronic and Electrical products the product should not be disposed of in household waste or burnt, but instead taken to the nearest household waste recycling centre at the end of its usable life. Alternative arrangements may apply in other jurisdictions.

CE & UKCA Statement:
This product is in conformity with the protection requirements of EU Council Directive 2014/53/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility and the UK Electromagnetic Compatibility Regulations 2016.

FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Representative:
TianHeng Consulting, LLC, 392 Andover Street, Wilmington, MA 01887, United States. Phone: +1-617- 997-4010

IC Warning:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class [B] digital complies with Canadian ICES-003.

IC Representative:
Tianheng Consulting Inc. 130 Terence Matthews Cres, Suite C2, Kanata, ON K2M 0J1, Canada, Phone: +1 613-220-8490

Specification

  • Bluetooth Version: V5.0 + EDR compliant
  • Bluetooth Supported Profiles: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap Bluetooth Distance Range: 10m/ 33ft
  • Carrier Frequency Range: 2.402GHz-2.480GHz
  • Battery: Built-in Grade A Rechargeable lithium polymer 3.7VDC/500mAh
  • Charging Voltage: DC5V (500MA)
  • Maximum Power Input: DC 5V_1A
  • Sound Limit: 85dB SPL limited
  • Charging Time: approx. 2.5 hours
  • Battery Life: 25 hours playback, stand-by 200 hours
  • Dynamic Frequency Range: 20Hz- 20kHz
  • S/N Ratio: 85+ 3dB
  • Drivers: 40mm
  • Driver Sensitivity: 100dB
  • Total Harmonic Distortion (THD): < 0.1%
  • Impedance (Ohm): 32Ω ±15%
  • Max Radio Power: 15mW
  • FCC ID: 2AS6W-PRACXX01420
  • IC: 24624-PRACXX01420

Yoto Limited
Kemp House, 124 City Road, London, EC1V 2NX Yoto SAS, 8 rue Saint Augustin, 75002 Paris

Yoto Inc.
228 Park Ave S #48734, New York NY 10003

Manufactured by Yoto Ltd.
London, EC1V 2NX, UK
Assembled in China, Shantou
yotoplay.com
hello@yotoplay.com

Ref: PAPKXX01623_01.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals