yoto PAPKXX01781 Accordion Dock Instruction Manual
- October 30, 2023
- yoto
Table of Contents
PAPKXX01781 Accordion Dock
Instruction Manual
Safety Information
IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
WARNING: Not suitable for children under 3 years of age. Small Parts.
Choking Hazard. Long Cord. Strangulation hazard.
WARNING: Power Cable. Electrocution Hazard The Yoto Player must be
charged by adults out of reach of children. Misuse of charger can cause
electric shock.
WARNING: Yoto Wireless Dock contains inaccessible. high-powered magnets,
which can interfere with pacemakers and other implanted medical devices.
Adult set up & supervision required. Care must be taken to ensure children do
not sleep with the Yoto Wireless Dock in their beds or cover the product in
any way. Transformers or power supplies are not toys, the use of these
products by children must be under the direct supervision of adults.
It is recommended the Yoto Wireless Dock is used with a suitable USB-C
transformer or power supply for toys which has a minimum 5V.-1.5A power rating
bearing the following symbols:
INSTRUCTION FOR SAFE USE
Check the Wireless dock and power supply regularly for damage and In the event
of damage. it must not be used until the damage has been repaired.
To avoid malfunction, damage to your Yoto Wireless Dock or risking voiding
your product guarantee (found at yotoplay.com) please observe the following:
Do not expose It to water or moisture whilst in operation, do not submerge.
Clean with a dry soft cloth. if this does not remove the dirt and liquids are
necessary the Yoto Wireless Dock must be disconnected from the transformer or
power supply before cleaning with a damp microfibre cloth. Please do not use
solvents, chlorides or chemical cleaning agents. Yoto Wireless Dock is not
splash or drip proof.
This product should be operated in a well-ventilated environment. Do not
expose it to heat from any source and avoid charging near radiators or placing
It In direct sunlight. The Yoto Wireless Dock Is designed for reliable
operation at normal ambient room temperatures between 07 32F and 35°/95F,
otherwise, it may become damaged.
The Yoto Wireless Dock safe storage temperature range is -40°/F to 60°/140°F.
Take care whilst handling to avoid mechanical damage to the unit. Do not
tamper with screws or dismantle the product in any way. The physical elements
of the product are not serviceable in the field.
Protect the power cable from being walked on or pinched. This product should
be placed on a stable, flat surface when in use and must not be put in contact
with conductive metal items. Unplug during lightning storms or when unused for
long periods of time and ensure the mains plug adapter is readily available to
disconnect the equipment.
REGULATORY COMPLIANCE INFORMATION
The Yoto Wireless Dock complies with the relevant provisions of the RoHS
Directive for European Union & RoSH Regulation for UK
WEEE Statement for the European Union & UK In common with all Electronic and
Electrical products the Yoto Player must not be disposed of in household waste
or burnt, but Instead taken to the nearest household waste recycling centre at
the end of its usable life. Alternative arrangements may apply in other
jurisdictions.
CE & UKCA Statement: Yoto Limited declares that the Yoto Wireless Dock is in
compliance with Directive 2014/53/EU and the Radio Equipment Regulations 2017.
The full text of the UK and EU declarations of conformity are available at the
following Internet address: yotoplay.com/pages/
conformity FCC Warning: This device complies with Part 15 of the FCC Rules.
Operation Is subject to the following two conditions:
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ N technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be Installed and operated with
minimum distance 20cm between the radiator & body.
FCC Representative:
Tianhe Consulting, LLC. 392 Andover Street. Wilmington, MA 01887. United
States, Phone: +1-617- 997-4010
IC Warning: This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s).Operation of this device is subject
to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, Including interference that may cause undesired operation of the device.
This Class (B) digital complies with Canadian ICES- 003.
IC Representative: Tianhe Consulting Inc. 130 Terence Matthews Cres.
Suite C2. Kanata. ON K2M 0J1, Canada, Phone: *1(613) 220-8490
Radio Frequency Exposure Statement for IC This equipment complies with IC
exposure limits set forth for an uncontrolled environment. This equipment
shall be installed and operated with minimum distance 10cm between the
radiator & body.
THIS IS DIGITAL PROOF ONLY. IT IS ONLY FOR CONTENT AND SIZE APPROVAL.
IMPORTANT: PLEASE CHECK ALL FILES AND JOB SPECIFICATIONS CAREFULLY. ONCE THIS
PROOF IS APPROVED, YOU ARE AGREEING TO SPELLING, LAYOUT, COPY AND SIZE.
COLOURS PRINTED WILL FOLLOW THE DESIGN FILE. WE ARE NOT RESPONSIBLE FOR ERRORS
AFTER THE PROOF HAS BEEN APPROVED. PLEASE CONTACT US WITH ANY QUESTIONS OR
CONCERNS. THANK YOU FOR YOU ORDER. UK OFFICE – EMAIL:
infottlyte.uk I PHONE: 0207 1234 200 I CHINA OFFICE –
EMAIL: mark.hongaapip.com.hk I PHONE: 0086 755
8472 2215
APPROVED and ready for print
APPROVED with INDICATED CHANGES. No new proof required.
NEW PROOF REQUIRED with indicated changes.
APPROVED BY:…….
DATE:………………
BRAND: Yoto
DESCRIPTION: Accordion Dock Safety Information
PRODUCT NUMBER: PAPKXX01781_01
VERSION: 01
MATERIAL: 80gsm paper
FINISHING: Varnish
PRINTING METHOD: 4C Offset Printer
COLOUR: CMYK
PANTONES: Pantone No.: PMS
Pantone No.: PMS
Manufactured by Yoto Ltd. London. EC1V 2NX. UK Assembled in China,
Guangdong yotoplay.com
hello@yotoplay.com
Yoto Limited 124 City Road, London. EC1V 2NX
Yoto SAS, 8. rue Saint Augustin 75002 Paris France
Yoto Inc. 228 Park Ave S 448734 New York NY 10003
APIP Asia-Pacific Integrated Packaging Technology
Manufacturing Solutions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>