yoto H4205 Wireless Ear Headphones Instruction Manual

: June 16, 2024
: yoto

Table of Contents

Safety Information
INSTRUCTION FOR SAFE USE
REGULATORY COMPLIANCE INFORMATION
48734
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

H4205 Wireless Ear Headphones
Instruction Manual

Safety Information

IMPORTANT : PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
WARNING : Not suitable for children under 3 years of age. Small Parts. Choking Hazard.
Long Cord. Strangulation hazard.
WARNING : Power Cable. Electrocution Hazard.
Must be charged by adults out of reach of children.
Misuse of charger can cause electric shock.
****WARNING: To prevent possible hearing damage, don’t listen at high volume levels for long periods, and don’t use headphones while driving or cycling, or in any situation where the inability to hear other sounds could place you in danger Transformers or power supplies are not toys, the use of these products by children must be under the full supervision of adults. It is recommended the Yoto Wireless Headphones are used with a suitable transformer or power supply for toys which has a minimum 5V-—1A power adapter with a USB-A port bearing the following symbols:

INSTRUCTION FOR SAFE USE

It is strongly recommended that the Yoto App’s built-in volume limiter settings are used to restrict the maximum volume allowed. Caregiver supervision is necessary to check the loudness and judge the volume levels are an appropriate level for the environment. Please refrain from using maximum volume. When necessary, in loud environments, please limit the exposure of maximum volume to short periods of less than 2 hours, take regular breaks and ensure the volume is returned to minimal levels once the enviromental noise has reduced. The reason for this advice is that the World Health Organisation (WHO) recommends 85db is the maximum safe volume level for up to eight hours, however this level is too quiet for noisy environments.
Therefore, Yoto have designed their headphones to not exceed the legal EU limit of S94dBA according to EN 55032-2 whilst being loud enough to ensure they are still useful. To help set volume levels, speak at a normal volume while listening to headphones, then lower the volume until you can comfortably hear your own voice.
Check product and power supply regularly for damage and in the event of damage, it must not be used until the damage has been repaired.
To avoid malfunction, damage to your Yoto Wireless Headphones or risking voiding your product guarantee (found at yotoplay.com) please observe the following:
Do not expose it to water or moisture whilst in operation. Clean with a dry soft cloth, if this does not remove the dirt, the Yoto Wireless Headphones must be disconnected from the power supply before cleaning.
Please do not use solvents, chlorides or chemical cleaning agents. Yoto Wireless Headphones are not splash or drip proof.
Do not expose it to heat from any source and avoid charging near radiators or placing it in direct sunlight. Leaving the product in hot or cold places will reduce the capacity and lifetime of the battery, and performance will be limited in below freezing temperatures.
Take care whilst handling to avoid mechanical damage to the unit.
Do not tamper with screws or dismantle the product in any way. The physical elements of the product are not serviceable in the field.
This device contains batteries that are non- replaceable because there is risk of explosion if the battery is replaced by an incorrect battery type.
Protect the power cable from being walked on or pinched. Unplug during lightning storms or when unused for long periods of time and ensure the mains plug adapter is readily available to disconnect the equipment.

REGULATORY COMPLIANCE INFORMATION

The Yoto Wireless Headphones complies with the relevant provisions of the RoHS Directive for European Union & RoHS Regulation for UK WEEE Statement for the European Union & UK:
In common with all Electronic and Electrical products the Yoto Wireless Headphones must not be disposed of in household waste or burnt, but instead taken to the nearest household waste recycling centre at the end of its usable life. Alternative arrangements may apply in other jurisdictions.
CE & UKCA Statement: Yoto Limited declares that the Yoto Wireless Headphones are in compliance with Directive 2014/53/EU and the Radio Equipment Regulations 2017. The full text of the UK and EU declarations of conformity are
available at the following internet address: yotoplay.com/pages/conformity
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Representative:
TianHeng Consulting, LLC, 392 Andover Street,
Wilmington, MA 01887, United States
Phone: +1-617- 997-4010

IC Warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation of this device is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

This Class [B] digital complies with Canadian ICES- 003.

Bluetooth Version: V5.0 + EDR compliant
Bluetooth Supported Profiles: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap
Bluetooth Distance Range: 10m/ 33ft
Carrier Frequency Range: 2.402GHz-2.480GHz
Battery: Built-in Grade A Rechargeable lithium polymer 3.7VDC/500OmAh
Charging Voltage: DC5V (50OMA)
Maximum Power Input: DC 5V_1A
Sound Limit: 85dB SPL limited
Charging Time: approx. 2.5 hours
Battery Life: 25 hours playback, stand-by 200 hours
Dynamic Frequency Range: 20Hz- 20kHz
S/N Ratio: 85+ 3dB
Drivers: 40mm
Driver Sensitivity: IOOdB
Total Harmonic Distortion (THD): < 0.1%
Impedance (Ohm): 32Q +15%
Max Radio Power: 15mW
FCC ID: 2AS6W- PRACXX01420
IC: 24624- PRACXX01420
Manufactured by Yoto Ltd.
London, ECIV 2NX, UK
Assembled in China, Guangdong
yotoplay.com
hello@yotoplay.com.