RoboVac User Guide
- June 6, 2024
- RoboVac
Table of Contents
RoboVac User Guide
Using Your RoboVac
-
Remove the sticker on the power switch, and the foam blocks beside the bumper before use.
-
If you cannot remove the objects surrounding the Charging Base, check whether RoboVac can return without assistance; if not, contact eufy customer service for help.
-
Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
-
When the Charging Base connects to AC power, the LED indicator on the Charging Base is SOLID WHITE.
-
Fully charge RoboVac before use. The LED indicator on the button breathes orange while charging, and turns solid blue when fully charged.
-
Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the Owner’s Manual for details.
Mopping
-
Do not use the mopping mode on a carpeted floor.
-
Wet the cloth before mopping.
-
-
-
-
-
-
-
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
-
a. Remove power cords and small objects from the floor that may entangle RoboVac. You can use the supplied cable ties to organize your wires and power cords.
-
b. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored high-pile rugs or rugs thicker than 1.02in / 26mm as they may cause RoboVac to malfunction.
-
c. It is strongly recommended to place boundary strips in front of fireplaces and certain areas (i.e. air vents) that may cause damage to RoboVac if entered.
-
d. Keep RoboVac away from wet areas during cleaning.
-
e. RoboVac may climb on top of objects less than 0.63in / 16mm in height. Remove these objects if possible.
-
f. Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored floors. It is recommended to apply the Boundary Strip(s) to block off areas where RoboVac may fall.
-
g. To keep RoboVac away from any area or item you do not want RoboVac to clean, apply the Boundary Strip(s) on the floor with adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>