MAGNAVOX MCH3383C 3-In-1 Fast Charging Station Owner’s Manual

MAGNAVOX MCH3383C 3-In-1 Fast Charging Station

IMPORTANT
Please read this manual before using the unit to ensure safe and proper use.

• The unit will generate the magnetic/electric field; never place any medical equipment; watches; credit card; magnetic record card or any magnetic sensitive products close to the unit.
• Only phones which can support wireless charging can be recharged by this unit. For details, please refer the user’s manual of your phone.
• The design of the unit is indoor use. Never spill or spray any type of liquid on the product.
• Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Clean only with dry cloth. Unplug this product from external USB Charging Devices before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
• Do NOT place any heavy object on the Charging Surface. It may damage the unit.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

LOCATION OF CONTROLS

1. Phone Wireless Charging Surface
2. Watch Charging Slot(need to install the Watch Charger)
3. TWS Earphone Charging Surface
4. LED Indicator
5. Type C USB Port(For Charging only)
6. Full size USB Port(For Watch Charger only)

OPERATION

1. Connect the Type C USB Plug from the supplied Type C USB connection cable to the Type C USB Port on the unit and then connect the Type C USB Plug to the Type C USB Port on your Type C Wall Charger (included) as illustrated below:

2. The blue Indicator on the unit will illuminate, and then turn to green.

3. Place your cell phone or TWS earphone onto the center of the charging surface as illustrated below until the Blue LED Indicator illuminate (or the charging icon appears on the device’s display) to start charging.

4. Connect the Watch charging cable (not included) to the full size USB port on the side of the unit. Install the Watch Charger (not included) into the Watch Charging Slot and then place your Watch onto the center of the charging surface as illustrated below.
   ( Note: If the location of the device is incorrect, charging will NOT proceed.)

5. Wait until your device finished charging as usual (the full charging indicators appear on your device display).

Notes:

1. To charge a cell phone or TWS earphone with this Charger, the cell phone or TWS earphone must support Qi standard wireless charging.
2. During charging, if the cell phone or TWS earphone has a cover or case, it may disturb or prevent the wireless charging function.
3. The charging transmission distance of the unit is up to 5mm, the thickness of cell phone cover or case can NOT extend 5 mm.
4. To maximize the charging speed, using the USB Wall Charger (included) equipped with USB-Power Delivery 30W.
5. Back of phone must be void of attachments or accessories to charge wirelessly.
6. To save energy, disconnect the Charger from the USB Wall Charger if not using it for an extended period of time.

GENERAL SPECIFICATION

Input: DC 5V 3A or 9V 3A or 12V 2.5A or 15V 2A
Output: 2.5W (USB port) + 3W (earphone charging surface) + 15W (Phone charging surface) (Total 20.5W)
Transmission Distance: Up to 5 mm

ACCESSORIES

• 1 x Owner’s Manual
• 1 x 3ft USB C to USB C Power Cord
• 1 x 30W Type C PD Wall Charger

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

LIMITED WARRANTY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>