MAGNAVOX MCH3368 Fast Wireless charging Phone Stand Owner’s Manual

June 5, 2024
MAGNAVOX

MAGNAVOX MCH3368 Fast Wireless charging Phone Stand

IMPORTANT

Please read this manual before using the unit to ensure safe and proper use.

  • The unit will generate the magnetic/electric field; never place any medical equipment; watches; credit card; magnetic record card or any magnetic sensitive products close to the unit.
  • Only phones which can support wireless charging can be recharged by this unit. For details, please refer the user’s manual of your phone.
  • The design of the unit is indoor use. Never spill or spray any type of liquid on the product.
  • Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Clean only with dry cloth. Unplug this product from external USB Charging Devices before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
  • Do NOT place any heavy object on the Charging Surface. It may damage the unit.
  • When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original  parts. Unauthorized substitutions may result in fire or electric shock or other hazards.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void user’s authority to operate this device.

LOCATION OF CONTROLS

  1. Wireless Charging Surface 2
  2. Blue & Red LED Indicators
  3. Micro USB Port(For Charging only)

OPERATION:

  1. Connect the Micro USB Plug from the supplied USB connection cable to the Micro USB Port on the unit as illustrated below:

  2. Connect the full size USB Plug to the USB Port on your USB Charger (not included) as illustrated below:

  3. The Blue & Red Indicators on the unit will illuminate & blink shortly, then Red indicator illuminate.

  4. Place your cell phone onto the center of the charging surface as illustrated below until the Blue LED Indicator illuminate (or the charging icon appears on the cell phone’s display) to start charging.

    (Note: If the location of the cell phone is incorrect, charging will NOT proceed.)

  5. Wait until your cell phone finished charging as usual, the Blue LED Inidcator will turn off
    (or the full charging indicators appear on your cell phone’s display)

Notes :

  1. To charge a cell phone with this Charger, the cell phone must support wireless charging.
  2. During charging, if the cell phone has a cover or case, it may disturb or prevent the wireless charging function of the cell phone.
  3. The charging transmission distance of the unit is less than 8mm, the thickness of cell phone cover or case can NOT extend 8 mm.
  4. To maximize the charging speed, using a USB Charger (not included) equipped with Quick Charger 3.0 USB port.
  5. Back of phone must be void of attachments or accessories to charg wirelessly.
  6. To save energy, disconnect the Charger from the USB Charger if not using it for an extended period of tim.

GENERAL SPECIFICATION:

Input: DC 5V/2A or 9V/1.67A
Output: 5W or 10W
transmission Distance: Up to 8 mm

ACCESSORIES:

  • 1 x Owner’s Manual
  • 1 x USB Connection cable (For Charging Only)

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,  may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MAGNAVOX User Manuals

Related Manuals