Shiji HD220E Touch Screen All-in-one Machine User Manual
- June 1, 2024
- Shiji
Table of Contents
Shiji HD220E Touch Screen All-in-one Machine
Product Information
Specifications
-
Model: HD220E
-
CPU/System: 1.50 GHz
-
Memory: 4GB DDR3
-
Speaker: 8, 3W*2
-
Wifi: 2.4G/5G Wi-fi (802.11b/g/n/ac)
-
Bluetooth: BT4.0
-
OS: Windows 10
-
Storage: 128GB M.2 HDD Drive
-
Screen Size: 21.5 inches LCD with Touch PCT
Touch -
Aspect Ratio: 16:9
-
Max. Resolution: Depends on the display
-
Brightness: Depends on the display
-
Contrast Ratio: Depends on the display
-
Display Color: 16.7 million colors
-
Power On/Off: Yes
-
Interface:
- Wifi RF: Yes
- USB Port: USB3.0 x 2, USB2.0 x 2
- Gigabit Ethernet: Gigabit Ethernet x 1
- HDMI: HDMI x 1
- Audio Output: Mic-in x 1/Line-out x 1
-
Electrical:
- Power Input: AC 100V~240V, 50/60Hz
- Power Supply: DC12V / 5A, 60W(Max)
-
General:
- Operating Condition: Depends on the environment
- Storage Condition: Depends on the environment
- Dimensions (WxHxD): 527.50mm(W)319.00mm(H)54.40mm(D)
Product Usage Instructions
1. System Appearance
The system has a sleek design as shown in the appearance diagram provided in the manual.
1.1 Appearance Diagram
(Insert description or image of the appearance diagram here)
1.2 I/O Panel Description
The I/O panel includes various ports for connectivity such as USB ports, HDMI, audio output, and more.
1.3 Mounting the VESA Mount
The back cover of the machine is VESA mount compatible with a hole specification of 100x100mm, allowing for easy mounting on VESA standard bases and brackets.
2. Precautions
Please follow these precautions to ensure the safe and proper use of the product: – Handle with care to avoid damage – Do not disassemble or modify the product – Follow all included instructions for setup and operation
3. Product Warranty
The product comes with a one-year warranty under specific conditions. Keep the original packaging for after-sales service and contact the dealer for maintenance if needed.
Frequently Asked Questions
- Q: What should I do if the product fails?
- A: In case of product failure, please contact the dealer for maintenance under warranty terms to protect your rights.
- Q: Can I disassemble or modify the product myself?
- A: No, it is advised not to disassemble or modify the product by yourself to avoid warranty voidance and potential damage.
Copyright 2021
All Rights Reserved Manual Version 1.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer.
TRADEMARK
Intel® and Atom™ brands are registered trademarks of Intel® Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Other names and brands may be claimed as the property of others.
Product Description and Checklist
Product Description
This product is a touch display all-in-one machine (with display and computer functions), mainly used for interactive display in restaurants and kitchens, intelligent panel interactive display, etc.
Standard accessories
- Standard accessories include the following:
- All-in-one touch display (with monitor and computer functions)
- Power adapter
- Touch screen
- Base (optional)
- Speaker
- user’s manual
System appearance
Appearance diagram
I/O panel description
Mounting the VESA mount :
The back cover of the mechanism conforms to the VESA hole specification of
100x100mm and is suitable for different bases and brackets of the VESA
standard.
Specification
SYSTEM
| Model| HD220E
---|---|---
CPU/System| Intel® Celeron® J3455, Quad-core, clock speed 1.50 GHz
Memory| 4GB DDR3
Speaker| 8Ω 3W*2
Wifi
| 2.4G/5G Wi-fi (802.11b/g/n/ac)
Bluetooth| BT4.0
OS| Windows 10
STORAGE| HDD Drive| 128GB（ M.2 INTERFACE）
DISPLAY
| Screen Size| 21.5″ LCD with Touch
TOUCH| PCT Touch
Aspect Ratio| 16 : 9
Max. Resolution| 1920 x 1080
Brightness| 250 cd/m² (Panel Typ.)
Contrast Ratio| 1000 : 1(Typ.)
Display Color| 16.7M
I/O| Power On/Off| Yes
| INTERFACE | Wifi RF | Yes |
|---|---|---|
| USB Port | USB3.0 x 2, USB2.0 x 2 | |
| Gigabit Ethernet | Gigabit Ethernet x 1 | |
| HDMI | HDMI x1 | |
| Audio Output | Mic-in x 1/Line-out x 1 |
ELECTRICA L
| Power Input| AC 100V~240V, 50/60Hz
Power Supply| DC12V / 5A
Power Consumption| ****
60W(Max)
GENERAL
| Operating Condition| ****
Temp.: 0°C ~ 50°C, Hum.: 10% ~ 80%
Storage Condition| Temp.: -20°C ~ 60°C, Hum.: 10% ~ 80%
Dimension (WxHxD)| ****
527.50mm(W)319.00mm(H)54.40mm(D)
Other| VESA| 100*100mm
Precautions
Products
- Do not cover or block the cooling holes at the back of the body to prevent the body from dissipating heat.
- Do not attempt to disassemble, disassemble or modify this product by yourself, so as to avoid product damage and danger.
- Do not directly touch the screen surface with your fingers, it is easy to scratch the screen surface, and the oil on the skin adheres to the screen and will be difficult to remove.
- Do not squeeze the LCD panel forcefully to avoid damage to the panel When the body is locked on the Wall Mount, for safety reasons, M4 screws with washer and spring washer must be used, and the length is between 8 and 10mm.
- Use of screen holders other than the included stand must meet the standard VESA 100 x 100 mm specification.
Power plug
Do not remove the ground wire connector from the plug. If the product is not planned to be used for a long time or the power socket/plug is damaged, please unplug the power cord from the power plug.
Power cable and signal cable
- Please do not let any object press against the power cord or signal connection line.
- Please do not let the power cord or signal cable of this product pass through aisles, or places where people may often walk to avoid the wires being stepped on.
- Please do not overload the power outlet or power cord.
- Please do not place the power cord or signal cable of this product in a place with heavy humidity.
Operation environment
Do not place this product on an unstable cart, shelf or table, this product may be seriously damaged by falling. Please use this product in a well- ventilated place. Do not place this product in an environment that is too hot, too cold, too humid, exposed to direct sunlight, and has a lot of dust.
Product Warranty
After consumers purchase the product, please keep the carton and the packaging materials of Styrofoam to ensure the safety of the after-sales service product delivery. This product is guaranteed for one year under the conditions of guaranteed use. If the product fails, please contact the dealer for maintenance to protect your rights.
The non-warranty scope is as follows:
Damage caused by careless use or error. Failure to follow the instructions included with the product. Disassemble and modify this product by yourself. Damage caused by flood, fire, electric shock and other irresistible factors. Damage caused by improper handling.
FCC Statement
- changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.