Bar and Neat Pad Zoom Rooms System User Manual
- June 6, 2024
- neat
Table of Contents
Neat Ber Pro & Neat Pad
User Manual
Video conferencing device
Neat Bar Pro packs a stack of tech into a simple and elegant slimline device.
It’s capable of driving three large screens, has two extreme resolution
cameras, a multiple microphone array, and three full-range speakers.
Ideal for delivering superior-quality audio, video, and other unique
capabilities to your huddle, focus, meeting, and conference rooms, Neat Bar
Pro comes with a dedicated Neat Pad controller and integrated environmental
sensors.
Simple setup
All you need is in the box, including mounts, cables, and clear instructions. So it’s easy for anyone to install and set up. above or below one, two, or three screens.
Neat Ber Pro
Neat Bar comes with everything you need to get started, including cables, wall mount, screen mount, and table stand.
In the box
Neat Bar Pro: Video conferencing device
HDMI cable: 6.5ft (2m)
Ethernet cable: 9.8ft (3m)
Power cord: 9.8ft (3m) Mount adapter, wall mount, screen mount and table
stand| 4 x M8 screw (0.94 in / 24 mm) for VESA mount 4 x M6 screw (0.94 in /
24 mm) for VESA mount 2 x spacer (to secure parallel TV mount)
1 x 5 mm hex key for the screen mount
1 x 2 mm hex key for the mount adapter2 additional screw bags for dual or
triple screen setup
4 x M8 screw (0.94 in / 24 mm) for VESA mount
2 x 4 x M6 screw (0.94 in / 24 mm) for VESA mount
4 x spacer (to secure alignment of all screens)
---|---
Screws for mounting to the wall are not included. Mounting on a wall should only be performed by qualified personnel in line with applicable facility and state regulations. The wall and the mounting equipment must safely withstand the load of the product.
Neat Pad
Neat Pad works as a Controller for Neat Bar and can also be configured as a Scheduling Display for the Meeting Room. It comes with everything you need to get started, including cables and mounting options.
In the box
Neat Pad: 8-inch touch screen
2 x Ethernet cable: 9.8ft (3m) + 16.4ft (5m)
PoE power adapter
Mount adapter, side mount, and wall mount| 4 x M4 screw (0.30 in / 7.5 mm) for
the wall mount
3 x M4 screw (0.19 in / 4.7 mm) for the side mount
1 x 2.5 mm hex key for the adapters
1 x 2 mm hex key to secure Neat Pad to the wall mount
---|---
Screws for mounting to the wall are not included. Mounting on a wall should only be performed by qualified personnel in line with applicable facility and state regulations. The wall and the mounting equipment must safely withstand the load of the product.
Mounting & releasing
Mounting
Slide Neat Bar onto the selected mounting option (1). When fully inserted tilt
Neat Bar back to horizontal and check if it is secure by carefully pulling it
towards you.
Releasing
Tilt Neat Bar fully forward (1). Pull towards you (2) until the unit stops and the red release lever appears (3). Push the release lever up and pull Neat Bar gently off the mount adapter.
Size & weight
Neat Bar Pro
Width: 35.04 in (890 mm)
Height: 3.15 in (80 mm)| Depth: 315 in (80 mm)
Weight: 6.83 pounds (3.1 kg)
---|---
Neat Pad
Width: 7.8 in (198 mm)
Height: 1.7 in (42 mm)| Depth: 5 in (127 mm)
Weight: 115 pounds (520 g)
---|---
Setup & connectivity
Setup
Use the provided cables to set up Neat Bar. Connect the cables according to
the illustration. Display Cables marked — are included. Cables marked Internet
connection •• • are optional and not required for basic use Video service of
the system.
Requirements for a complete setup
Display Internet connection Video service
The 16.41t (5m) Ethernet Cable provided is not to be used for InovSl installation. In-wall cable routing ¬ed oily be performed by qualified personnel using appropriate equipment.
Environmental Requirements
Ambient operating temperature: 32° to 95° F (0° – 35° C)
Storage temperature: 5° – 149° F (-15° – 65° 0)
Relative humidity: 20% to 80%
Network standby: <8W (after 20 minutes)
Additional Product Information https://neat.no/bar-pro
Neat Bar Pro and Neat Pad-User Manual rev02