Spireon ZAZU Wireless Bluetooth Camera Instructions
- June 6, 2024
- Spireon
Table of Contents
Wireless BLE camera
|
---|---
ZAZU is a lower power consumption BLE camera device, which can operate with an
internal rechargeable battery. Zazu also can get power from solar panels. ZAZU
can be installed anywhere and anytime for keeping your valuables safe.
IT’S RELIABLE
The ZAZU is a high-performance, IP45 rated device. It includes an integrated
BLE5.0 and a 200Mpix camera, it can communicate with a BLE5.0 device.
IT’S SIMPLE
With rechargeable batteries, the ZAZU is easy to install on cars, trucks,
trailers. ZAZU can be wake-up by the message coming from BLE 5.0 host device.
IT’S FUNCTIONAL
The ZAZU is a simple BLE camera when the BLE host device gets any event need
to capture the picture, it can trigger the BLE camera via BLE and then the BLE
camera will wake up and capture pictures send to the BLE host immediately.
HIGHLIGHTS
- BLE 5.0 for lower power consumption
- 2 LEDs status indicators for work status and BLE status.
- Camera for imagine capturing
- Infrared LEDs for the camera working in dark environment
- IP67 sealed,
Specifications
BLUETOOTH
- BLE 5.0 lower power consumption
BATTERY INFORMATION
- Battery Type: 4 * 18650 Li-ION 2p2s
- Chargeable battery [email protected]
ENVIRONMENTAL
- Operation Temperature: -30°C to +60°C
- Storage Temperature: -40°C to +80°C
- Operation Humidity: 20% to 90% (non-condensing)
- Storage Humidity: 10% to 95% RH (non-condensing)
ELECTRICAL
- Operating Voltage:12VDC
- On-battery
- Sleep/Hibernate: <100uA
- Tracking 45mA Typical
Camera
- Camera: 2MPixels
APPROVALS
- FCC
- PTCRB & Carrier Approved
Positioning Universal Inc
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To comply with FCC RF exposure compliance
requirements, this grant is applicable to only Mobile Configurations. The
antennas used for the transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
Asiatelco Technologies Co. | 4611 Teller Ave, Newport Beach CA 92660