QUEST Juiced TWS Earphone User Manual

June 6, 2024
Quest

Bluetooth Pair

Open the charging compartment, remove the earphones, the headset will automatically turn on and pair, the matching process takes about 5 seconds (the indicator light is: the headset is red and blue alternately flashing quickly, after the successful pairing, the red and blue lights flash slowly).
Find the corresponding Bluetooth name F9 from the Bluetooth list of the mobile phone and click pairing. The voice prompt connection is successful in about 5 seconds. The headphone indicator flashes blue light every 5 seconds.
When using one ear, just take one of the headphones, select F9 from the Bluetooth list of the phone, and click Pair. After the pairing is successful, you can use it.

Charging Indication

The display will shows the current power when charging for the charging case. It’s full if it shows 100. Put the earphone to the charging case, the earphone will auto power off and start charging, the red light of the earphone and display will stay light after fully charging,the light will be off.

ON/OFF

When putting earphones in a charging case, they will automatically turn off and charge. After the earphone is taken out of the charging compartment, it will automatically turn on,  and the long touch function area will be turned off for 4 seconds; after turning off, the long touch the function area again for 3 seconds will be turned on.

Call

After the earphone is connected to the phone, you can make a call. Touch the headset function area to answer the call, long touch will reject the call. During a call, touch the function area to hang up.

Music

When playing Bluetooth music, tap the function area, the music pauses, and tap again to continue playing music. Touch the function area triple: the vice earphone volume decrease, and the main volume increase. Touch the function area twice, the vice ear will play the previous song, and the main ear will play the next song.

Precautions for use

  1. Headphones should be stored in a dry and ventilated environment to avoid contact with oil, water vapor, steam, moisture, and dust, so as not to affect product performance.
  2. Avoid using irritating, organic solvents or items containing these ingredients to clean the headphones.
  3. The earphones should be correctly and professionally used according to the requirements. Pay attention to the influence of the use environment on the headphones. To ensure a smooth connection, it is recommended that the distance between the mobile phone and the earphones be within 10 meters.
  4. If the headset is not connected or the communication is not smooth, etc., please do not disassemble the headset body and its accessories, otherwise, it will not be guaranteed.
  5. Charge the earphone compartment, please use the standard car charger or the charger specified by the company.
  6. To ensure that you use the headset normally, make sure that the headset is fully charged.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV  technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals