SuperFish 8715897244506 SF Automatic Twilight Sensor Instructions
- June 6, 2024
- SuperFish
Table of Contents
SuperFish Twilight Sensor
Translation of original manual.
General instructions
Read this manual carefully before using this device. Keep this manual for future reference.
Use
Suitable for SuperFish LED lighting with applicable cable connection. For outdoor use.
Safety
Always follow the safety instructions from the manual of the SuperFish LED lighting and instructions as follows to ensure the device is operated safely. Failure to follow these instructions may endanger persons or the environment.
- Don’t use the product if the device, cord or plug is damaged. Return the device to your dealer for repair or recycling. A damaged cord or plug cannot be replaced, the device should be recycled.
- Be careful with the combination of water and electricity. Do not operate with wet hands. Dry hands before carrying out maintenance.
- Always switch off all devices at the mains supply before maintenance.
- This device can be used by children aged from 8 years and above, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instructions concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and maintenance of the device shall not be done by children without supervision.
Function
Twilight sensor, automatically switches the LED lighting on and off when the outside becomes dark and light respectively.
Installation
Fig.
Make sure the adapter is unplugged and disconnected from the LED lighting. Connect the long end of the Twilight Sensor cable to the adapter. Hand tighten the union nut to prevent moisture from entering. Connect the other end to the cable of the LED lighting and hand tighten the union nut.
- Insert the Twilight Sensor ground pin upright and almost completely into the ground, ensuring the sensor is not covered.
- Plug the adapter back into the socket.
- Test it by covering the Twilight Sensor (with your hand) and the LED lighting will switch on.
Recycling
This
symbol indicates that this product (if it is discarded) may not be disposed of
with normal household waste. Instead it must be handed in at an official
collection centre (e.g. HWRC). Or can be returned to the dealer when
purchasing a similar new product.
Follow the applicable rules in your country for the separate collection of
electrical and electronic products. Separate collection and recycling are
better for the environment, public health and reduces waste.
Warranty
2 years manufacturer’s warranty on materials and construction defects. Devices must be returned complete with all components, accompanied with an official proof of purchase confirming a purchase date for any warranty claims. Incomplete devices of which parts are missing, and devices without proof of purchase are not eligible for warranty. After receiving and checking, we will determine whether the device will be repaired or replaced. For a device repaired or replaced under warranty, the remaining time of the original warranty period applies. Carefully read the instructions on installation, use and maintenance. Damage due to incorrect use, damage due to immersion in water, damage due to contamination or not cleaning the device and damage to the cable are not covered by the warranty.
Always keep the proof of purchase, without proof of purchase the warranty will be void!
Produced in China for:
www.aquadistri.com
Vlietweg 8, 4791 EZ Klundert
The Netherlands
11-2021-MH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>