XLIFE X3 Smart Visual Ear-Clean Rod User Manual

June 6, 2024
XLIFE

Suitable for adults and children
Open XlifeX3

  1. QR scan the QR code to download the apphttp://bebird.cn/app/xlife-en.html
  2. Open APP Click Xlife X3
  3. Press and hold the power button to on the ear cleaning rod

Connect product WiFi

  1. Connect Product Wi-F, “Xlife X3 XXXX
  2. Back to Bluebird app Enter and start to use it

Accessory replacement

Unscrew the ear spoon head and pull out the silicone ear spoon for replacement. Screw and plug the ear spoon head well.

Accessory

  1. Metal & Silicone wrapped Ear Spoon (Small) xl Haem less ear cleaning

  2. Q-Elastic Big ear pick tips x 1
    Global First PC and Silica Gel
    Synthetic Earspocn

  3. Charging Cable x 1
    Micro charging cable

Product size

Troubleshooting

Trouble Solution
starting up and no response Please use the attached charging cable for quick

charging. The charging time is 35 minutes
The camera does not turn on| Close and open the cover to try a fewtimes
APP quite quickly| Delete the ex sbngAPP and rescan the QR code for installation
Installation of tools in the accessory barrel is not smooth| Unscrew the ear spoon head and pull out the silicone ear spoon for replacement. Screw and plug the ear spoon head well
Rod’s power indicator is red| Please use the attached charging cable for charging. The charging time is 35minutes
The display on the app is not reading properly| Disconnect the phone with the product and open the cover to restart it, then set the phone to reconnect the product
WiFi connection is unstable, sometimes it is disconnected in seconds| Gose and open the cover to restart rod and restart the app in phone to connect rod

If you still have problems with the above procedures, please contact our Customer Service Representatives directly for further assistance

Hazardous substance

Part name Hazardous material
(Pb) (Hg)                (Cd)

Panted Circuit
Components| X| 0| 0| 0| 0| 0
Case| 0| 0| 0| 0| 0| 0
Plastic rubber
accessory| 0| 0| 0| 0| 0| 0

This form is formulated in accordance with S.I/T 11364
0: represent the hazardous maternal ratio is below GB/T26572-2011
x: represent the hazardous maternal ratio is over GB/T26572 2011

Brand Xlife
Product Name Smart, visual ear cleaning
Model XlifeX3
Rod weight 13g
Network standard IEEE 802.11 b/g/n
Antenna Internal FPC antenna
Working frequency 2.4Ghz
Image transmission rate 20fps
Image sensor CMOS
Working temperature 10~45°C
Battery 130mAh lithium battery
Battery life 35 minutes
Charging time 35 minutes
Input current DC 5V 300mA
Lens diameter 3.5mm
Optimum focal length 15~50mm
Depth of field 5~20mm
Pixel 3 Mega-Pixels
Gyroscope 3 axis

Attention

Attention

  1. When cleaning the lens, please wipe it carefully with a professional alcohol cotton swab.
  2. Make sure the ear spoon is well installed before using, to prevent the ear spoon from falling off.
  3. Please don’t use it while you are moving, and protect yourself from being hit by others.
  4. It is forbidden for children to use this product alone in order to avoid accidental harm.
  5. Please do not put the product in liquid to avoid
  6. Product built-in polymer battery, so it must be charged once a month If it is not used frequently.
  7. Avoid product exposure to sunshine directly, especially the accessories, in order to avoid softening.
  8. During using it, the temperature of the product will rise slightly(Data from Xlife lab, the maximum temperature of the machine doesn’t exceed about 35°C), please rest assured to use.

Warranty

User info:—————-
User name:————–Telephone number
Address:——————
Seller:———————Telephone number

Enable everyone to enjoy visible ear cleaning

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals