MONOPRICE 43523 Magnetic and Wireless Powerbank 5000mAh User Manual
- June 6, 2024
- Monoprice
Table of Contents
Magnetic & Wireless Powerbank 5000mAh
Compatible with Magnetic COVER
User manual
ILLUSTRATION
Specification
Size | 3.97.2.54’0.76 Inch |
---|---|
Model No. | 43523 |
Capacity | 5000m/4i/18.5VA) |
Type-C Input & Output | PD18W(5V/3A,9V/2A,12V/1.5A) |
Wireless Output | 15W Max. |
Total Output | 5V/3A |
Operation Instructions
Wireless charging: Put a wireless charging phone on MSA05 (Phone 12
series can be attracted by magnetic force directly, others need to be used
together with a metal ring). Press the power button, and the indicator light
will turn on, 12 sec the (wireless LED indicator) light turns off and just the
Power LED keeps on.
Type-C charging:
use a Type-C cable to connect with the MSA05, the other end connects to the
mobiles, the MSA05 will charge for the mobiles automatically
Recharge the power bank MSA05: Connect a USB cable (include) to the USB
adapter, connect the other end of the Type-C port to the input port on the
power bank. Plug the USB adapter into the outlet to begin charging.
Attention
Read all the instructions before using the product. Do not subject the product
to direct sun and high temperatures. Do not place on a surface that is wet
from water or cleaning solvents. Do not puncture, throw, drop, bend or modify.
Stop using the product when it generates an unusual smell, heating, distortion
or any other abnormalities. Please keep it out of the reach of children.
CORRECT DISPOSAL FOR THIS PRODUCT
This marking indicates that this product should not be disposed of with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
CAUTION
Risk of Fire and Burns. Do Not Open, Crush, Heat Above 60t, or Incinerate.
Follow Manufacturer’s Instructions.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>