Bakeey KT-BW01 Bamboo Wireless Charger Instructions
- June 6, 2024
- Bakeey
Table of Contents
Bakeey KT-BW01 Bamboo Wireless Charger Instructions
Product Dimensions
- Product name: Bamboo wireless charger
- Product mode: KT-BW01
- Product size: 2714.51.5cm
product packaging
Electrical properties
- Operation Temperature: -10~40℃
- Storage Temperature: -45~75℃
- Efficiency: >70%
- Operational Frequency : 127.6KHz
- Input DC: 5V/9V/12V 2A
- Output: 5W/7.5W/10W/15W
- Charging distance: 4-9mm
Product function diagram
- LED Modes
LED CONTROL OPTION
|
LED
|
OPERATIONA STATES
---|---|---
Standby
|
Power Transfer
|
Charge Complete
|
FAULT
|
Dynamic Power Limiting
|
Fod Warning
LED 1 green
|
On
|
Off
|
On
|
Off
|
Off
|
Off
LED 2 red
|
Off
| On| Off| Blink| Blink|
Blink
Notes: Use the QC3.0 adapter for the best user experience.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>