Bakeey M18 Plus Smart ECG Temperature Watch User Guide
- June 6, 2024
- Bakeey
Table of Contents
BAKEEY
Bakeey M18 Plus Smart ECG Temperature Watch
Watch quick instructions
Parts introduction
Instruction for Charging
It needs to be charged and activated before using the watch for the first time.Use the equipped magnetic charging cable to attach to your hand The metal point on the back of the watch, the other end of the charging cable Connect to USB charging head or computer USB
Install watch APP
Scan the QR code or enter the major application markets Download and install “SmartHealth” Device requirements: iOS 9.0 and above; Android 4.4 and above, Bluetooth 4.0 is supported. (Open the mobile client to .., set up personal information) (Switch to the “Device” page and .., click on the binding device)
Main function interface
Main interface/dial
On the main interface, long press the touch screen or in the APP menu, click “theme selection” to enter Switch the main interface/dial. The dial has 5 styles.
On the main interface, press the side button or swipe up to enter the function page, and then press the side button or Swipe down to return to the main interface.
Pedometer/Distance/Calories
View steps, distance, calories burn in real time It can synchronize apps in
time to view motion data.
Body temperature
Switch to the temperature test interface to enter the real-time temperature detection.
the monitoring data can be updated to the APP synchronously, and there is a
test report.
Note: When testing body temperature, the bottom temperature must be in
full contact with the skin (tested after 10 minutes of wearing). The body
temperature test will be affected by the temperature difference of the
environment, which only serves as a warning reminder. For details, please
refer to medical professional equipment and doctor diagnosis
Heart rate monitoring
Switch to the heart rate monitor interface, Heart rate • monitoring, in real-
time The measurement data can be synchronized with the APP in real time with a
test report.
ECG
Long press the side electrode on the ECG test interface, thethree electrodes are in full contact Skin, test, test report needs to be viewed in APP.
Blood pressure monitoring
Switch to the blood pressure monitor interface, to enter • real-time
monitoring. The measurement data can be synchronized with the APP in real time
with a test report.
Note: When measuring blood pressure, please measure by the correct
posture.The test result is for reference only, Cannot be used as medical data.
Blood oxygen interface
Switch to the blood oxygen test interface to enter the blood oxygen real-time detection and measurement data It can be updated to the APP synchronously, and there is a test report.
Respiration rate interface
Switch to the respiratory rate test interface to enter real-time detection and monitoring of respiratory rate The data can be updated to the APP synchronously, and there is a test report.
Sport mode
Click on the sport mode interface to enter the sport mode. There are multiple
sport modes to choose from.
Click the exercise icon to enter the corresponding exeTcise mode detection.
Swipe up and down to switch sports Mode, click to start calculation, swipe
right to exit the current sport mode.
Weather information
The weather page displays current weather, air quality information, and tomorrow Condition. Weather information needs to be connected to the smartphone before data can be obt ained If you disconnect for a long time, the weather information will not be updated.
Sleep monitoring function
When you fall asleep, your watch automatically determines that you’re in sleep
detection mode, automatically detects how long you’ve been asleep/light
sleeping/sleeping all night, calculates the quality of your sleep, and updates
your sleep data to the APP synchronously.
Note: Wear your watch to sleep before you have sleep data.
Stopwatch
Tap the stopwatch to enter the stopwatch function, and swipe right to exit.
camera
In the connected state, tap the camera to remotely take pictures with the mobile phone. Click to take a photo and swipe right to exit.
information
Click on the message to view the content of the message, scroll up and down to
turn pages. Swipe right to exit. About
Click the about icon to display the device model name and last four digits of
the Bluetooth name brightness
Click the brightness icon to freely select the screen brightness. smart phone
Raise your wrist
Tap the wrist lift icon to enter, you can choose to open or close the wrist
lift.
Reset
Click the reset icon to enter, you can restore the factory settings of the
watch.
Shutdown
Click the shutdown icon to enter, you can shutdown.
Other feature reminders.
The reminder function needs to set the on reminder switch on the APP side and
keep the phone and watch connected successfully in Bluetooth to the message is
a vibration reminder.
ECG detection
Detect ECG by clicking “start” on APP. It will enter automatical detection mode after starting. Press your finger against the side electrode of the bracelet, please do not move your finger and stand still.
Precautions
- Do not use an adapter with a current over 2A. Charging time is around 2-3 hours
- Do not charge after the device was water damaged
- This is an electronic monitoring product, data received from it cannot be used as medical basis.
- Blood pressure testing tip:
- Keep your body relaxed and still while testing.
- Keep device at the same height as your heart, and don’t talk while you are testing