Zine Z-1000 Sleep Care Lamp User Guide
- June 6, 2024
- Zine
Table of Contents
SLEEP CARE LAMP
Components
■ Z-1000 ■ C type cable ■ User Guide
Name of each part
Wheel & button (Operation / On&off button)
Indicate LED
Znie Main body
Charging terminal
Bluetooth connect button
Before using
- Please read carefully and keep this guide for reference later on.
- Please download 7nie* application in Google play store & Appstore
- You can refer to our website(honeyit.co.kr) or FAQ in application for warranty / detail
- Please connect the power cable when using SLEEP CARE mode or using the product for a long time
How to run
Operation
|
Statue
---|---
Wheel & Button PUSH (3sec)
|
Turn On/OFF
Turn Wheel & Button(left/right)
|
OFF LED Color change
Wheel & Button PUSH
|
LED Brightness
Wheel & Button
|
Sleep Mode On/OFF
*Sleep mode operated by operating the main body is not provided with morning care mode.
How to connect with bluetooth
- Power on the Znie and turn on Bluetooth on your mobile device.
- When you run the Znie App, it automatically connects (pairs).
Tip) If not automatically connected (pairing), press and hold the Bluetooth button on the back of the body to enter pairing mode. When entering pairing mode, the BLUE LED will rotate on the status LED on the Znie. Select ‘Znie_Z1000* on the Bluetooth setup screen of the mobile device to connect.
When the connection is complete, the BLUE LED will stop rotating.
- Pairing between Znie and mobile devices only needs to be done once.
- When Znie and the App are disconnected, the BLUE LED flashes on the status LED and turns off power after one minute.
Using Znie with Application
- Complete connect Znie & Smartphone
- You can use all modes you want in Znie application.
Znie App
A) Main page of Znie application (After connecting)
B) Sleep mode: Set wake up time, and the sleep care will be started with start button.
C) Color Therapy 1: You can access to LED Color Therapy.
D) Color Therapy 2: Znie will recommend suitable LED color therapy for each situations.
E) Healing Mode: It help you to get calm and meditation.
F) Desk Mode: It help you to get more concentration.
G) Setting: You can access to setting mode cogwheel icon of each page.
There are user setting and FAQ.
How to charging
Connect USB C type charging cable. You can use adaptor, portable battery, Laptop or PC. We recommend abaptor.
Indicate Battery state
Battery
|
Indicator
---|---
100%
|
LED “Pure Green”
Below 5%
|
LED “Red” Blink
Charge
|
LED “Red”
- After fully charging the product, it can be used for 5 hours with maximum
brightness of LED lighting. But, It depend on Color, Brightness and service environment.
When using Sleep Mode, it is recommended that you connect the product
to the power source.
Cautions
Please comply with below to safety use.
- Please charge the product by using the charging cable and power adapter before using the product. Charge only with adapters certified by international safety standards such as KC and CE. Damage caused by use of unauthorized adapters is not guaranteed by the manufacturer. While charging, the charging adapter should be close to the wall outlet, and it should be placed within easy reach.
- Users must not modify or remove the parts at their discretion. The battery may be damaged and it may cause overheating and injury.
- Applying excessive heat or shock to the product may cause a malfunction and breakdown of the product
- Children, infants or pets must not be allowed to suck and bite the product. They must not be accessed to the product.
- The operating temperature range of the product is 0-85°C and proper storage temperature is -10°C-50°C. Using the product out of the above temperature can cause
Specification
Product Name
| Zine| Material| PC,ABS
---|---|---|---
Model
| Z-1000| Verification|
R-R-Hny-Z1000
Rated Input Voltage
| DC 5.0V, 1.5A| Country of|
Made in Korea
Battery capacity
| 2,600mAh| Manufacturer|
Honey IT Inc
Size
| 97 X 97 X 152(mm)| A/S|
070-4202-5900
Weight| 370(g)| Website|
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IMPORTANT NOTE : FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>