Huang Bo Toys Factory HB-PH12-24 Amphibious Spheric RC Toys Instructions
- June 6, 2024
- Huang Bo Toys Factory
Table of Contents
Instruction
R/C AMPHIBIOUS SHARK REMOTE CONTROL CAR
Dear customers:
- Thank you for purchasing our RC model car. As we always strive to develop and improve our products, we reserve the right to make changes to technologies, functions, materials, and design at any time without prior notice.
- No claims will be accepted for any slight differences between the product you have received and the data or illustrations in the manual,
- Reese read this manual carefully before using the product
- Please keep this manual for future reference and in the event that the product is passed on to a third party,
Warnings!
Improper use of the product may result in serious injury or property damage.
The manual contains technical safety regulations and information on
maintenance and operation.
Warning This model car is not safe for children under the age of three,
as the small components may cause harm to them. Remove all packing materials
and wire fasteners before giving the model car to children.
****This symbol indicates not to mix exhausted batteries, rechargeable
batteries,. button batteries, ; rechargeable battery packs, equipment
batteries, and discarded electrical equipment in household waste, because they
are harmful to the environment and health Please protect the environment and
your health and tell your children: to properly dispose of the used batteries
and discarded electrical equipment, Do not mix different types of batteries,
or the old and new batteries. Connect the correct polarity of the battery.
Take the exhausted batteries out of the product. Do not charge the non-
rechargeable batteries, as it may cause an explosion: Take the rechargeable
battery out of the toy before charging. Avoid short circuits in the power
terminal. Rechargeable batteries can only be charged by adults or children
above the age of eight. For batteries and charger used for the model car,.
check OS power wires, plugs, casing, and other components regularly for any
damages. If there are damages, do not use them before repair,
Safety instructions
- The RC model car is designed for amateurs and can be used only in an open space, Warnings! Do not use RC vehicles on the road: traffic,
- Do not play it on grass surface Do not use it to transport goods, people or animals.
- Do not play it outdoors in rainy or snowy weather.
- Do not drive the RC car near the river, pond, or lake, avoid the risk of falling Into the water. Do not drip* on a runway that is completely covered with sands.
- Do does not expose the RC car to direct sunlight,
- Put the car gently on the ground and don’t throw it out at wilt.
- Avoid falling from a platform or ramp higher than 5em (O.16ft).
- The model car must be checked before and after the operation. Tighten the screws or nuts that may be loose.
- Do not modify the model car without permission because this may cause damage to the car or serious injuries,
Rechargeable batteries available (note to buy the correct model)
-
Remove the battery box cover with a screwdriver insert the rechargeable battery into the car in correct polarity: lighten the battery be! cover with a screwdriver.
Install batteries into the remote controller. -
Open the battery box cover with a screwdriver and iii rats the non-rechargeable battery into the remote controller in correct polaritypTighten the battery box cover with a screwdriver.
How to operate the RC model car? -
Please read the illustrations and instructions carefully for the proper operation of the car.
How to charge batteries? (Note to charge the rechargeable batteries only) -
Please read the illustrations and instructions carefully for proper charging of the battery. For first-time usage, charge the battery for at least 4 hours. For subsequent usage, charge 3 to hours.
Solutions for breakdowns
The car does not work
• Set the switch of the transmitter and the vehicle to the “ON” mode.
• Check if the battery or battery pack is connected incorrectly polarity.
• Check the battery contact for any damages.
• Check the battery for power capacity.
• Check the car and controller for correct connection (see 4).
The car cannot work normally: the launch distance is too short!
- Is the battery power decreasing?
- Are there any other RC car devices transmitting at the same frequency nearby?
- Are there metal railings causing interference?
- Are there walkie-talkie/wireless networks nearby causing interference?
- When the car is hot, turn off the car and the remote control switch and let the car cool for about 30 minutes.
Install the controller batteries
Install Battery pack (Rechargeable) In the car. Be mindful of the model version.
Two ways to charge the battery pack/inflate tries
Rc car user guide
| When going straight in the water, the left push lever of the remote control
is pushed up and the car will swim forward. The left push lever of the remote
control pushes down and the car will swim backward.
---|---
| Push the right push rod of the remote control upwards and the car will move
forward. Push the left push rod of the remote control downwards and the car
will walk backward.
| Push the right push rod of the remote control to the left and the car will
rotate to the left on the spot Push the right push rod of the remote control
to the right and the car will rotate to the right on the spot.
| After the remote control gyroscope switch is turned on, push the left push
rod upwards, after the car walks forward for a certain distance, the push rod
instantly stands backward.
| After the remote control car stands up, push the left push rod of the remote
control upwards and the car will move forward. The pushrod is pushed down and
the car will walk backward.
| After the remote control car stands up, push the right push rod of the
remote control to the left, and the car will stand and rotate to the left.
Push the pushrod to the right and the car will stand and rotate to the right.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.