Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health Watch User Manual

June 6, 2024
Shenzhen Nakinmi Smart Technology

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health Watch

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch

Watch appearance

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-1

Install APP

Scan the QR code below or enter the “app store”, download and install from major Android application markets (App Store/Baidu Assistant)’V Band”

Install the system

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-3

Instructions for first use

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-4

Audio Bluetooth connection

Enter the Bluetooth settings of the mobile phone, find the Audio corresponding to the product’s Bluetooth model (such as MVxx-Audio). click Connect and it shows connected, which means the connection is successful. (To make calls and listen to music, you need to connect audio Bluetooth to use)

Bracelet function

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-5

Instructions

  1.  When using 1he watch for the first time, make sure that 1he watch is fully charged. The watch ..,;11 automatically start after charging (please charge in the direction shown below}. (Note: After the charging is completed. pul out 1he charging cable from the USS charging head to avoid 1he magnetic charger from being attracted to metal products and causing 1he charging cable to be defective) Align the charging head and fit the magneticcharging port until the charging icon appears on the watch screen (use a 5V charging head for continuous charging for 2-3 hours}.
  2. Turn on: In the shutdown state, press and hold the power button for 3 seconds to turn on. The watch will automatically turn on when charging.
  3. Shut down: When the watch is turned on, long press the power button, the page will pop up the shutdown interface, after selecting, the watch will shut down. or slide down on the main interface. click the settings icon to enter the settings interface, then click system settings, and then click Shut down, the watch will automatically shut down (you can also restart and reset in this interface}.

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-7

Set interface

As shown in the figure below. slide down to enter the shortcut interface, you can turn on the flashlight. adjust the brightness, do not disturb mode, turn on and off the audio Bluetooth, find the phone. enter the settings and other functions.

  1. Click the brightness adjustment icon. click + to increase brightness, and click-to decrease brightness.Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health Watch-8
  2. Quick tool enter the do not disturb mode, choose to tum on and off do not disturb, please set the do not disturb time period on the APP.
  3. Swipe right to enter the music playing interface, slide up to enter the message interface, slide down to enter the shortcut interface, and slide left to enter the function list interface as shown in the figure below.Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health Watch-9
  4. Click to enter the setting interface, you can choose the theme, the screen bright time, system settings, style s¼itching, and you can enter the phone search interface.Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health Watch-10

Step counter in Interface

As shown on the left, it is the step counter interface of the bracelet This interface mainly displays the total number of steps counted on the day, and can also display 1he total number of calories burned on the day. This content can also be viewed in the mobile APP after connecting the bracelet

Heart rate interface

As shown on the left it is the heart rate measurement interface. The content can also be viewed in the mobile APP after connecting the bracelet When measuring, the value will jump and change in real time, and the watch will automatically stop measuring after 60 seconds.

Blood pressure interface

As shown on the left it is the blood pressure measurement interface. This content can also be viewed in the mobile phone Af’P after connecting the bracelet the same as the heart rate rneasu-ement method(Please keep still during the measurement Do not press the button to switch the interlace during measurement The measurement will S1q:l v.tien the interface is switched.)

body temperature

As shown in the picture on the left it is the body temperature test interface. Click the body temperature icon to start measuring the current body temperature. After the measurement is successful, the body temperature measurement result will be displayed. The body temperature unit can be switched in the />PP. (The temperature data is fa-reference only)
Note: When performing a body temperature test . the bottom of the watch must be close to the skin , and the body temperature full contact with the skin, otherwise the data will be inaccurate. When the body surface temperature is higher than 37 3 the watch body temperature, will display an orange warning

Music interface

As shown on the left, it is the music control interface after connecting the phone, the watch can control the player of the phone. When the phone is playing music. after clicking in, you can use the watch to contrcl the phone music to play/pause, the previous soog, the next song Operation.

Information Push

After the bracelet is connected to 1he mobile phone, the bracelet receives mobile phone text messages, call WeChat and other three-way instant messaging and prompts.{ You need to tum on the cooespond­ ing prompt switch in “Settings” •> ”Notification Configuration” on the mobile phone APP when the bracelet is connected to the mobile phone.)

Blood Oxygen

As shown in the picture on the left it is the interface for measuring blood oxygen. This content can also be viewed in the mobile phone APP after connecting the bracelet. the same as 1he heart rate measurement method
Note: Please keep still during the measurement Do not press the button to switch the interface during measurement The measurement will stop when the interface is switched.

Sleep interface As shown on the left it is the sleep status interface, which mainly displays 1he total sleep time last night The content can also be viewed in the mobile phone APP after connecting the bracelet No settings are required. After 21 :00 at night if sleep is detected, it will automatically enter sleep mode.

Language Setting Interface

As shown on the left is the language setting interface. Under the language interface, other national languages can be set. or it can be set to follow the phone system language. Supported languages: Chinese {Simplified and Tradi tional), Japanese, English, French, German, Italian, Spanish, Russian, Portuguese, Polish, Malaysian Thai Indonesian, Vietnamese, Hebrew, Turkish, Korean

Stopwatch interface

Countdown interface

Motion Interface

/l.s shown in the figure below, it is the sport mode interface. Tap to enter the exercise item interface. You can choose walking, running, mountain climbing, swimming, yoga, elliptical machine, football, badminton, basketball cycling, table tennis, eleven items movement

Shenzhen Nakinmi Smart Technology MV60 Pro Smart Health
Watch-26

After-sale

When purchasing this product, if it is a quality problem within the warranty period, our company implements a three-guarantee policy. If you need to replace the accessories for human damage, you need to charge the corresponding accessories.

Specifications

  • Size: 2584713.3mm
  • Usage time: 7-1 Oday
  • Screen size: l .28 inch full circle screen
  • Resolution: 240*24-0dpi
  • Waterproof level: IP67
  • Bluetooth: IS2806
  • Battery: l 80mAh
  • Compatibility: IOS8.4+Android4.4

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals