knog 1300 Front Bike Light User Guide

knog 1300 Front Bike Light User Guide

WHAT’S IN THE PACK

OPERATION

NOTE THE BLINDER 1300 IS PACKAGED IN DEMO-MODE. TO ENABLE FULL FUNCTION OF THE LIGHT, CONNECT IT TO A USB-C CHARGER.

LONG PRESS (2 SECS) – ON/OFF
QUICK PRESS – CHANGE MODE
DOUBLE PRESS – TOGGLE BETWEEN STEADY & FLASH MODES
QUICK PRESS WHEN OFF TO CHECK BATTERY STATUS

CHARGING

TO ACHIEVE OPTIMAL OPERATING LIFE FROM YOUR BATTERY, IT IS BEST TO CHARGE WITHIN A TEMPERATURE RANGE OF 15°C-30°C (59°F-86°F)

IF THE TEMPERATURE DROPS BELOW O°C OR ABOVE 45°C (BELOW 32°F OR ABOVE 113°F) CHARGING WILL BE SUSPENDED TO PROTECT THE BATTERY.

LIFT THE CHARGING-PORT HATCH.

INSERT USB TYPE-C CHARGING CABLE.

ONCE THE CHARGE CABLE IS INSERTED, THE POWER BUTTON WILL GLOW AMBER INDICATING THE BLINDER IS NOW IN CHARGING MODE.

ONCE FULLY CHARGED, THE POWER BUTTON WILL GLOW GREEN. AFTER 1 MINUTE THE GREEN LIGHT WILL TURN OFF.

BATTERY STATUS

A QUICK PRESS OF THE POWER BUTTON WHEN THE LIGHT IS SWITCHED OFF WILL INDICATE THE BATTERY STATUS.

WHEN THE POWER BUTTON LIGHT IS FLASHING RED, THE LIGHT’S OUTPUT.

MOUNTING

BAR MOUNT

SELECT THE CORRESPONDING HOLE TO SUIT YOUR BAR DIAMETER.

FIRMLY HOLD THE MOUNT IN PLACE & STRETCH THE STRAP DOWNWAR.

THEN PULL THE STRAP AROUND THE BAR & SECURE ON THE HOOK.

COMPLETE MOUNTING BY PULLING UP ON THE TAB WHILE APPLYING DOWNWARD PRESSURE TO CLICK THE LIGHT INTO POSITION.

MAKE SURE THE LIGHT IS SECURE BEFORE RIDING!

TO REMOVE, PRESS DOWN ON TAB & GENTLY PULL LIGHT AWAY FROM CRADLE.

**UNDER MOUNT

**

PLACE THE LIGHT INSIDE THE MOUNT IN THE UN-LOCKED POSTION.

LOCK THE UNDER-MOUNT.

MAKE SURE THE UNDER-MOUNT IS LOCKED BEFORE RIDING.

DO NOT RIDE WITH THE UNDER-MOUNT UNLOCKED!

REFER TO YOUR GO-PRO OR COMPUTER MOUNT INSTRUCTIONS TO COMPLETE BLINDER UNDER- MOUNT INSTALLATION.

MODES & RUNTIMES

DESIGNED BY KNOG MELBOURNE, AUSTRALIA
2 YEAR WARRANTY
KNOG.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>