BlauxBuds User Manual: Learn How to Use Your True Wireless Earbuds

The BlauxBuds True Wireless Earbuds User Manual provides detailed instructions on how to use your new earbuds. With Bluetooth® 5.1 technology, these earbuds offer seamless connectivity to your phone or other compatible devices. You can enjoy hours of music, hands-free calls, and crystal-clear audio thanks to the advanced audio engineering of the BlauxBuds. This user manual provides all the necessary information you need to know before using your earbuds, including the product specifications, quick use guide, one-button control, charging guide, and troubleshooting tips. The manual also includes information on how to get in touch with the customer service team in case you have any questions or concerns about your BlauxBuds. Additionally, the manual provides important information on how to dispose of the product at the end of its service life and how to comply with FCC rules and regulations. By following the instructions in this user manual, you can ensure that you get the most out of your BlauxBuds and enjoy a hassle-free listening experience.

TRUE WIRELESS BLUETOOTH EARBUDS

BlauxBuds USER MANUAL

THANK YOU

For choosing BlauxBuds! Listen to music and take calls without getting tied up in a bunch of wires. BlauxBuds are true wireless earbuds that use Bluetooth® 5.1 to seamlessly connect with your phone or other compatible devices. Enjoy hours of music, hands-free calls, and crystal-clear audio thanks to BlauxBuds’ advanced audio engineering. Kindly read this user manual before using your new wireless earbuds. Make sure to keep this document for future reference.

BLUETOOTH ® 5.1

PRODUCT SPECIFICATIONS

Wireless Stereo Earbuds

• Bluetooth Connection Name: BlauxBuds
• Bluetooth Version: 5.1
• Size: 2.9 x 1.4 x 1.3 inches (75.3 x 35.3 x 33.5 mm)
• Weight: 44.5g (Earbuds and charging case)
• Earbuds Input: DC 3.7V 40mA
• Charging Case: Input: DC 5V 300mA Output: DC 5V 100mA
• Working Time: 4.5 hours
• Earbuds Battery Capacity: 40mAh
• Charging Case Battery Capacity: 300 mAh
• Sensitivity: 101.8±3Db
• Frequency Response Range: 20 – 20,000 Hz
• Impedance: 32 Q
• Water Resistance Rating: IPX4

QUICK USE GUIDE

1. Take the BlauxBuds out of the charging case. The indicators will blink Red and Blue until your BlauxBuds are paired with your device.
2. To pair, open your phone’s Bluetooth settings. Look for “BlauxBuds” and click to pair your phone with the earbuds. Once they are connected, the lights will blink blue a few times then stop blinking. Note: If the earbuds do not connect with your phone within 1 minute, they will power off. To fix this, put your earbuds back in their case to restart them.
3. Once you’re done listening, put the BlauxBuds back in the charging case. They will automatically turn off and start charging.
4. When you want to use your BlauxBuds again, simply take them out of the case. They will automatically turn on and connect with your phone.

ONE-BUTTON CONTROL

CHARGING GUIDE

Earbuds Steady red light – Charging No light – Fully charged Charging Time: About 1.5 hours Note: Flashing red lights indicate a low battery Charging Case Blinking white lights – Charging Steady white lights – Fully charged Charging Time: About 2 hours REMAINING POWER

WHAT’S INCLUDED

Earbuds Charging Case

TROUBLESHOOTING

My phone cannot find the BlauxBuds.

• Turn off your phone’s Bluetooth® connection. Turn it back on, then search for the BlauxBuds again. The earbuds were interrupted or disconnected during a call or while listening to music. This may be due to:
• Low battery
• The distance between the phone and BlauxBuds exceeds 33 feet (10 meters).
• There are signal-blocking objects between the phone and the BlauxBuds Only one earbud is working.
• You may have activated single earphone mode. To fix this, while your BlauxBuds are powered on, double click the right earbud’s function button to go into pairing mode. Then pair your BlauxBuds to your device again.
• One earphone may have run out of battery. To fix this, put your earphones back in the case to charge them up before listening again.

GET IN TOUCH

Thank you for choosing BlauxBuds! Have questions about our products? You can contact our helpful customer service team by going to https://support.blakixstore.com/hden-us or by scanning the QR code on the right. We’re always happy to help!

https://support.blauxstore.com/hc/en-us

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. At the end of its service life, this product may not be disposed of in the normal household waste, but rather must be disposed of at a collection point for recycling electrical and electronic devices. The materials are recyclable according to their labeling. You make an important contribution to protecting our environment by reusing, recycling, or utilizing old devices in other ways. Please ask the municipal administration where the appropriate disposal facility is located. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. End-user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SPECIFICATION

Wireless Stereo Earbuds|
---|---
Bluetooth Connection Name| BlauxBuds
Bluetooth Version| 5.1
Size| 2.9 x 1.4 x 1.3 inches (75.3 x 35.3 x 33.5 mm)
Weight| 44.5g (Earbuds and charging case)
Earbuds Input| DC 3.7V 40mA
Charging Case Input| DC 5V 300mA
Charging Case Output| DC 5V 100mA
Working Time| 4.5 hours
Earbuds Battery Capacity| 40mAh
Charging Case Battery Capacity| 300mAh
Sensitivity| 101.8±3Db
Frequency Response Range| 20 – 20,000 Hz
Impedance| 32 Q
Water Resistance Rating| IPX4

FAQS

What should I do if my phone cannot find the BlauxBuds?

Turn off your phone’s Bluetooth connection, turn it back on, and search for the BlauxBuds again.

How do I pair my BlauxBuds with my phone?

To pair your BlauxBuds with your phone, take them out of the charging case, turn on Bluetooth on your phone, and look for “BlauxBuds” in the list of available devices. Click on it to connect.

What is the water resistance rating of BlauxBuds?

BlauxBuds have a water resistance rating of IPX4.

How long does the battery last on BlauxBuds?

BlauxBuds can work for up to 4.5 hours on a single charge.

How long does it take to charge the earbuds?

It takes about 1.5 hours to fully charge the earbuds.

What is the Bluetooth version of BlauxBuds?

BlauxBuds use Bluetooth® 5.1 technology for seamless connectivity with your phone or other compatible devices.

What are the FCC rules and regulations that apply to BlauxBuds?

BlauxBuds comply with Part 15 of the FCC Rules. End-users must follow specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

How should I dispose of my BlauxBuds at the end of their service life?

Do not dispose of your BlauxBuds in normal household waste. Instead, take them to a collection point for recycling electrical and electronic devices.

How can I get in touch with customer service?

You can contact customer service by going to https://support.blauxstore.com/hc/en-us or by scanning the QR code provided in the user manual.

What should I do if only one earbud is working?

You may have activated single earphone mode. To fix this, double-click the right earbud’s function button to go into pairing mode and then pair your BlauxBuds to your device again.

How do I turn on/off my BlauxBuds?

To turn on your BlauxBuds, long press the function button for 5 seconds. To turn them off, put them back in the charging case.

FCCID: 2AX4F-30691
IC:27073-30691
HVIN: 30691

Documents / Resources

| BLAUX 30691 BlauxBuds True Wireless Earbuds [pdf] User Manual
30691, 2AX4F-30691, 2AX4F30691, 30691 BlauxBuds True Wireless Earbuds, BlauxBuds True Wireless Earbuds, True Wireless Earbuds, Earbuds
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>