BLAUX 30773 Motion Sensor Lights User Manual
- October 30, 2023
- BLAUX
Table of Contents
BLAUX 30773 Motion Sensor Lights
Blaux Rechargeable Motion Sensor Lights
The Blaux Rechargeable Motion Sensor Lights are designed to provide efficient
lighting in entryways, rooms, and exterior areas.
These lights use built-in detectors and LEDs to illuminate the surroundings.
The product is easy to use and can run up to 11 hours on a single charge.
Product Usage Instructions
- Charge the Lights: To charge the Blaux Motion Sensor Lights, use the included Micro USB cable. When plugged in, a red LED will glow. The lights will be able to run for up to 11 hours on a single charge. When the lights are done charging, the LED will turn green.
- Attach Magnetic Tape: Attach the magnetic tape onto the desired surface (e.g., near a doorway, inside your garage, along your exterior walls).
- Attach the Lights: Attach the Blaux Motion Sensor Lights to the magnetic tape.
- Automatic Turn On: The lights will automatically turn on when movement is detected within a 10-26 foot range. They will switch off 15 seconds after you leave the room or when no movement is detected.
- Dark Environment: Note that the lights will only work if the area is dark. If there is another light source, the Blaux Motion Sensor Lights will not switch on, even if movement is detected.
- Avoid Damp Conditions: Do NOT expose your Blaux Motion Sensor Lights to overly damp conditions (i.e., bathrooms) or immerse in water.
Thank you for choosing Blaux! For any further queries or assistance, you can contact our helpful customer service team by going to support.blauxstore.com or by scanning the QR code provided in the user manual.
Thank you for choosing the Blaux
Rechargeable Motion Sensor Lights!
Now, you and your loved ones can easily navigate your home and conserve
energy.
Kindly read this user manual carefully before using your new Motion Sensor
Lights. Make sure to keep this document for future reference.
HOW IT WORKS
The Blaux Rechargeable Motion Sensor Lights use built-in detectors and LEDs to effectively illuminate entryways, rooms, and even exterior areas. These lights can run for up to 11 hours on a single charge, giving you maximum efficiency.
Product Parameter
- Detection Distance: 10 to 26 feet (3 to 8 meters)
- Detection Angle: 120°
- Number of LED Beads: 10
- LED Life: More than 80,000 hours
- LED Brightness: 1800 – 2000 MCD/piece
- Luminous Angle: 120°
- LED Color: Warm white
- Standby Current: 39 mA
- Operating Current: 70 mA
- Power Supply: 350 mAh lithium battery
- Auto Shutoff Time: 15 seconds
- Product Size: 188 x 30 x 15 mm
- Storage Temperature: 14 – 104 °F (–10 – 40 °C)
Quick Use Guide
- To charge your Motion Sensor Lights, simply use the included Micro USB cable. Your lights will be able to run for up to 11 hours on a single charge.
- Attach the magnetic tape onto the desired surface (e.g. near a doorway, inside your garage, along your exterior walls). Then, attach the Blaux Motion Sensor Lights to the magnetic tape.
- The lights will automatically turn on when movement is detected within a 10-26 foot range. They will switch off 15 seconds after you leave the room or when no movement is detected.
Note: The lights will only work if the area is dark. If there is another light source, the Blaux Motion Sensor Lights will not switch on, even if movement is detected.
Package Includes
- 1 x Blaux Motion Sensor Light 1x Micro USB Cable
- 1x Magnetic sticker
- 1 x User Manual
Safety Reminders
- When plugged in, a red LED will glow. When your lights are done charging, the LED will turn green.
- Do NOT expose the lights to extreme temperatures (below 14 °F or above 104 °F).
- Do NOT expose your Blaux Motion Sensor Lights to overly damp conditions (ie. bathrooms) or immerse in water.
Get in Touch
Thank you for choosing Blaux!
Have questions about our products? You can contact our helpful customer
service team by going to support.blauxstore.com or by scanning the QR code
below. We’re always happy to help!