BLAUX 30888 Real Wireless Stereo BLXBuds Earbuds User Manual
- June 5, 2024
- BLAUX
Table of Contents
BLAUX 30888 Real Wireless Stereo BLXBuds Earbuds
Real wireless stereo headphones
We appreciate you for purchasing the True Wireless Stereo Earbuds, the following instructions will guide you to use it easily.
Wearing
Put the earbuds in your ears, rotate and adjust it to the best angle, be sure to wear comfortably and secure fit.
Accessories
- User Manual
- Charging Cable
- Ear Caps
- Qualified Certificate
- Diagram
Earbuds：
-
Sound hole
-
Smart area
-
LED indicator
Charging box：
-
Type-C charging port
-
LED digital display
-
LED indicator
Auto On/ Off
- When open the box and take out the earbuds, it will automatically power on.
- When putted it in box, the earbuds will automatically power off.
Manually On/Off
- Long press the earbuds touch areas about 3 seconds to power on the earbuds.
- Long press the earbuds touch areas about 5 seconds to power off the earbuds.
Pairing
How to Pair
Taking the earbuds out of the charging box, the left and right earbud will
automatically connect and enter the Bluetooth search pairing state, select and
connect “ BLXbuds”devices in the Bluetooth list of smart devices.
Auto pairing
- Opening the box and taking out the earbuds, it will automatically connect back to the last Bluetooth device.
- When the earbuds are disconnected from the device beyond the effective distance, them will automatically reconnect after returning to the effective distance within 1 minute.
Operation
Left：
- Play/Pause/Answer （Hang up x2）
- Voice assistant (Siri) x3
- Long press 1.5s: Previous song
- Long press 2s: Reject
Right：
- Play/Pause/Answer （Hang up x2）
- Voice assistant(Siri) x3
- Long press 1.5s:Next song
- Long press 2s: Reject
Charging
Charging the box：
- The charging box red light’s flashing charging
- The charging box red light’s on fully char ged
- The charging box is fully charged about 1.1 hours
Charging the earbuds：
- The earbuds red light’s on charging
- The earbuds blue light’s on about 15 seconds then turns off fully charged
- The earbuds are fully charged about 1.2 hours
Warning
- Do not listen for a long time at high volume level,preventing injury to hearing.
- For traffic safety, do not use the earbuds while driving or cycling.
- The earbuds only can be charged with 5V charger, using a fast charger that more than 5V or charger with 5V more than 1.5A will cause overheat or fire.
- Do not expose the earbuds to high temperature or expose it to sunlight for a long time.
- The storage temperature of the earbuds is-20°c to 40°c.
- Please fully charge the earbuds before long-term placement, and ensure to charged every 3 months
Please tear off the insulation paste before using the earbuds, and put it in the charging box for activation and sure be fully charged.
Service
- Please contact us if any problems, we will provide you a professional service.
- Warranty is only covered by the first year of purchase. Enjoying free repair service if the failure is caused by product quality.
- Please provide the product warranty card and the corresponding order number so that we can better solve the problem for you.
Product Parameters
- Product name: BLXBuds
- Model: 30888
- BT Version: V5.1
- Input Voltage: DC5V
- Capacity Battery: 35*2mAh/250mAh
- BT Frequency Range: 2.402-2.480GHz
- Audio Frequency: 20Hz-20KHz
- Drivers Size: Φ10mm
- Transmission Range: 10m
- Sensitivity: 103dB±3dB
- Play Time: About 7 hours
- Charging Time: About 1.2 hours
FCC& ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada
licence-exempt RSS standard(s).Operation is subject to the following two
conditions:
(1)this device may not cause harmful interference, and (2)this device must
accept any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme à la partie 15 des règles de la FCC et aux normes
RSS exemptées de licence d’Industrie Canada. Le fonctionnement est soumis aux
deux
conditions suivantes :(1)cet appareil ne doit pas causer d’interférences
nuisibles, et (2)cet appareil doit accepter toute interférence reçue, y
compris les interferences pouvant entraîner un fonctionnement indés
Changes or modifications to this unit not expressly approved by the party
responsible forcompliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonableprotection against harmful interference in a
residential installation. This equipment generates,uses and can radiate radio
frequency energy and, if not installed and used in accordance withthe
instructions, may cause harmful interference to radio communications. However,
there is noguarantee that interference will not occur in a particular
installation. If this equipment doescause harmful interference to radio or
television reception, which can be determined by turningthe equipment off and
on, the user is encouraged to try to correct the interference by one ormore of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Radiation Exposure Statement for camera
This equipment should be installed and operated with minimum distance 0cm
between the radiator & your body.