BLAUX 30335 Portable Bidet IM V04 Outline User Manual
- June 5, 2024
- BLAUX
Table of Contents
BLAUX 30335 Portable Bidet IM V04 Outline
WARNING
The detachable water reservoir may be in a locked position upon arrival. Please follow the instructions below to unlock and detach the bidet from the water reservoir before use .
- Hold the water reservoir firmly and rotate the bidet main body counter-clockwise to unlock.
- Pull the bidet main body up from the water reservoir to remove it.
Product Introduction
Thank you for purchasing the Blaux Portable Bidet The modern, rechargeable,
and portable design is compact and powerful. The 5.75 fl oz/ 170 ml reseilioir
can be detached as well for even more compact storage. It fits nicely in the
hand for easy, comfortable use.
Features
- Compact design
- 5.75 fl oz/ 170 ml Water reservoir
- Lightweight (only B.3 oz/ 235 g)
- Water-resistant (IPX6 Rated)
- 2 Spray modes (Strong / Soft)
- Comfortable, cleansing spray
- Up to 30 days of battery standby
- Magnetic charging connection
- 3 ID Rings for personalization
What’s Included Blaux Portable Bidet
Applications
How To Use
- Turn and pull the bidet body out from the water reservoir.
- Fill the water reservoir with clean Water (max. 5.75 fl ozi)70 ml).
- Secure the grooved end and align the notch, rotate to lock the water reservoir by matching the notches.
- Pull the notch of the cleaning wand base to deploy.
- Press either r the soft mode or strong mode button pressure. for desired
- After use, remove the reservoir and drain the excess water.
- Have the bidet wand facing down and press the strong mode button to expel excess water from the device.
- Clean the idet wand body and reservoir. Insert the bidet body into the reservoir by rotating to lo4k.
- The bidet will automatically shut off after 35 seconds for strong mode and 45 seconds for soft mode.
Recharging Your Blaux Portable Bid
Charge your Blaux Portable Bidet with the supplied USB charging cable before use. When the battery is low, the LED indicator near the buttons ‘fill be flashing RED and the spray pressure will decrease and eventually stop. Charge the bidet with the supplied USB charging cable to avoid battery damage, the magnetic connector can only be placed in one direction.
- Connect the 5V USB cable to a power source.
- Connect the magnetic. plug to the bideap1 to start charging. The magnetic connector can only be placed in one direction. The LED indicator near the buttons will t,e lit solid RED when charging.
- When the battery is full, the LED indicator will shut off automatically. Unplug the charging cable.
Battery Status LED Indication
| Low | Flashing red when on |
|---|---|
| Charging | Solid red |
| Fully charged | Tums off automatically |
Changing ID Rings
- The ID ring is connected to the base of the water reservoir. The rings are changeable to suit your preference and to differentiate from others.
Changing Bidet Nozzle Orientation
The bidet nozzle orientation can be changed depending on your handling preference. To change the nozzle, hold the nozzle firmly and PII from the wand. The nozzle is tightly fitted and require some force to undo, this is normal for water sealing purpose. Please inspect the water seal O-ring on the wand before inserting the nozzle. Orientate the nozzle {front or backward facing), and push in to fasten.
Specifications
Stored Dimension| : 2″ x 2″ x 7″ / 50 x
50 x 170 mm
---|---
Fully Extended Dimension| 1 ‘ 2″ x 2″ x 16″/
50x 50x 405mm
Product Weight| i 8. 3 oz , 235g
Reservoir Volume| : 5.75fl oz/170ml
Run Time (Soft Mode)| , Around 100cycles
Run Time (Strong Mode)| i Around 80cycles
Water Resistant|
Working Output Current| : < 420mA
Input Power| ! DC 5V/1000mA
Power Source| ! 4.2 V /800mA
Standby nme| : up **to 30days
Battery Charging nme| : Aroun d 2hours**
‘
Note
- This bidet is intended for external use only.
- Do not immerse the bidet into water.
- Avoid filling with water above 104°F / 40°C.
- Clean the bidet body, cleaning wand, and wate reservoir on a regular basis to avoid harmful bacteria growth.
- For proper cleansing, use the bidet by spraying the target area in a circular motion.
Contact Info
- Thank you for purchasing Blaux Portable Bidet 1
- If you have any inquiries, please visit: https://support.blauxstore.com/
- Our customer support team is happy to help!
At the end of its service life, this product may not be disposed of in the normal household waste, but rather must be disposed of at a collection point for recycling electrical and electronic devices. The materials are recyclable according to their labeling. You make an important contribution to protecting our environment by reusing, recycling, or utilizing old devices in other ways. Please ask the municipal administration where the appropriate disposal facility is located.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>