THOMSON QY-K600 Karaoke Player with Two Microphones User Manual

June 6, 2024
THOMSON

KARAOKE PLAYER
WITH TWO MICROPHONES
User Manual

Preface

Dear valued user: Welcome to join the big family of Train! Thank you very much for purchasing our products.
In order to use this player efficiently, please read this Manual carefully to master the connection method and key operation instructions of this system before use. We have
made some explorations in design, manufacturing process, humanized operation, etc.
to meet your demands.
Please keep this Manual properly for future reference.
Please unpack, carefully check the following accessories, and put them together to avoid missing them.

List of Accessories

speaker  X 1  User’s Manua X 1  Type-Charge cable X 1
Wireless microphone X 2 Remote controller X 1

3. Product introduction

  1. Advanced Bluetooth function, enabling pairing and connecting to any devices with
    Bluetooth function (applicable to products with Bluetooth function).

  2. Designed with large-capacity batteries, easy to carry and use and longer duration.

  3. Support high-quality MP3 music files.

  4. Support Karaoke function.

  5. High-power horn and 3D digital audio technology contribute to the remarkable tone quality.

  6. Compatible with external audio devices, such as IPAD, IPOD, mobile phone, computer, MP3, and MP4.

Notes

First of all, thank you for using our digital audio products! Please read this Manual before using this product to ensure correct operation. To provide better service, the contents of this Manual are subject to change due to changes in product performance and functions without prior notice. Please do not use this product in places that are too cold, too  hot, too dusty, or too humid, and avoid the following situations to ensure better performance:

  1. The wet or underwater environment
  2. Heater or high-temperature working environment
  3. Direct exposure to sunshine
  4. Easy to fall off
  5. Do not disassemble the audio system, otherwise, the warranty will be void.
    WARNING 1. Please pay attention to keep avoid from water and avoid water drop, splashing, etc. Do not place containers with water, such as a vase on the top of the equipment to prevent accidents. 2. In order to avoid fire, electric shock, and other accidents, please check whether the charging voltage is completely consistent with the specified requirements.

5. Panel introduction

Introduction to buttons and hole sites: A total of 8 buttons and hole sites are defined as follows:

  1. /M: Long press to start up/shut down; short press to switch mode;
  2.  : Short press to play or suspend the music.
  3. /- : Long press to reduce the volume; short press to shift to the previous song
  4. /+ : Long press to increase the volume; short press to shift to the next song.
5. OUT: Audio output  6. U6. USB: USB play
7. DC IN: Type C 5V/2A charging 8. AUX: Audio input (built-in reset button)

Remote-control unit

1. Power off 9. Play / suspend
2. Microphone volume + 10. Next song
3. Volume + 11. Volume12.
4. Previous song 12. Sound
5. Bluetooth disconnected /loopback connection 13. Menu/ Volume mode switch
6. Microphone reverberation + 14. Microphone reverberation
7. Mute 15. Reset
8. Microphone volume – 16. Mode switch

Note: Press button 13 “Volume mode switch” to switch among three modes, i.e. tE/bA/UO. It can be used in conjunction with the “Volume +/-” key to adjust the volume size. It defaults as UO.

Operation instructions

Bluetooth mode

  1. Short press /M key to switch to Bluetooth mode, which will enter the default Bluetooth mode and wait for pairing.
  2. Turn on the Bluetooth function on the device, and the device will start searching the Bluetooth device.
  3. Select “K600” from the list of found devices.
  4. Enter the password “0000” as requested and press OK.
  5. After successful pairing with the device, the indicator light will be constantly on.
    Note: Bluetooth playback is controlled by the buttons on your device and the remote control.
    Coaxial output mode
    After start-up, use a 3.5mm audio cable to connect other audio devices to the “OUT” jack of the speaker, and then short press the speaker /M ” button or the “MODE” button on the remote control unit to switch to the audio output mode. At this time, the sound is played from the speaker as an audio source.
    Audio input mode
    After startup, use a 3.5mm audio cable to connect external audio sources to the “AUX” jack of the speaker, and then short press the speaker /M” button or the “MODE” button on the remote control unit to switch to the audio input mode. After that, you can play music from an external audio source such as MP3/CD (please adjust the volume of the external audio source to moderate and play).

U disk play mode

  1. In any play state, insert the U disk stored with MP3 songs into the USB interface. The speaker will automatically identify and skip to the U disk play mode. The songs will be played in copy order.
  2. Short press the “ ” button to play and suspend the music.
  3. Short press to switch to the next song; long press to increase the volume.
  4. Short press to switch to the previous song; long press to decrease the volume.

Karaoke function
Turn on the microphone switch in any mode to activate the Karaoke function.

Equipment compatibility

This machine theoretically supports all mobile phones with Bluetooth function and any related devices to connect Bluetooth and play music.

Main technical parameters

Product QY-K600
Output power 15W*2
Speaker frequency 45Hz-20KHz
Bluetooth version 5.0. A2DP. AVRCP
Bluetooth range Within 10 meters
Bare machine weight About 830g
Dimensions speaker: 25010563mm

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that may cause undesired operation.
    The device has been evaluated to meet general  RF  exposure requirements.  The device  can  be
    used in portable exposure conditions without restriction.

Simple troubleshooting solutions

Trouble Solutions
Low volume or distortion 1. Check the audio volume and adjust it to the

right size
2. Battery low, need to be charged
Bluetooth indicator light is not on| 1. Battery low. Please charge and try again. 2. Restart
Music discontinuity| 1.  There is an obstacle between the mobile device and the Bluetooth device. Please remove the obstacle.
2.  Beyond the effective connection distance.
Pairing failure| 1. Check if the phone is in the pairing state.
2. The speaker has been successfully paired with other equipment. Please disconnect the pairing with other equipment first.
3. Delete the original device name on your phone and re-pair.

Charging instructions

When the speaker prompts low battery, please charge it in time. It can be connected to the 5V/2A charging device with the attached charging cable, and it can be fully charged in about 4 hours. When the LED light of the speaker flashes, it means that it is charging. After it is fully charged, the LED light will be always on, indicating the battery is charged.   Manufacturer: Shenzhen Qiuyu Electronic Co., Ltd.
Address: 3F, E Building, Hongzhuyongqi Industrial Park, Lezhujiao village, Xixiang Town,
Baoan District, Shenzhen After-sale service hotline: 0755-86323159
After-sale service mailbox: support-us@u-rain.com
Website: http://www.u-rain.com/
V1.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals