Guangdong Anjou Robot Technology V100 Robot Vacuum Cleaner Instruction Manual
- June 6, 2024
- Guangdong Anjou Robot Technology
Table of Contents
Guangdong Anjou Robot Technology V100 Robot Vacuum Cleaner
Product maintenance
Dust box and filter cleaning
It is recommended to clean the dust box and filter in time after each use of
the machine
A. Pull out the dust box by pressing the button on the back of the
machine
B. Press and hold the button on the dust box to open the dust box and
take out the garbage.
C. Take out the filter filter cotton inside the dust box, and clean it
with a brush or cloth.
Remark:
- The life of the filter is about 24 months. It is recommended to wash it with water every 15-30 days.
- After washing, it is recommended to dry in a cool and ventilated place. Do not squeeze. Do not expose to the sun.
Main brush assembling and cleaning
A. Take out the roller brush cover of the dust suction port with the
bottom of the machine facing upwards, pull up the roller brush on the right
side, and then use the cleaner to clean the entangled hair.
B. After the roller brush is rinsed and dried, align the ports one by one
and install them.
Side brush cleaning
A. Use a brush cleaning tool to cut off the entangled debris.
B. Use a clean cloth to clean the side brush.
C. When the side brush is in use, if the side brush is deformed, please
remove the side brush and restore it to its original shape with boiling water.
D. When the side brush cannot be used, please remove the damaged side
brush and replace it in time
Universal wheel cleaning
Universal wheel cleaning Turn the device over, pull out the universal wheel
upwards, reinstall it after cleaning, and press it firmly.
Ensor and charging electrode cleaning
Use a cleaning tool or a rag to clean the device ground sensor, charging pole
piece, suction channel opening and charging contacts on the charging stand.
Note: Do not directly touch the sensor with liquids such as water and
thinner.
Problem type
No | Fault conditions | Possible reason | Solution |
---|---|---|---|
1 | Cannot connect to the APP | The router username and password are incorrect. |
Configure the router network andmake sure that the router “Username” and
“Password” are entered correctly.
The device is not within the network signal coverage of the router .| Ensure
that the device is within the network signal coverage of the router.
Whether the device is in a state to beconfigured.| The network can only be
configured when the host isinthe network configuration state. After the device
is normally powered on, press and hold the fixed-point button andthe recharge
button. Then you will hear “Network configuration.please wait for the the
network configuration result in the APP interface,” it means The device enters
the network configuration mode.
Without 2.4Gnet work.| Please change to 2.4G network
2| Can’t install APP| The phone operating system version is too low.| Mobile
phones with 1O S9.0 and above, Andro idS.0 and above can download and use the
App
3| Can not be charged| The main unit isin poor contact with the charging pole
piece of the charging station.| Make sure that theunit and the charging pole
piece of the charging station are fully connected. And the indicator light on
the charging station is Always on. Check whether the charging pole pieces of
the main unit and charging stand are dirty.
The charging dock is not connected to power.| Connect the charging station
power supply in time.
4| Difficult to recharge| The charging stand is not placed correctly.|
Please place the charging station on a level ground.againstthe wall. And
remove 1 meter on both sides of the charging station .All obstacles of2
meters,covering the bottom of the refleclive objects around the charging
station 10cm.
He charging station is powered off or moved off.| Please check if the charging
base is connected to a power source. Do not move the charging stand position
artificially.
Theunit is stuck by ground obstacles (such as wires, carpet edges, electric
fan base, etc.) or the door of the room with the charging stand is closed.
Making it impossible to return to the charging stand.| It is recommended to
clean the ground debris and wires before using the machine to avoid being
entangled when the main machine is working and unable to get out of the trap
andrecharge.
Pause for more than 60 minutes or move more than1 meter midway.| Please avoid
suspension and moving as much as possible. To ensure the smooth operation of
the machine . Please letthe machine complete the cleaning independently.The
pause time should not exceed 60 minutes as much as possible , and the moving
distance should not exceed 1 meter
The unit does not start cleaning from the charging stand.| It is recommended
to let the unit start cleaning from the charging station.
5| When the unit is working, there arerandom deviations of the route, repeated
cleaning and the community Domain missed scanning, etc.| Wires, slippers and
other objects placed on the ground affect the normal operation of the host.|
Please minimize the placement of scattered items on the ground. It is
recommended to clean up the ground debris before using the machine. If there
is a missing scan , the machine will make up for the leakage. Please don’t
Forinterference (such as moving the host or
blocking the path of the unit)
Use the unit inlow or nolight conditions| It is recommended to use the machine
under good light or lighting conditions.
Working ona newly waxed andpolished floor, causing flooding fiiction between
the driving wheel and the ground isreduced.| It is recommended to wait for the
floor waxto dry before using it .
It is possible to caused by driving wheel and the ground slip when the robot
vacuum cleaner climbs small steps, thresholds, and door bars, which affects
the host’s overall impact judgment of the working environment of the housing
estate.| It isrecommended to close the door of the area and clean the area
separately. The device dhas the function of self-identifyingsingle rooms. And
it will return to the starting point after cleaning, please rest assured to
use.
Due to different environments unit inindividual regions cannot enter Clean
up.| It is recommended to tidy upthe home environment to ensure that the unit
canenter for cleaning.
6| The unit isin trouble while working.| The unit isentangled or obstructed by
scattered wires, drooping curtain cloth or carpet fringing on the ground.| The
host will try various methods to get out of the trouble. It is recommended to
help manually.
He main unit may be jammed by furniture close to the height of the main unit.|
It is recommended to elevate furniture or artificially block it .
7| When the unit isworking, the running sound is loud.| Side brushes and
roller brushes are entangled, dust box, filter materials are blocked, etc.| It
is recommended to clean the dust box in time after each use of the machine;
regularly clean and maintain side brushes, roller brushes, dust boxes, filter
materials, etc.
Product parameters
If the above methods cannot solve the- problem, you can try the following:
- Turn on the power switch on the side of the unit again and restart the machine.
- If the machine keeps moving backwards, please pat thebumper with your hand and restart it.
- If the machine does not move forward, please check whether the diff sensor is blodced and lean the dust on the sensor oover:
- If the problem cannot be solved by restarting, please return the machi neto the after-sales service center for repair.
Tips:
- The visual sweeper has the function of automatically recognizing the direction of the family, and will walk horizontally and verticallyduring the cleaning process.
- The visual navigation machine has a repositioning function. When using this ftJiction, the machine needs to be paused first and be in the area that has been cleaned, otherwise the positioning will fal.
Complete unit parameters
Name | Parameter |
---|---|
Size | L320W320H76mm |
voltage | 14.8V |
Rated power | 32W |
Battery | 2500mAh or 3000mAh Li-battery |
Charging base Output voltage | 19V |
Charging base output current | 1A |
Remark: Storage temperature 0-45-C
Docking station parameters
Name | Parameters |
---|---|
Size | L 167W143H87mm |
Rated lnput | 19.0V ⎓ 1.0A |
Rated output | 19.0V ⎓ LOA |
Rated power | 50/ 60Hz |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body
Product parameter
Name and content of hazardous substances in the product
Name
| Parts
---|---
Lead (Pb )| Mercury (Hg)| ** Mercury (Cd )| Hexava_lent (C
Chromium r (VI))| P?lybrominated B1phenyls (PBB)| Polybrominated Diphenyl
Ethers (PBDE)
Circuit| ☓| ○| ○**| ○| ○| ○
Metal partsw| ○| ○| ○| ○| ○| ○
Plastic Casing| ○| ○| ○| ○| ○| ○
Battery| ○| ○| ○| ○| ○| ○
Other parts| ○| ○| ○| ○| ○| ○
This form is compiled in accordance with the regulations of SJ/T 11364.
○ Means that the content of the hazardous substance in all homogeneous
materials of the part isbelow the limit requirement specified in GB/T 26572.
☓ Means that the hazardous substance at least in a certain homogeneous
material oft he part exceeds the limit requirement of GB/T 26572.
Warranty Card
Model|
---|---
Warranty| Robot vacuum cleaner Date
Username| User name
Add:
Store| User name|
Add:|
- Please keep your product warranty card properly
- When you need to maintain the product, please fill in the warranty information completely to ensure that the font is neat and clear and easy to identify
- When you enjoy the after-sales service, please show the product warranty card and related purchase information. For on line purchases, please provide the corresponding platform purchase account and enjoy the relevant aftersales service
- You can call our national after-sales service hotline
Warranty period
Product | Time |
---|---|
Completed unit | 1 |
Battery | 6 |
Adapter | 6 |
Consumables side brush, cleaning brush tool | NO |
Warranty principle
- lfthe purchased product has quality problems and has not been damaged or repaired, it can be replaced at the point of purchase within 7 days
- Purchase this product to enjoy free maintenance during the warranty period
- The repair-free warranty is invalid in the following cases. But repair services are provided. And the corresponding accessories and labor costs will be charged when repairing
A. The damage caused by human factors. Including the damage caused by
using in abnormal working environment, not according to the instructions, etc.
B. Due to the user’s private disassembly, self-maintenance, modification,
or non-maintenance of the company’s maintenance department
C. Damage caused by force majeure (such as fire, earthquake, lightning,
etc.)
D. Without product warranty card and valid proof of purchase and unable
to verify user information files
E. Unable to verify the date of purchase
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>