Sariana ST-UCAWPM D480B2 Appel Watch 5W Charger Instruction Manual
- June 6, 2024
- Sariana
Table of Contents
Product Manual
Product Description: ST-UCAWPM
Product Description: D480B2 Appel Watch 5W Charger
Product Pics:
Part Name|
Function Description
---|---
Type-C connector| 5V input;
Apple Watch| Apple Watch charging connector (for D480B2), or connect to other
PD power supply devices;
| Working Environment|
Storage Environment
---|---|---
Temp:| 0°C — 25°C| -40°C — 55°C
Humidity:| Non-condensing State 40% – 90%| Non-condensing State 20% – 95%
Atmosphere Pressure:| 80-106KPa| 80-106KPa
This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>