BestMatic CFR-128226.1 Chest Freezer Instruction Manual
- June 4, 2024
- BestMatic
Table of Contents
CFR-128226.1 Chest Freezer
Instruction Manual
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in order to avoid
injury or damage, and to get the best results from the appliance. Make sure to
keep this manual in a safe place. If you give or transfer this appliance to
someone else make sure to also include this manual.
In case of damage caused by user failing to follow the instructions in this
manual, the warranty will be void. The manufacturer/importer accepts no
liability for damages caused by failure to follow the manual, negligent use or
use not in accordance with the requirements of this manual.
-
Read and save these instructions. Attention: pictures in the instructions are for reference only.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
-
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
WARNING: Do not damage the refrigerant circuit.
-
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
-
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
This appliance is intended to be used in households and similar applications such as
– staff kitchen areas in shops, offices, and other working environments;
– farmhouses and by clients in hotels, motels, and other residential-type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications. -
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
-
WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
-
To avoid contamination of food, please respect the following instructions:
– Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
– Clean regularly surfaces that can come in contact with food and accessible drainage systems.
– Clean water tanks if they have not been used for 48h; flush the water system connected to a water supply if water has not been drawn for 5 days. (Only applicable to water dispenser and water inlet system.)
– Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
– Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
– One-, two- and three-star compartments are not suitable for the freezing of fresh food.
– If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould from developing within the appliance. -
This appliance is not intended to be used as a built-in appliance.
-
Climate class:
– Extended temperate (SN): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 10°C to 32 °C’;
– Temperate(N): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C’;
– Subtropical (ST): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C’;
– Tropical(T): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’. -
Do not use it outdoors. Keep it away from sources of heat, direct sunlight and humidity.
-
When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
-
Children should be supervised to ensure that they do not play with the appliance.
-
It is recommended to check regularly the supply cord for any sign of possible deterioration, and the appliance should not be used if the cable is damaged.
-
Regarding the information pertaining to the installation, handling, use, servicing, replacement of lamp (if applicable), cleaning, and disposal of the appliance, thanks to refer to the below paragraph of the manual.
WARNING: Risk of fire/flammable materials
The coolant circuit of this unit contains the refrigerant Isobutane (R600a), a
natural gas that is flammable and of high environmental compatibility. Make
sure no parts of the coolant circuit get damaged during transport and
installation of the appliance.
If the coolant circuit is damaged:
- avoid any open flames or ignition source;
- disconnect the plug;
- thoroughly air the room in which the appliance is installed and contact an authorized technician.
TRANSPORT AND PACKAGING
Transport the appliance
Transport the appliance, if possible, in a vertical position. Otherwise, it is
absolutely necessary to allow the appliance to stand upright for four hours
before installation ”Prior to first use”. Protect the appliance during
transport against weather influences.
NOTE: The appliance has wheels that facilitate the transport and
installation of the appliance.
Unpacking the appliance
- Remove the appliance from its packaging.
- To prevent hazards, check the appliance for any transport damage.
NOTE: Production residue or dust may have been collected on the appliance. We recommend cleaning the appliance according to the chapter “Cleaning and Maintenance”.
APPLIANCE EQUIPMENT
Appliance overview
1. Temperature control | 3. Alarm light |
---|---|
2. Fast freezing switch | 4. Power light |
INSTALLATION
Conditions for the installation location
-
This appliance is designed to be free-standing only, and should not be recessed or built-in.
-
Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient cooling operation at low power consumption. Enough clearance is necessary.
– Gap to the back approx. 50-70 mm, to the side walls each approx. 100 mm;
– Place the appliance so that the appliance lid can open without being impeded. -
Only install at a location with an ambient temperature suitable for the climate class of the appliance. The climate class can be found under “TECHNICAL SPECIFICATIONS”.
-
Place the appliance on a steady and safe surface.
-
Avoid the installation:
– near heaters, next to a stove, direct sunlight or any other heat sources;
– at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to corrosion under such circumstances;
– near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.), in rooms that may have poor air circulation (e.g. garages).
– Do not expose the appliance to any weather.
Electrical connection
Warning:
- The installation to the mains supply must conform to the local standards and regulations.
- Improper connection may cause to an electric shock!
- Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by an authorized specialist.
- The accessibility of the power plug must be ensured to disconnect the appliance from the power supply in case of emergency.
- Make sure that the voltage supply matches the specifications on the rating label before connecting.
- Connect the mains cable to a properly installed and earthed wall outlet.
- If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations.
STARTUP/OPERATION
Prior to the first use
Caution:
After transport, the appliance should be left standing upright for four hours
before connecting to the power supply. Nonobservance could lead to malfunction
of the cooling system and causes an appliance breakdown.
Clean the appliance interior including all accessory parts. Consider the
instructions which we provide in the chapter “Cleaning and Maintenance”.
Starting the appliance
Connect the appliance to the power supply; the power light illuminates.
Operate the temperature control with the help of the included plastic plate.
See also the section “Settings”.
This appliance requires a standard 220-240V~ 50Hz electrical outlet with
three-prong ground.
The power light indicates that the appliance is properly connected to the
electrical power. It will glow even if the compressor has failed to work and
the compartment is not being cooled.
Settings
Setting [OFF] means that the appliance is in the off state. Turn the
temperature control clockwise, starting from
this setting; the appliance will turn on automatically.
The power levels [1 – 6] regulate the different values of the internal
temperature.
Power level 1: Temperature range approx. -8°C ∼ -12°C
Power level 2 – 3: Temperature range approx. -12°C ∼ -15°C
Power level 4: Temperature range approx. -15°C ∼ -18°C
Power level 5 – 6: Temperature range approx. -18°C ∼ -20°C
[SUPER]: the compressor won’t stop and works all the time.
The temperature will change depending on the ambient temperature, frequency of
lid opening, and the amount of food in the appliance.
During initial operation, turn the temperature control to the highest setting
first, until the appliance has reached the desired operating temperature.
Afterward, it is recommended to turn the control back to a medium setting;
correcting the temperature at a later point would then be easier.
Note:
In general, a medium power level works best for optimized food storage. A high
power level also increases energy consumption.
If the unit is unplugged, has lost power, or is turned off; you must wait for
3 to 5 minutes before restarting the unit.
If you attempt to restart before this time delay, the appliance will not
start. Large amounts of food will lower the cooling efficiency of the
appliance.
If you choose to change the thermostat setting, adjust the temperature control
by one numerical increment at a time. Allow several hours for the temperature
to stabilize between adjustments.
After the power is on, the power light will keep lighting.
If users need to use the fast freezing function, press the fast freezing
switch and the compressor will keep working without interruption.
Once the alarm light illuminates for malfunction, please contact our customer
service or professional maintenance personnel for repair.
Storing food
Note: Recommendation!
To guarantee that the temperature is low enough, you should pre-cool the
appliance a few times before initial loading foods.
Caution: Always pay attention to the storage instructions on the sales
packaging.
The 4-star freezer allows you to store frozen food at a temperature of ≤ -18°C
for several months; to produce ice cubes and to freeze fresh food.
To avoid contamination of food, respect the following instructions:
- Opening the lid for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Regularly clean surfaces that can come in contact with food and the water discharge channel inside the bottom of the appliance.
- Store raw meat and fish in suitable containers in the appliance, so that it is not in contact with or drip onto other food.
- If the appliance is out of use for a long period, follow the instructions under “Switching off”.
Freezing
- Fresh food should be frozen as fast as possible to the core. During freezing operation, the temperature of fresh food should be lowered as fast as possible to keep the formation of ice crystals as little as possible and not damage the food structure.
- If possible, keep a space between the individual items, so that the cold air can circulate.
- The following foods are suitable for freezing: Cakes and pastries, fish and seafood, meat, game, poultry, vegetables, fruit, herbs, eggs without shells, dairy products such as cheese and butter, ready meals, and leftovers such as soups, stews, cooked meat and fish, potato dishes, soufflés, and desserts.
- The following foods are not suitable for freezing: Types of vegetables, which are usually consumed raw, such as lettuce or radishes, eggs in shells, grapes, whole apples, pears and peaches, hard-boiled eggs, yogurt, soured milk, sour cream, and mayonnaise.
Storing frozen food
- Packed frozen merchandise should be stored in a 4-star-freezer compartment in accordance with the manufacturer’s data. Make sure the food items do not defrost after purchase and store them as fast as possible in the freezer.
- It is possible to store food for longer periods of time, up to three months. This period might vary, so observe the storage information on the packaging of the merchandise.
- Make sure that the temperature in the freezer does not rise above -18°C. For this, the unit should be defrosted regularly. A thick frozen layer deteriorates the cooling and increases power consumption.
General safety precautions
- Do not store bottles or cans. These can break when the contents freeze – or even explode if they contain carbonated drinks.
- Once products have been defrosted halfway or completely, they should be consumed as soon as possible and should not be frozen again, except they have been processed to a ready meal.
- Do not eat food that is still frozen. Do not eat ice cream directly from the freezer. The cold can cause injuries in the oral cavity.
- Touching metal parts inside the unit can cause symptoms like burns if the skin is very sensitive.
- Never touch frozen food with moist or wet hands.
Operating noise
Type of sound | Cause |
---|---|
Mumbling | Compressor during its operation |
Liquid sounds | Circulation of the refrigerant |
Click sounds | The temperature control turns the compressor on or off |
Disturbing noises | The vibration of the shelves or cooling coils |
Switching off
To switch off the appliance turn the temperature control to the off state.
If the appliance is out of use for long periods:
- Remove the appliance content.
- Disconnect the appliance from the power supply.
- Defrost and clean the device thoroughly (see ”Cleaning and Maintenance”).
- Leave open the appliance lid to avoid the formation of mold and unpleased odor.
Tips for energy saving
- Disconnect the appliance from the power supply if it isn’t in use.
- Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
- Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
- Adjust the temperature not colder than necessary.
- Allow warm food to cool before placing it in the appliance.
- Open the unit lid only as necessary.
- Defrost the unit regularly.
- The seal of the appliance lid must be completely intact so that the door closes properly.
CLEANING AND MAINTENANCE
Warning:
-
Always disconnect the appliance from the power supply before cleaning and user maintenance.
-
Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage the plastic parts. -
The unit must be dry before restarting the operation.
Caution:
- Do not use a wire brush or other sharp, abrasive items.
- Do not use any acidic or abrasive detergents.
- Do not damage the refrigerant circuit.
Cleaning the appliance including interior
-
Clean the appliance interior, the exterior surfaces, the accessories, and the lid seal regularly with warm
water and mild detergent; or with a clean, damp microfiber cloth without a cleaning agent. -
Remove the appliance content and store it at a cool location.
-
After everything was thoroughly dried, you can restart the operation.
Defrosting Caution:
Never use metal objects (e.g. knives) to remove ice from the evaporator.
Otherwise, it can be damaged.
Note:
To achieve better cooling and to save energy, defrost the appliance regularly
as follows:
- To start the defrosting process, disconnect the appliance from the power supply.
- Remove the appliance content and keep covered at a cool location.
- Open the water discharge channel inside the bottom of the appliance and the water discharge opening at the back of the appliance. Place a drip tray under it to catch the leaking water.
- When the ice has melted, wipe the condensate away and dry the appliance interior.
- Then you may restart the appliance by connecting the plug and turning the temperature control.
TROUBLESHOOTING
Before you contact an authorized specialist
Problem | Cause/Action |
---|---|
The unit is not working properly or at all | • Check the power |
supply/temperature setting / ambient temperature.
• Unblock the ventilation openings, and install the unit freely.
Loading is too warm| • Check the temperature setting/ambient temperature.
• Open the lid only as long as necessary.
Loud noise during operation| • Check the appliance position.
• See the section “Operating noise”.
Water on the unit’s bottom| • Check the temperature setting/water discharge
channel or opening.
Note: If a problem persists after following the steps above, contact your trader or an authorized technician.
TECHNICAL SPECIFICATIONS
Rated voltage: | 220-240V~ |
---|---|
Rated current: | 0.75A |
Rated frequency: | 50Hz |
Climate class: | T |
Refrigerant: | R600a (37g) |
Protection against electrical shock: | I |
Insulation blowing gas: | CYCLOPENTANE |
Climate class:
- Extended temperate (SN): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 10°C to 32 °C’;
- Temperate(N): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C’;
- Subtropical (ST): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C’;
- Tropical(T): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’;
Note: For more data information, please scan the QR code on the energy label.
GUARANTEE AND CUSTOMER SERVICE
Before delivery, our devices are subjected to rigorous quality control. If,
despite all care, the damage has occurred during production or transportation,
please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following
guarantee: For the purchased device we provide 2 years guarantee, commencing
from the day of sale. If you have a defective product, you can directly go
back to the point of purchase.
Defects that arise due to improper handling of the device and malfunctions due
to interventions and repairs by third parties or the fitting of non-original
parts are not covered by this guarantee. Always keep your receipt, without the
receipt you can’t claim any form of warranty. Damage caused by not following
the instruction manual will lead to a void of warranty, if this results in
consequential damages then we will not be liable. Neither can we hold
responsible for material damage or personal injury caused by improper use or
if the instruction manual is not properly executed? Damage to accessories does
not mean free replacement of the whole appliance. In such case please contact
our service department. Broken glass or the breakage of plastic parts is
always subject to a charge. Defects to consumables or parts subjected to
wearing, as well as cleaning, maintenance, or the replacement of said parts
are not covered by the warranty and are to be paid.
The guarantee period of the spare parts is 2 years. If you need replacement,
please contact our customer service.
ENVIRONMENT-FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed of with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe
recycling.
For professional repair and ordering spare parts, please contact our customer
service.
Manufactured by: Emerio B.V.
Zomervaart 1A, 2033 DA Haarlem, The Netherlands
Service Hot Line: +49 3222 1097 615
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>