BestGlory BG-488Z Reclining Office Chair with Footrest Instruction Manual

BestGlory BG-488Z Reclining Office Chair with Footrest Instruction Manual

Accessories List

1. Backrest
   

2. Seat Cushion
   

3. 2 Armrests

4. Split Base Tube
   

5. Central Base Tube
   

6. Central Base Buckle
   

7. Air Rod
   

8. 5 Castors
   

9. Hexagon Wrench

10. 4 Decoration Caps
    

11. Steel Plate

12. 5 Screws 6x20mm (Split Base Tube)

13. 4 Screws 8x40mm (Armrests)

14. 4 Screws 6x25mm (Steel Plate-above)

15. 4 Screws 8×25mm (Steel Plate-below)

Notice [if any question,contact [email protected]]

1. Do not stand in this chair or use the chair in a step ladder use it as char only. This chair designed for one person to use at a time.
2. Do not use this chair unless all bolts, screws and knobs are firmly secured
3. Check all bolts, screws and knobs every days. Tighten if any are loose.
4. Failure to follow these instructions may result in serious injury or death of yourself and people around you.
5. Some of the parts are heavy andi or have sharp edge, please install it carefully to evord hurting you and people around you.

Instructions for Use

Upward Adjustment

Downward Adjustment

Backrest Adjustment

With Foot Cushion

Thanks for purchasing our products. Please read this manual before assembly And please assemble in order. After the assembly, keep the instruction properly Make sure all the parts are included (15 kinds in total.

Assembly Instruction

Please assemble in a wide and flat place

Step 1

Take out Split Base Tube (4) and Central Base Tube (5). Insert Split Base Tube (4) into Central Tube (5) as shove. You can see there are screw holes. Align with the holes, tighten 5 Screws 6x20mm(12) with Hexagon Wrench (9) to fix 5 Split Base Tube (5) to Central Base Tube (4),

Step 2

Take out Castors (8). Imert Castors (8) into part of Step 1 as shown. There are 5 Castors (8) need to be inserted. Take out Air Rod (7) Put Air Rod (7) through Central Base Buckle (6) into the hole of Central Base Tube (5) as shown.
Caution : Confirmatory must be inserted deeply, then could fall down.

Step 3

Pick up the Air Rod (7) and the Central Base Tube (5) from step 2. Insert them into the bottom plate under the Sest Cushion (2) which has a hole in the middle. Press the Seat Cushion (2) from top. Then connect the Backrest (1) and Steel Plate (11) and tighten the Screws 6x25mm (14) with Hexagon Wrench (9). Then fasten the Seat Cushion (2) with Steel Plate (11) and tighten the Screws 8x25mm (15) with Hexagon Wrench (9).

Step 4

Tighten the Screws Bx40mm (13) with Hexagon Wrench (9) and fix the 2 Armrests (3) between the Backrest (1) and the Seat Cushion (2). Tighten the 4 screws firmly and then cover the screws with Decoration Caps (10). The assembly is complete now. Caution when you confect the amrest with the cabin the position of the armrest is aligned with the hole portion of the cuce the rest with the hole position of the thos and install th Caution: After the product is fully the screws for tightening.

Activate Your Warranty Now!
We guarantee you a pleasant buying experience, Please scan the QR code to activate your warranty so that you can enjoy priority better after-sales service.

Scan the QR code to watch the installation video.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>