NEWSKILL HORUS ZEPHYR Gaming Chair Instruction Manual
- June 6, 2024
- NEWSKILL
Table of Contents
HORUS ZEPHYR Gaming Chair
Instruction Manual
COMPONENTS
| 1. Backrest | 10. Castors X5 |
|---|---|
| 2. Seat | 11. M8x2Omm Screws X8 |
| 3. Cushion | 12. M8x25mm Screws X4 |
| 4. Lumbar Support Cushion | 13. M5x12mm Screws X2 |
| 5. Mechanism | 14. Anti-slip screw X4 |
| 6. Side Covers | 15. Gasketx4 |
| 7. Gas Lift | 16. Rubber Gasketx4 |
| 8. Gas Lift Cover | 17. Arm rests |
| 9. Base | 18. M8 Hex Key |
MOUNTING STEPS
| 
---|---
Push and twist the wheels into the starbase.
And place the cylinder cover over the gas lift.| Align the butterfly mechanism
with the screw holes
at the bottom of the seat as shown in image above.
| 
Attached are the seats to the base.| Fasten the backrest with provided screws.
| 
Fasten the side covers, and put the small side cover on| Finish
GOT QUESTIONS?
http://www.newskillgaming.com/es/soporte/
ATTENTION!
- Verify all parts before assembly.
- The pictures in this guide may not look like your chair, but the instruction guide is the same regardless of the model.
- Do not use the chair unless all the bolts and screws are tight.
- At least every six months check all bolls and scores to ensure they are tight.
- Don does not use this chair as a step stool/ladder.
GOT QUESTIONS? Gonewskillgaming.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>