NEWSKILL IC27Q4-V2Z 27 Inch QHD Resolution Monitor User Manual

NEWSKILL IC27Q4-V2Z 27 Inch QHD Resolution Monitor

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Important Safety Precautions

1. Please read all the instructions carefully before using this product.

2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid detergent or spraying detergent, but wipe it with wet soft cloth. If it is still not clean, please use special detergent for LCD.

3. DO NOT use accessories not authorized by the manufacturer, other wise they may incur danger.

4. When disconnecting the power cord of display or power adapter, always remember to hold the plug instead of puling the wire to unplug the power cord.

5. Keep the display away from water sources such as bath tub, washbasin, sink or washing machine.DO NOT place the display on wet floor or near a swimming pool, or press LCD surface with fingers or hard objects.

6. The grooves and openings on the back and bottom of the shell are for ventilation purpose and also for guaranteeing the reliability of the elements and preventing them from overheating; in order to prevent the vents from blocking;
   DO NOT place the display on bed, sofa, carpet or other similar surfaces; DO NOT place the display near to or on heat radiator or heater; DO NOT put the display into embedded device, unless it is provided with adequate ventilating equipment.

7. Only the type of power source indicated on the nameplate applies to this display. If you have any questions on the type of power source you use, please consult the dealer of the display or local administration of power supply.

8. For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin of this plug is for grounding, and only applicable to socket that is correctly grounded. In case that your socket is not available for the plug, please contact electrician to replace the socket.

9. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the display by yourself, but request qualified maintenance staff to carry out.

10. In one of the following cases, please unplug the display or the power adapter and ask qualified maintenance staff for help:
    a. The power cord or the plug is impaired or worn.
    b. The display falls off or the shell is damaged.
    c. The display is obviously abnormal.

11. Please place the display in a cool, dry and well ventilated place.

12. Store the display in temperature range of -10°C~60°C, beyond which the display may be damaged permanently.

Power & Electrical Warnings
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.

• Read the safety instructions carefully and thoroughly.

• All cautions and warnings on the device or user’s manual should be noted. Refer servicing to qualified personnel only.

• Keep the User’s Guide that comes with the package for future reference.

• To prevent fire or shock hazard, keep this device away from humidity and high temperature.

• Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet. Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet. Always disconnect the power cord or switch the wall socket off if the devicewould be left unused for a certain time to achieve zero energy consumption.

• Place the power cord in a way that people are unlikely to step on it.

• Do not place anything on the power cord.

• The ventilator on the device is used for air convection and to prevent the device from overheating.

• Do not cover the ventilator. Lay this device on a reliable flat surface before setting it up.

• Do not leave the device in an unconditioned environment with a storage temperature above 60OC or below -20OC, which may damage the device.

• NOTE: The maximum operating temperature is around 40OC
  

• When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock.

• Always keep strong magnetic or electrical objects away from the device.

• If any of the following situations arises, get the device checked by service personnel:

• The power cord or plug is damaged.

• Liquid has penetrated into the device. The device has been exposed to moisture.

• The device does not work well or you can not get it work according to user’s manual. The device has dropped and damaged. The device has obvious sign of breakage

Warning!
Overuse of screens is likely to affect eyesight Recommendations:

1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2 years and over, screen time should be limited to less than one hour per day

IMPORTANT SAFETY PRECAUTIONS
Do not expose the monitor to a humid environment, rain or other liquids.
Do not open the monitor housing to avoid any shock due to electrical or mechanical hazards. Operation

• Keep the monitor out of direct sunlight or other heat sources like stoves.
• Keep the monitor away from any liquid.
• Remove any object that could fall into the ventilation holes.
• Do not block the ventilation holes to avoid overheating.
• Do not knock or drop the monitor.

CAUTION
Unplug the power cable from the outlet before cleaning the monitor.

• To clean your screen, slightly moisten a soft, clean cloth with water.
• Please use a special screen-cleaning tissue if possible.
• Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
• Inappropriate cleaning solutions may damage the monitor or leave a milky film on screen or housing.
• Unplug the monitor if you are not going to use it for a longer time period.
• Do not expose the monitor to dust, liquids or a humid environment.
• In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth.
• In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore. Please contact a professional service technician..

Product Description

Packing list
Please check the following items in the packing case before installation: If any of above items is missing, please contact with the dealer.

Product Overview

Monitor Buttons

Monintor Ports
Connect the signal line to output interfaces signal of DP/HDMI signals of PC, and then connect the other end of the signal line to the corresponding signal input port of the display.

Stand Installation

Keep the foam underneath the monitor before attaching the stand.

1. First open the carton, take out the foam and align it on the desktop, remove the PE bag, and place the body on the foam. press the lock down vertically with your hand to remove the hinge assembly.
2. Lock the shaft assembly and the bracket with 2 PM410mm screws, and then lock the 3 PM410mm screws to the base.
3. As above, vertically push the lock catch. Put stands assembly parts into slot of back cover accordingly and make them mechanically placed. Hold the middle of stand and make sure the monitor won’t drop outMake sure the monitor is laid on a flat surface before removing the stand.

Wall Mounting

This monitor only includes screws which may be used when attaching the monitor to a VESA 75*75mm type mount. No VESA mount or mounting accessory is included.

1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to remove the stand plate.If the monitor was already attached to the stand, remove the stand.
2. Remove the original screws from the opening in the back of the monitor. Then use the 4pcs PM4*16 screws to attach the adapters inside the opening.
   • Do not discard the original screws.
   • Use only the 4pcs PM4*16 screws provided.You MUST follow the instructions below for secure installation.
3. Your monitor is now ready to be attached to a wall-mounting bracket. To avoid damage, please do not pinch the screen during bracket installation.

Basic Operation

1. Insert one end of the DP cable into your PC’s graphics card. A HDMI cable may also be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
4. Press the power button to turn on the monitor.

Connectivity Options

Connecting the Power Cable
Connect the included power cable to the power connector, and then plug the other end into an wall outlet.

HDMI Connectivity
In order for the monitor to receive HDMI signals from the comptuer, use the HDMI cable to connect the monitor to the computer.

Connecting Your Earphones

Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices are not included.
DP Connectivity
In order for the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer Indicator Lights

Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source ,no horizontal or vertical signal has been detectde or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.

OSD Menu

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button.
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc.

1. Press one of the buttons to activate the navigation window.
2. Press M to enter the OSD screen.
3. Press or to browse functions.
   • Highlight the desired function, then press M to enter the sub-menu.
   • Press or to browse sub-menus, then press M to highlight the desired function.
   • Press or to highlight an option, then press M to confirm the settings and exit the current screen.
4. Press E to exit the current screen.

OSD Menu Functions

Input Source

| HDMI1 (2.0);

HDMI2 (1.4);

HDMI 3 (1.4)

| ****

NONE

| ****

Switch to HDMI signal input

DP| NONE| Switch to DP signal input

Brightness/ Contrast

| Brightness| 0~100| Adjust display brightness
Blacklevel| 0~100| Adjust display black level
Contrast| 0~100| Adjust display contrast

DCR

| On| Turn on DCR function
Off| Turn off DCR function

Color Setting

| ****

Gamma

| Gamma 1.8| ****

Set Gamma add-in

Gamma 2.0
Gamma 2.2
Gamma 2.4
Gamma 2.6

Picture Mode

| Standard, Photo, Movie, Game, FPS, RTS| ****

Set visual mode according to activity

Color Temperature| Warm, Cool, User| Select color temperature
Low blue light| 0~100| Set blue light filtering level
Hue| 0~100| Adjust hue levels
Saturation| 0~100| Adjust Saturation levels

Picture Quality Setting

| Sharpness| 0~100| Set display sharpness
Response Time| Off,High,Middle,Low| Turn On/Off the response time of the monitor
Noise Reduction| Off,High,Middle,Low| Reduce the interference of image noise caused by signal source interference

Super Resolution

| ****

Off,High,Middle,Low

| When the resolution of the display screen is low, this function can be turned on to enhance the image resolution
Dynamic Luminous control| On,Off| Compensate for gray scale display screen and strengthen the expression of gray scale

Display

| Aspect Ratio| Wide Screen, 4:3, Auto| Select on-screen aspect ratio
LedMode| Normal, Flicker, Off| Select LED modes / turn LEDs on/off

Audio

| Mute| On, Off| Turn mute mode on / off
Volume| 0-100| Adjust audio volume

Audio Source

| DP1, HDMI1 (2.0),

HDMI2 (1.4),

HDMI 3(1.4),

AutoSource

| ****

Select audio signal input via HDMI or DP

Multi-Window

| Multi-Window| Off, PIP Mode, PBP 2Win| Select PIP/PBP modes according to the number of input signals etc.
Sub Win2 Input| DP, HDMI1, HDMI2, HDMI3| Select according to input signal for PIP/ PBP mode
PIP Size| Small, Medium, Large| Adjust the PIP/PBP window size

PIP Position

| Top Right, Top Left, Bottom Right, Bottom Left| ****

Adjust the PIP/PBP window position

Swap| NONE| Swap the PIP/PBP signal sources

OSD

| ****

Language

| English, 簡体中文 , 한국 어 ,Pycck i, E panol, 日本語, Francais, Deutsch| ****

Set OSD Language

OSD H-Position| 0-100| Adjust the OSD’s horizontal position
OSD V-Position| 0-100| Adjust the OSD’s vertical position
OSD Transparency| 0-100| Adjust OSD’s overall transparency
OSD Time Out| 5-100| Set how long the OSD remains open after non- use

OSD Rotation

| ****

Normal, 90 ,180 ,270

| When the user flips the display, this function can also flip the OSD to achieve the best display angle

Other

| DP Version| DP1.2, DP 1.1|
Adaptive-Sync| On,Off| Turn the FreeSync function on/off
Reset| None| Reset monitor configurations

ECO Modes and Gameplus Switching

1. Press any one of the buttons to activate the navigation window.
2. Press button to switch Gameplus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.
3. Press button to switch ECO modes. These modes include Standard, Text, Movie, Game, FPS, and RTS and can be used to optimize settings according to your activity. Standard mode is suitable for most activities.

Technical Specifications of Product

25601440@75Hz
Refresh Rate| 144Hz
Response Time| 1Ms MPRT
Viewing Angle| ≥178°(H)°/ ≥178°(V)°
Contrast Ratio| 4000:1
VESA Mounting| 7575mm
Colours| 16.7M
Adaptive-Sync| Yes
Signal Input| DP 1.21, HDMI 1.42, HDMI 2.0*1
Audio
Speakers| NO
Audio Out| Yes
Accessories
Power| DC 12V      4.0A
DisplayPort Cable| Yes
Additional Functions
Low Blue Light| Yes
Flicker Free| Yes
Physical Dimensions
Dimensions (w/ Stand)| 616.2 x 445.7 x 237.4mm
Dimensions (w/o Stand)| 616.2 x 367.2 x 100.7mm
Net Weight| 4.96Kg
Gross Weight| 6.20Kg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>