NEWSKILL ATON Professional Wireless Gaming Headset User Manual
- May 15, 2024
- NEWSKILL
Table of Contents
NEW SKILL ATON Professional Wireless Gaming Headset
Safety Instructions
- Listening at high volume for prolonged periods can damage your hearing. Before using the headphones, set the volume to the lowest level.
- Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers.
- The packaging material is not a toy.
- This product does not contain any parts which can be serviced by the user.
Cleaning
- Disconnect the USB connection before cleaning.
- Only clean the outside of the product using a soft and dry cloth.
- Only use a clean, dry cloth for cleaning the product and never use any corrosive liquids.
Disposal
- Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
- Please be informed about the local separate collection system for electrical and electronic products.
- Please act according to your local rules and do not dispose of your old products with your normal household waste.
- The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.
TECHNICAL SPECIFICATIONS
- Model Newskill ATON
- Headset dimensions 20590215MM (lengthwidthheight)
- Headset weight 306gr
- Connection type USB Type C to USB, 2.4Ghz Wireless Connection,
- Bluetooth 5.0 low latency, 3.5mm Jack to 3.5mm Jack (audio connection)
- Connection Distance 10 Meters Approx
- Battery 3.7V/1200mAh
- Battery Durability 20h (with lighting at a maximum of 60% volume) 45h (with lighting at a maximum of 60% volume)
- RGB Fast RGB Cycle / Slow RGB Cycle / Fixed Colors / Off
- Wiring length 1.8m
- Earmuff material Soft breathable sweat-resistant fabric
- Diadem Metallic, Dually adjustable with 25mm travel
Microphone
- Type Retractable flexible microphone
- Polarity Omnidirectional
- pop Yes, removable
- Sensitivity -38±3dB
- response frequency 100-10kHz
- SPL Max. -42±3dB
- Backlight Yes, Blue/Off
Headphones
- Type Stereo
- Dimensions Ø50mm
- Sensitivity 118±3dB
- Impedance 32Ω±15%
- Frequency range 20-20,000Hz
- Compatibility PS4, PS5, Xbox Series X/S, Switch, PC, Smartphone
- PS4/PS5 Wireless 2.4Ghz / Jack 3.5mm Xbox series 3.5mm jack
- Switch Series 3.5mm jack / Bluetooth 5.0
- smartphones Bluetooth 5.0 & Jack 3.5mm (depends on the terminal)
- PC/Mac Wireless 2.4Ghz / Bluetooth 5.0 / USB to USB Type C
- Packaged Dimensions 20895220mm (lengthwidthheight)
- Packaged Weight 330gr
DIMENSION
WHAT IS IN THE BOX
- Headphones ATON
- Wireless USB Dongle
- USB to Type C cable
- 3.5mm Male-Male Jack Cable
- Adapter Jack 3.5mm x 2 to 1 Jack 3.5mm
- Newskill Accessories
GENERAL DESCRIPTION
-
USB TYPE C input
-
LED status indicator
- Red Led always on: Charging Blue Led
- flashing: Headset not paired Blue Led
- Fixed: Paired headset (Wireless)
-
POWER
- Long press to turn on/off
-
Choice of Connection
- Flip the switch to swap between wireless connection types. Red: 2.4Ghz. Green: Bluetooth 5.0.
NOTE: To connect the headset by cable it is not necessary to turn it on, just connect it by USB Type C or by Jack 3.5mm (It is not necessary to have a battery)
- Flip the switch to swap between wireless connection types. Red: 2.4Ghz. Green: Bluetooth 5.0.
-
Volume roulette
- Volume + / Volume –
- Removable breathable earmuffs
-
Mute / Lighting
- Press once to turn the microphone on or off
- Long press to switch different light modes.
- Retr portable microphone
-
Removable breathable earmuffs
-
Retractable microphone with pop filter
POWER BUTTON
Power on
Press the power button for 2.5 seconds when the headset is off.
Power off
- Press the power button for 2.5 seconds
- when the headset is on turn off the device
- Press once to pause/hang up calls/ answer calls
CONNECTION METHOD
2.4Ghz WIRELESS
Press the power button for 2.5 seconds when the headset is off. Move the
switch to switch between wireless connection types. RED COLOR, WIRELESS 2.4Ghz
BLUETOOTH CONNECTION
Press the power button for 2.5 seconds when the headset is on to turn off the
device. Move the switch to switch between wireless connection types. GREEN
COLOR, WIRELESS BLUETOOTH 5.0
HOW TO CONNECT ATON
WIRELESS CONNECTION 2.4Ghz low latency
- Connect to your PC, Mac, or PlayStation 5 or 4 with 2.4 GHz wireless technology: Insert the receiver into the USB port of your device.
- Press the power button for a minimum of 2.5 seconds
- Make sure the connection selection switch is set to Red
- The BLUE LED will start blinking until it is not paired
- Once paired with the receiver the LED will remain Fixed in a blue tone
BLUETOOTH 5.0 WIRELESS CONNECTION
Connect your ATON headset to any device with BLUETOOTH technology
- Press the power button for a minimum of 2.5 seconds
- Make sure the connection selection switch is GREEN.
- Select on your preferred device the name “ATON” and pair it with the device
NOTE: ATON can only connect to one bluetooth device at a time.
3.5mm JACK CABLE CONNECTION
Aton works by 3.5mm audio cable connection. We also include a dual 3.5mm to 1
x 3.5mm adapter so you can connect it to any audio device.
NOTE: ATON does not require power to connect by cable, so it can work
without a battery.
NOTE 2 : Audio cable connection does not power RGB lighting.
MUTE & LIGHTING
How to mute the microphone of ATON?
- Aton has a microphone retractable with an integrated blue LED.
- Press to turn off the microphone, and the blue light will turn off.
- Press again to activate the microphone, and the light will be on again.
How to change the backlight of ATON?
Press more than 2 seconds to switch between the different light cycles.
NOTE: ATON has an internal memory that saves the backlight configuration,
therefore, regardless of whether you turn the device off or on, the lighting
chosen last time will remain.
INSTALLATION VERIFICATION
To ensure that ATON is configured correctly, follow the steps below.
- WIRELESS 2.4GHZ In Windows 10/11 we go to System > Sound and in the output section and select “R TL8753BAU”.
CONNECTION BY 3.5mm JACK
In Windows 10/11 we go to System > Sound and in the output section select “R
TL8753BAU”.
BATTERY CHARGING AND OPTIMIZATION
ATON includes a highly durable 3.7V/1200mAh Lithium battery Its duration is as
follows:
- 20h (with lighting at a maximum of 60% volume)
- 45h (with lighting at a maximum of 60% volume)
When the battery charge reaches 5% ATON will start making sounds to connect
it. We include a USB A to USB Type C cable to connect the device and charge
it, we recommend using a USB 3.0 PC socket for more efficient charging. If
this is not possible, we recommend charging with a low-voltage USB charger
(10-20W) Max. The charging time is approximately 2.5 hours.
NOTE: ATON CANNOT be charged at the same time as using any of your wired
or wireless connections.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>