Power System Electronic Technology F1 Fast Wireless Charger User Manual

June 6, 2024
Power System Electronic Technology

Power LOGO

Fast Wireless Charger
User Manual
Model NO.: F1

Other mobiles need a wireless charging receiver(include android phones and iPhones)
(Note: All devices must be Qi standard)

Product Specification

Input : 9V/1.67A, 5V/2A
Output : 10W(max
Efficiency : ≥73%
Transmission distance : <8mm
Standards: Qi
Attention
1, Please use a 9v/1.67A or 5Vi2A adapter and high-quality cable to ensure the charging effect
2, If you want to clear the charger, please make sure it is not connected power supply

Attention:

  1. Please keep the charger away from water or other liquid.
  2. If you need to clean the charger, please make sure it is not connected power supply.
  3.  Using Environment temperature remains 0-45 ℃

Power System Electronic Technology F1 Fast Wireless
ChargerThe handset requires a center emitter for wireless charging as shown
Standard Accessories Wireless Charger USB Cable User Manual

Product Introduction

The wireless charger is an intelligent product, with a simple design and is compatible with any mobile phone with Qi standard. The mobile phone is without a plug when charging. which is more convenient and efficient. It can bring you limitless life experience as well as a safe and free experience with wireless charging function. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:

  1.  This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The device can be used in fixed/mobile (equal or greater than 20cm) exposure conditions. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This product is compatible with QI standard Power System Electronic
Technology F1 Fast Wireless Charger- ICON

This device complies with part 15 of the FCC Rules
Made in China

Documents / Resources

| Power System Electronic Technology F1 Fast Wireless Charger [pdf] User Manual
PS393, 2AQTM-PS393, 2AQTMPS393, F1 Fast Wireless Charger, Fast Wireless Charger, Wireless Charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals