GREE 3VIR09HP115V1AH Single-Zone Heat Pump System User Guide
- June 6, 2024
- Gree
Table of Contents
GREE 3VIR09HP115V1AH Single-Zone Heat Pump System User Guide
MODELS:
3VIR09HP115V1AH
3VIR12HP115V1AH
3VIR09HP230V1AH
3VIR12HP230V1AH
3VIR18HP230V1AH
3VIR24HP230V1AH
NOTE: Please read the complete owner’s manual carefully before operation
INDOOR UNIT FRONT PANEL DISPLAY
Look here for LED display of system status, setpoint. indoor and outdoor temperatures and malfunction rodes.
Press to power the unit
on or off.
Press to select fan speed (Auto, Low, Medium, High or Turbo). Auto is
default.
Press to select and adjust each mode.
HEAT COOL DRY FAN ONLY AUTO
Press to raise settings including temperature and time.
I feel.
Press to boost cooling or heating airflow. Quickest way to reach preset
temperature.
Press to lower settings including temperature and time.
Press to select temperature display: indoor, outdoor or desired room
temperature (Adjust desired temperature with “ “ and “ “ buttons.)
Press to select SLEEP mode, offering custom comfort control while sleeping.
See Owner’s Manual for more details.
Press “WiFi” button to turn on or turn off WiFi function. WiFi module will
restore to factory default setting.
Press to display time of day.
Press to turn lights on the unit’s Front Panel Display. Press again to turn
off.
Press to start or stop
the timer. (Adjust with “ “ and “ “ buttons.) See Owner’s Manual for more
details.
Left & right swing.
Up & down swing.
Health mode / Scavenging function.
KEY FEATURES & FUNCTIONS
AUTO CLEAN FUNCTION
Under unit off status, hold “MODE”and “FAN” buttons simultaneously for 5s to
turn Auto Cleaning on or off. When Auto Clean is on the indoor unit displays
“CL” and the unit will heat up and cool quickly. You may hear the sound of
flowing liquid or thermal expansion or contraction. Make sure the room is well
ventilated at this time as the unit may blow cool or warm air, this is normal.
MULTI FAN SPEEDS
Whether operating in either Cooling or Heating mode, the indoor fan can be set
to your choice of four different speeds (Low, Medium, High or Turbo) to
achieve maximum comfort.
DRY MODE
During warm, humid conditions, selecting this mode will help to increase
moisture removal in your room for added indoor comfort. Fan speed cannot be
adjusted in Dry Mode.
FREEZE GUARD MODE
This “vacation mode” feature offers protection against potential water pipe
freeze-up while away from home. It automatically keeps room temperature from
getting too cold.
INTELLIGENT DEFROST
This increases room comfort and saves energy by sensing the need for
defrosting and eliminating unnecessary defrost cycles.
POWER FAILURE MODE
Your settings and parameters are stored in non-volatile memory and are
retained during a power failure.
I FEEL MODE
This function senses the temperature at the remote controller instead of at
the indoor unit. It then adjusts airflow and temperature accordingly for the
ultimate in personal comfort control and energy savings.
SLEEP MODE
You design a cycle to automatically adjust room temperatures during your sleep
time, to maximize comfort and reduce utility bills.
INTELLIGENT PRE-HEATING
In heating mode, the system delays fan activation until the coil has warmed
up, to prevent blowing uncomfortable cool air into the room.
SELF-DIAGNOSIS
The built-in computer uses real-time diagnostics to continuously scan for
errors or malfunctions. Fault codes are shown on the unit display to
facilitate troubleshooting.
SELF-DIAGNOSIS
Saves energy by preventing indoor coils from being plugged with dirt and lint.
May be washed, vacuumed and reused.
FAQs
Why does the fan continue to run even when the unit is not cooling or
heating?
To maintain consistent temperatures and minimize energy-loss from constant
starts and stops, the fan keeps air flowing past the thermostat.
What temperature is displayed on the remote controller?
The remote always displays your desired indoor temperature. (You may view
current indoor and outdoor temperatures, as well as desired temperature, on
the indoor unit’s Front Panel Display.)
What happens if the remote is lost or damaged?
Use the Aux button to manually operate the unit. Lift up the front panel
section on the indoor unit and locate the button on the righthand side. Press
the button to turn the unit ON or OFF. (Not all functions will be available.)
Press again to cancel Aux Mode and transfer control back to the remote
controller.
Not all features available on all models. Your actual system and related
devices may differ from the images shown in this manual.
For complete instructions on these and other functions, as well as important
safety information, see the Owners Manual.
For more information, visit greecomfort.com.
Specifications are subject to change without notice. Manufacturer reserves the
right to discontinue, or change at any time, specifications or designs without
notice or without incurring obligations.
©2021. AII rights reserved.