REXING S1 Dash Cam 3-Channel Front User Guide
- June 6, 2024
- Rexing
Table of Contents
REXING S1 Dash Cam 3-Channel Front User Guide
The information in this manual is subject to change without notice. Rexing All Rights Reserved
1. Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
Our support team will respond you as soon as possible.
Always a surprise in Rexing.
Check us out here
- https://www.facebook.com/rexingusa/
- https://www.instagram.com/rexingdashcam/
- https://www.rexingusa.com/support/registration/
- https://www.rexingusa.com/support/product-support/
2. What’s in the box?
- S1 Quick Start Guide
- Safety Guide
- USB Cable
- 3M Adhesive Mount
- cable Adhesive Spacer
- Cable Management Tool
- Rexing S1 Dashboard camera
- Car Power Connector (12ft)
- Rear camera and Rear camera cable
3. Camera Overview
-
Power Button
-
Menu Button I Mode Button
-
Left Navigation Button I Record Button
-
OK (Confirm) Button I Emergency Lock Button
-
Right Navigation Button I Screen
Toggle Button I Hold to take photo -
Front Camera
-
4 IR Lights I Cabin camera
-
Power I USB Charging Port
-
Micro SD Card Slot
-
Rear Camera Port
-
Reset Button
Screen Icons
4. Installation
Step 1
Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount square to the
roof and hood line of the vehicle.
Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera. Orient the mount as shown on the illustration above.
Step 2
lnsert the Memory Card
The Rexing S1 accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to
256GB. You will need to insert a memory card before you can begin recording.
Before inserting or removing a memory card, first ensure you’ve powered down
the device. Gently push the memory card in until you hear a click, and allow
the spring release to push the card out.
Step 3
Power the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and
camera. To ensure the Sl records to your memory card properly and without
error. Before you start using a new memory card, you must format the card
within the camera using the format function. Always backup important data
stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then tum on the device by connecting to a power source. Press Left Navigation Button to stop recording. Then press the MENU button twice to enter the System Setup Menu.
Press the Yea button ID confirm formatting the card
Use the RIGHT and LEFT navigation buttons and go to the Memory card setting. Press the OK button to confirm the selection. You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on.
Step 4
Mount the Rear camera
Mount the rear camera as shown below. Use the provided rear camera cable to
connect the rear camera to the front camera.
Step 5
Installing the camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the
windscreen and tuck it under the trim.
Plug the car charger cable to a 1 ZV DC power outlet or the car cigarette lighter. Connect car charger to the camera. The camera will auto-start recording once It’s powered on.
5. Basic Operation
Device Power
The device will be automatically powered on when plugged into a 12V accessory
socket or cigarette lighter when receives a charge (i.e.: the vehicle is
started). To tum the device on manually, press and hold the Power button
until the welcome screen appears.
The camera will automatically start recording when it’s powered on.
Menu Settings
Power the camera On. If the camera is recording, press the Left Navigation
button to stop recording.
Hold the MENU button and toggle to the desired mode. Press the MENU button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings (Set up). Hold the MENU button to exit settings.
Video Recording
The camera will automatically start recording when the device receives a
charge. The LED lights and red dot will blink red device when recording. Press
the Left Navigation button to stop recording.
Video Playback
Playback of videos can be done on the device or a computer. To playback a
video on the device, hold MENU button toggle to the Playback mode. Hold MENU
button to Change the views. Use the Right and Left navigation buttons to
toggle to the desired video. Press the OK button to play.
During playback, use the OK (pause), Left navigation (rewind) and Right navigation (fast forward) buttons to control the video playback. Hold OK Button to exit the current Mode.
To playback a video on the computer. either use an SD card adapter or connect the device to the computer directly using the USB cable.
To playback a video using an SD card adapter, remove the memory card and Insert It into an SD card adapter. Place the adapter in the computer. Then place the adapter into the computer.
To playback a video using USB cable, connect the USB Cable to the device and the computer. After the device is powered on, press the OK button to select MSDC.
On the computer, navigate to device drive. The videos are stored at the files. The locked videos are stored at:\Event.
Select the video to playback.
Taking Photos
Hold the Left navigation button to take a photo.
To view a photo, stop video recording and hold MENU button to toggle to the
Playback Mode. Hold MENU button one more time to enter the Photo playback
mode.
Press the Left and Right Navigation buttons to toggle through your photos.
To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos end photos to the one you want to delete.
Wi-Fi Connect
Download “Rexing Connect” app from the App Store/Google Play Store.
-
To access or exit the Wi-Fi feature, hold down the OK Button. Press Menu Button four times to find the wifi info.
-
Open Wi-Fi settings on your phone, find “SSID” from the list, tap to connect.
(Default password: 12345678) -
Open the Rexing Connect app, tap “Recorder” to enter the real time video streaming page.
4. Once connected, the dash cam screen will switch to the camera view and will display “WIFI Connected” message. Using the Rexing Connect app, you can view a live preview of the dash cam screen, start/stop recording, as well as view and save your captures with your mobile device.
Warranty & Support
Warranty
The Rexing S1 Dash Cam comes with a full 12-month warranty. If you register
your product on our official site
(https://www.rexingusa.com/support/registration). you can extend the
warranty to 18 months.
Support
If you have any questions regarding your product please do not hesitate to
contact us at care@rexingusa.com, or call us at
877-740-8004. Queries are typically
answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and
user experience. If you have any thoughts on how we can do even better, we
welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>