MIDLAND BTRUSH Mesh and Bluetooth Conference System User Guide

June 6, 2024
MIDLAND

MIDLAND -logo BTRUSH
MESH & BLUETOOTH CONFERENCE SYSTEM

MIDLAND BTRUSH Mesh and Bluetooth Conference System -

HIGH DEFINITION SOUND BYRFC POCKET GUIDE

ON/OFF

DESCRIPTION OF BUTTONS

SWITCH ON

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-swtich

SWITCH OFF

MIDLAND BTRUSH Mesh and Bluetooth Conference System - swtich
on

PAIRINGS

DESCRIPTION OF BUTTONS

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-PAIRINGS

ATTENTION: To carry out any pairings you need to access Settings. If the Control button is pressed for fewer than 7 seconds, the device will switch itself on instead of accessing Settings. If this occurs, repeat the process.

ACCESS SETTINGS

Status: device off

PHONE, GPS, TFT PAIRING
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-PHONE

Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -.

MIDLAND INTERCOM PAIRING
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-MIDLAND

Press for 3 seconds Press for 3 seconds
Flashes Flashes
Confi rm (1 sec.) Confi rm (1 sec.)

Pairing successful

OTHER BRAND INTERCOM PAIRING
Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System -OTHER
BRAND

prss for 7 seconds Follow procedure to pair with phone

| Flashes fast (press and hold)
Flashes slowly (Release)
MESH DYNAMIC REPEAT SECURE PAIRING

Status: Settings
MASTER| OTHER MEMBERS of the GROUP
MIDLAND BTRUSH Mesh and Bluetooth Conference System
-MESH

Press for 7 seconds

|

Press for 3 seconds

Flashes fast

|

    Flashes

When the intercoms of all members have received the
Secure code (fl ashing stops) press the Control button 2 times.

|

Code received

RESET BLUETOOTH PAIRINGS

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-RESET

MESH DYNAMIC REPEAT SECURE RESET

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-MESH1

Frequency (GHz) Max power (mW)
2.402 – 2.480 100

EXIT SETTINGS MODE CANCEL PAIRING

Status: Settings

MIDLAND BTRUSH Mesh and Bluetooth Conference System
-EXIT

OPERATING MODES

A. Intercom Mode: to communicate with another device via Mesh or Bluetooth.
B. Phone Mode: for phone calls or for managing music.
C. FM Radio Mode: to listen to, search for, and store radio stations.
Note: Phone mode is only active when there are devices paired to the Vol+/Vol- buttons.

CHOOSE OPERATING MODE

Note: By pressing simultaneously Vol + and Vol – for 1 second, BT Rush communicates the selected operating mode.
Attention: to communicate the participants must be in the same Mesh group and have different IDs.

Conference Mesh Group: 10 people in a 1.4 Km bubble.
Mesh Dynamic Repeat Group: 6 people within 3.5 Km.
Mesh Dynamic Repeat Secure Group: 6 people within 3.5 Km with Secure key assigned for private communications.

INTERCOM MODE

The default Mesh Group is set to Dynamic Repeat. For further information consult the online manual (www.midlandeurope.com) or the tutorials on YouTube – Midland World.

**MESH IDENTIFICATION CODE (ID) SELECTION

**

TABLE 1 – IDS ASSIGNED TO THE VARIOUS GROUPS:

GROUP ID GUEST LED
Mesh Conference 1-10 Infi nite
Mesh Dynamic Repeat 1-6 Infi nite
Mesh Dynamic Repeat Secure 1-6 Infi nite

Guest: listening mode only

FUNCTION DESCRIPTION

Note: to communicate with Rider 1 repeat the process of pressing the Up button.

TO OPEN/CLOSE INTERCOM BY VOICE

Status: in all modes

| Say “Hi”
---|---
Jingle
Flashes
Silent for 40 sec. the intercom deactivates
Beep

Note: Voice activation is only possible with an intercom paired with the down button.

VOX ACTIVATION/DEACTIVATION
Status: in all modes

SHORTCUT: In Intercom mode pressing Control 2 times activates/deactivates the music.

TO OPEN/CLOSE UNIVERSAL INTERCOM
Status: Intercom mode

Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call 2 times)

SHORTCUT: In Phone/FM Radio modes pressing Control 2 times activates/deactivates Mesh communication.

PHONE MODE

FUNCTION DESCRIPTION

Note: If you have a phone paired with the Vol – button, use the Down button.

SHORTCUT: In Phone/FM Radio modes pressing the Down button 2 times turns the Intercom on/off.

ANSWERING/ENDING A CALL REJECTING A CALL

Status: Phone mode

Note: If you have a phone paired with the Vol – button, use the Down button.

MUSIC

Status: Phone mode

RADIO MODE

FUNCTION DESCRIPTION

FM RADIO

Status: Radio mode

| x1
Press 1 time ON/OFF
---|---
| x1
Press 1-time Next station
3”
Press for 3 seconds Next preset
| x1
Press 1-time Previous station
3”
Press for 3 seconds Previous preset

Go to our website www.midlandeurope.com, download the complete manual and the BT Updater software.

Customize your intercom with the BTPRO SetApp. Download it here:

https://play.google.com/store/apps/details?id=com.midlandeurope.btsetapppro&hl=it&gl=US

|

https://apps.apple.com/it/app/btpro-setapp/id1511695564

---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals