ECHELON ECHTES-101 Touch Screen User Manual
- June 6, 2024
- Echelon
Table of Contents
ECHELON ECHTES-101 Touch Screen
About This Document
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to,
electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Echelon Fitness Multimedia LLC.
The information in this document is subject to change without notice. Echelon
makes no representations or warranties with respect to the contents herein,
and specifically disclaims any implied warranties of merchantability or
fitness for a particular purpose. Echelon reserves the right to revise this
publication and to make changes from time to time in the content hereof
without obligation of Echelon to notify any person of such revisions or
changes. Windows is a registered trademark of Microsoft, Inc. Other brand or
product names are trademarks of their respective holders.
Compliance Information For FCC (USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
For IC (Canada)
CAN ICES-3(B)/NMB-3(B)
For CE (EU)
The device complies with the EMC Directive 2014/30/EU and Low Voltage
Directive 2014/35/EU
Caution: The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Usage Notice
Warning – To prevent the risk of fire or shock hazards, and do not
expos e the product to moisture.
Warning – Please do not open or disassemble the product as this may
cause electric shock.
Warning – Power cord shall be connected to a socket-outlet with
earthing connection
Warning – The cable cover cannot be removed under normal use
conditions.
Warning – Stability Hazard. The touch monitor may fall, causing serious
personal injury or death. To prevent injury, this touch monitor must be
securely attached to the wall in accordance with the installation
instructions
Precautions
**** Please follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
Do:
- Turn off the product before
- Use a soft cloth moistened with mild detergent to clean the product
- Use only the qualified power adapter that comes with your
- Disconnect the power plug from AC outlet if the product is not going to be used for an extended period of
Don’t:
- Do not use abrasive cleaners, waxes or solvents for your
- Do not operate the product under the following conditions:
- Extremely hot, cold or humid
- Areas susceptible to excessive dust and
- Near any appliance generating a strong magnetic
Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Overview
The ECHTES-101 is a thinner 10.1″ touch computer that offers a unique screw less design with expandability and flexibility, making expansion and accessory installation much easier. The versatility of ECHTES-101 is an exceptional choice for applications in all fitness sectors.
Feature
- Support Rock chip RK3288
- Support Wi-Fi 802.11ac 2T2R & BT5.0
- Support 5MP FF
- Support Screen
- Unique screw less design for better user
- Patented I/O design for better wiring management while implementation.
Specifications
System
CPU| Rock chip RK3288, Quad-core Cortex-A17 up to 1.8GHz
GPU| Mail-T760 MP4
Memory| 4GB dual channel LPDDR3
Storage| 16GB eMMC
Input Power| DC in 12V/2A 2PIN
Display| 4lane MIPI DSI, resolution up to 1200x1920P60
Touch| 10.1inch P-Cap touch sensor, supports 10 fingers touch function.
Audio| 2 x speaker (5W x 2)
G-sensor| 3-axis
Network
| Gigabit Ethernet
Wi-Fi 802.11a/b/g/n/ac, 2T2R
| Bluetooth 5.0 (Support BLE) 1T1R
---|---
External IO Ports
| 1 x LAN (Support 10/100/1000Mbps) 1 x TF slot (Support SDHC 2.0)
1 x Recovery key
1 x HDMI (Support 1080P@60Hz)
2 x USB2.0 Type-A (1 x HOST, 1 x OTG)
2 x 3.5mm earphone jack (Only one can be used at the same time)
1 x 12V DC In
1 x Power button, 1 x vol -, 1 x vol +
OS Version| Android 9.0
Operation Temp| 0°C~40°C
Storage Temp.| -20°C to 60°C
Operation Humidity| 20~80%, Non-Condensing
Storage Humidity| 10~90%, Non-Condensing
LCD Touch Panel
Size| 10.1” TFT LCD
Brightness
(non-touch screen)
|
Typical 250 cd/m2; min. 200 cd/m2
Brightness (P-CAP)|
Typical 220 cd/m2; min. 160 cd/m2
Number of Pixels| 1200 (H) × 1920 (V)/ 60Hz
Environment
Certificate
| CE、FCC、IC、LVD、UL、UKCA、RF、NOM、RCM、 ANATEL
Mounting| VESA 75 mm x 75 mm
Dimension (W x H x D)| 246.86 mm x 204.80 mm x 45.78 mm
Net Weight| 1.063 Kg
Gross Weight| 1.61 Kg
Block Diagram
Interface Connectors
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | 12V | 2 | GND |
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | TP1+ | 2 | TP1- |
3 | TP2+ | 4 | TP3- |
5 | TP3+ | 6 | TP2- |
7 | TP4+ | 8 | TP4- |
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | USB5V | 2 | D- |
3 | D+ | 4 | GND |
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | TMDS Data2+ | 2 | TMDS Data2 Shield |
3 | TMDS Data2- | 4 | TMDS Data1+ |
5 | TMDS Data1 Shield | 6 | TMDS Data1- |
7 | TMDS Data0+ | 8 | TMDS Data0 Shield |
9 | TMDS Data0- | 10 | TMDS Clock+ |
11 | TMDS Clock Shield | 12 | TMDS Clock- |
13 | CEC |
(N.C on device)
| 14| Reserved
(N.C. on device)
15| SCL| 16| SDA
17| DDC/CEC Ground| 18| +5V Power
19| Hot Plug Detect| |
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | DAT2 | 2 | DAT3 |
3 | CMD | 4 | VCC |
5 | CLK | 6 | GND |
7 | DAT0 | 8 | DAT1 |
9 | CD |
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | MIC IN | 2 | Left |
3 | Right | 4 | GND |
5 | NC | 6 | DET |
Package Overview
This product is intended to be supplied by a UL Listed Power Adapter, rated 12 Vdc, 2A minimum. (complied with LPS or PS2) Tma = 40 degree C minimum, an d the altitude of operation = 2000m minimum. If it needs further assistance wi th purchasing the power source, please contact to Echelon for further information.
About VESA Mount
**** The ECHTES-101 conform to the “VESA Flat Display Mounting Interface Standard” which defines a physical mounting interface for touch computer, and corresponding with the standards of touch computer mounting devices, such as wall-mounted. The VESA mount is located on the back of this unit.
The equipment is only for wall mounting for horizontal (output connector facing down) and vertical mounting orientations (output connector facing left or right) when EUT without base.
Please select the Echelon original screws!
The distance between the back cover surface and the bottom of the screw hole is 8 mm. Please use four M3 / 8 mm screws diameter with proper length to mount your monitor.
Note: The mounting stand must be able to support at least 2.34 lbs (1.063 Kg).
Power On / Off
Function | Description |
---|---|
Power on | Press the power button |
Power off | Press the power button 2 sec and click power off. |
Vol- | Press the vol- button to turn the volume down. |
Vol+ | Press the vol+ button to turn the volume up. |
Dimension
Declaration of the Presence Condition of the Restricted Substances Marking
ECHELON TOUCH SCREEN ECHTES-101 Equipment name: ECHELON TOUCH SCREEN Type designation (Type): ECHTES-101
Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium
(Cr+6)
| Polybrominated biphenyls
(PBB)
| Polybrominated diphenyl ethers
(PBDE)
Plastic Parts| ○| ○| ○| ○| ○| ○
Metal Parts| -| ○| ○| ○| ○| ○
Cable component| ****
-
| ****
○
| ****
○
| ****
○
| ****
○
| ****
○
LCD Panel| -| ○| ○| ○| ○| ○
Touch Panel| -| ○| ○| ○| ○| ○
PCBA| -| ○| ○| ○| ○| ○
Software| ○| ○| ○| ○| ○| ○
**Note 1:** 〝Exceeding 0.1 wt %〞and〝exceeding 0.01 wt %〞indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.。
Note 2: 〝○〞indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The〝−〞indicates that the restricted substance corresponds to the exemption.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>