Echelon Fitness Multimedia 03 Device User Guide
- June 6, 2024
- Echelon Fitness Multimedia
Table of Contents
Echelon Fitness Multimedia 03 Device
DEVICE MENU
Connect a USB mouse and left-click on the ·settings cog” in the bottom right hand corner of the screen.
You’ll then be prompted to input a password.
The password to gain access to the settings is: 123456
-
ATTRIBUTE SETTINGS
Here is a brief description of each icon: -
SERVER CONNECTION
This is to configure the device to connect to the EFACE Management software• -
FACE SETTINGS
Here is where you control various settings for the facial recognition system. -
TEMPERATURE SETTING
Here is where you will adjust the different temperature settings as well as the thresholds. -
PERSONAL REGISTRATION
If you decide to use the facial recognition piece without the software, this is where you will input the personal data. -
ACCESS RECORDS
This is where you can view current pass data on the machine. -
SPEECH SETTINGS
Here is where you will manage speech recognition settings. -
VISITOR INFORMATION
-
BLACKLIST
Here is where you will see visitors/personnel that are not allowed to enter the premises.
TEMPERATURE SETTING
You can set the Fever Temperature to whatever temperature you want to trigger an alert for a high-temperature event.
- Fever Temperature: Default setting 99.5
- Effective Temperature:
- Default Setting 30.0 (this is in C)
Alarm Sound:
Default Setting OFF
SOFTWARE SETTINGS
If you click on Software Settings, you’ll find specific options to modify general software settings.
GENERAL SETTINGS
- Prevent Unrecognized Guest: Default: OFF
- Save Information (local.server): Default: OFF
- Sleep Time (sec): Default: 1800 seconds
INFORMATION DISPLAY SETTINGS
- From the general settings menu. select Information Display Settings.
- From here you’ll be able to change the company name.
- Click on Modify Company Information.
By default there will be no data. Below is an example of what fields you will be filling out.
Once you hit Confirm you’ll be prompted with the following prompt. Hit Restart and the device will reboot and apply all new settings.
OTHER SETTINGS
Volume: Default setting is 100% Brightness: Default Setting is 80 If you want to use the EFACE Software, please send an email: technology@echelonfit.com Attn: Nelson Bertrand
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED COMPLIANCE STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
RADIATION EXPOSURE STATEMENT
This equipment complies with FCC/IC RSS-102 radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Cet equipement est conforme aux limites d’exposition aux radiations FCC/IC
CNR-102 etablies pour un environnement non controle. Cet equipement doit etre
installe et utilise avec une distance minimale de 20 cm entre le radiateur et
votre corps.