ECHELON IPX7 True Wireless Earphones User Manual
- June 6, 2024
- Echelon
Table of Contents
True Wireless Earphones
User Manual
CHARGING THE DEDICATED CARRYING CASE
Note: Before charging your earphones for the first time, please remove
and discard the plastic film from the back of each earphone.
Connect the provided USB charging cable to a power source and insert the USB-C
tip into the charging port located on the back of the carrying case. Indicator
lights on the front of the case will light up and blink when the earphones are
charging. The earphones are at full battery capacity once all four (4) lights
are lit up. Let the earphones reach full charge before use. This will take
approximately 1.5 hours if the battery was completely drained.
PAIRING YOUR EARPHONES
How to pair both of your earphones at once:
Once the earphones are fully charged, remove the earphones from their charging
case. The LED light on one earphone will flash white and the other will be
solid white. Turn on the wireless pairing settings on your smartphone, tablet,
or computer and select the device labeled “ECHBUDS”. Once the earphones are
paired, the LED light on both earphones will be solid white. Once your device
is connected, the earphones will pair automatically upon future use and stay
paired until you manually disconnect it. If the earphones are turned off,
press and hold the multi-function buttons for 2 seconds until you see the LED
light turns on.
How to pair just one single earphone:
Remove one earphone from the charging case. Wait for the LED
light on that earphone to flash white and then connect to your device’s
wireless pairing settings as described earlier.
HOW TO RESET THE EARPHONES
Press and hold the multi-function buttons for 8 seconds until the earphones
turn on.
FUNCTIONS
TURN ON: Remove earphones from the charging case and the earphones will
turn on automatically. Press and hold the multifunction buttons on both
earphones for 3 seconds to turn the earphones on manually.
TURN OFF: Place earphones back inside the charging case and they will turn
off automatically.
Press and hold the multi-function buttons on both earphones for 3 seconds to
turn them off manually.
PLAY/PAUSE: Click the multi-function button on either earphone once to
pause or play.
PREVIOUS/NEXT: Hold the multi-function button on the right earphone for
1.5 seconds to skip a song. Hold the multi-function button on the left
earphone for 1.5 seconds to go back to a previous song.
VOLUME UP/DOWN: Double-click the multi-function button on the right
earphone to turn the volume up. Double-click the multi-function button on the
left earphone to turn the volume down.
ANSWER/END CALL: Click the multi-function button on either earphone once
when receiving incoming calls to accept calls.
Click the multi-function button on either earphone once during the phone call
to end the call.
REJECT CALL: Press and hold the multi-function button for 2 seconds to
reject incoming calls.
ACTIVATE VOICE ASSISTANT: Triple-click the multi-function button on
either earphone to activate your device’s voice assistant.
FEATURES
- IPX7 waterproof rating
- Up to 5 hours of audio playtime
- Built-in microphone
- Wireless functionality with a range of 33 ft (10 m)
- Compatible with smartphones and other media devices
- Built-in rechargeable battery
- Comes with a magnetic closure carrying case
SPECIFICATIONS
- Earphone playback time: 5 hours
- Earphone charging time: 1.5 hours
- Carrying case charging time: 2.5 hours
- Earbud battery: 3.7V/60mAh
- Charging case battery: 3.7V/800mAh
- Accessories included: USB-C charging cable & three (3) silicone ear tips (sizes Small / Medium / Large)
ECHELON FIT® 1-YEAR LIMITED WARRANTY
For questions, assistance, or replacement parts, do not return to your
retailer. Contact Echelon® customer service below.
For refunds on items not purchased from Echelon® directly, please contact your
retailer. Echelon® warrants this product to be free of manufacturing defects.
Should any such defect develop or become evident within one year from the date
of purchase, Echelon® will replace the entire product or, at its option,
repair or replace the defective part(s) without charge. Contact Echelon®
customer service at 833-937-2453 or at
info@echelon.com to determine whether it is
necessary to return the unit. To return, securely pack the entire unit. Be
sure the carton clearly identifies the sender by name and address. Attach a
letter or card describing the defect and original sales receipt. Mail prepaid
to Echelon Fitness Multimedia, LLC 6011 Century Oaks Dr. Chattanooga, TN
37416.
This warranty is void if damage or malfunction is due to abuse or failure to
operate the product in accordance with instructions and on the recommended
electrical current. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state. If you have any
questions or would like to learn more about Echelon®, please contact us at
833-937- 2453 or at info@echelonfit.com.
Register your product online at
www.registermyechelon.com Customer Service
/ Le service a la clientele / Servicio al Consumidor
833-937-2453 or Email at
cs@echelonfit.com DO NOT DISPOSE OF BATTERIES IN
FIRE. ALWAYS DISPOSE OF BATTERIES PER LOCAL & FEDERAL GUIDELINES. © 2020
ECHELON FITNESS MULTIMEDIA, LLC. All specifications are subject to change
without notice. All rights reserved. Echelon Fitness Multimedia, LLC 6011
Century Oaks Dr. Chattanooga, TN 37416 ECHELONFIT.COM
**** Read Instructions
Before Operating
MADE IN CHINA
PATENT PENDING
REV: 092220
MODEL: ECHBUDS
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used
in portable exposure conditions without restriction.