WYZE Cam v3 1080p HD Indoor/Outdoor Video Camera Installation Guide

WYZE Cam v3 1080p HD Indoor/Outdoor Video Camera

Please read the instruction before installation and using.

For more detailed setup and mounting instructions go to YouTube search for “OLAIKE TV”
or contact us at: support@olaike.com 

Installation

1.How to install the mount with 3M tape

Note:

• Clean the surface and keep it dry before use.
• 3M glue is only available indoors and is not recommended for outdoor use.
• The paste place must be a smooth surface that does not support dirt or uneven surfaces.

1. Tear off the film of the 3M glue and stick it on a smooth surface
2. Keep pressing for 10s
3. Push Wyze Cam V2 in from the side
   Add the auxiliary board and push Wyze Cam V3 in from the side

Add the auxiliary board and push Wyze Cam V3 in from the side

How to install the mount with Screws

1. Mark the position of holes

2. Put the wall anchor into the wall

3. Locking Screws
   

4. Push Wyze Cam V2 in from the side
   

Add the auxiliary board and push Wyze Cam V3 in from the side

How to install the bracket

Note:
If you purchased plan with bracket, you can refer to the following installation method:

1. Mark the position of holes

2. Put the wall anchor into the wall

3. Locking Screws
   

4. Align the wall-mounted

5. Push Wyze Cam V2 in screw hole with the bracket from the side and tighten it
   

6. Add the auxiliary board and push Wyze Cam V3 in from the side

Support 360° Swivel and 90° Tilt

Email address: support@olaike.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>