Shenzhen Nito Power Source Technology JRZS240 Magnetic Wireless Car Charger Holder User Manual
- June 6, 2024
- Shenzhen Nito Power Source Technology
Table of Contents
User Manual
Magnetic wireless car charge holder
Specifications
Model: JR-ZS240
Name: Magnetic wireless car charge holder
Color: Black
Material: ABS + PC Input: 5V= 2A 9V= 2A 12V= 1.5A
Output: 5W/7.5W/10W/15W (MAX)
Input port: Type-C
Applicable phone size: 4.5-6.7 inch
Selling points
- Accurate magnetic alignment, high charging efficiency.
- 15W Wireless fast charging, intelligent recognition, sensitive response.
- Powerful magnetic force, resistant to the bumpy road, safe and firm.
- One-hand operation, ready to clamp it tightly, arbitrary adjustment angle.
Description
Operation steps
Step 1: Connect the air outlet clip to this product, but the universal ball joint into the nut first, and then insert it into the bolt on the back of the product.
Step 2 : Tighten the nut clockwise
Step 3 : Insert it in the air outlet, tighten the rotary knob clockwise.
Step 4 : Connect the Type-C charging cable in the package to connect the holder and the car charger.
Step 5 : Put the phone on the holder, it can accurately absorb the phone by magnetic.
Warning
- Do not dismantle it or refit this product by yourself
- Do not put this product in a humid environment.
- Please do not charge the product near the heat source or around it.
- Do not let water or other liquids flow into the interface of this product, otherwise, it may cause damage to the product.
- Do not install the wireless charger on the airbag cover or airbag deployment area.
- Please remove the metal and magnetic protective case or card (such as bank card) from your device when charging it.
- It is normal to generate heat when charging and will not affect the performance of the product. But if you feel that the phone or the product is overheated, please disconnect the power supply and charge it after cooling down.
- Avoid using bent or damaged USB cables, please.
Warranty Card
Model:
Purchase Date:
Distributor:
Invoice Date:
Tel.:
Customer Name:
Zipcode:
After-sales service instructions
Dear users thank you very much for using our products. In order to protect your rights and interests, it is clear that distribution agents and companies should bear the responsibility of product maintenance. replacement and return Please read the following items:
- The product warranty card is our products to provide free after-sales service during the warranty period of the necessary proof.
- According to who sells who is responsible for the three guarantees principle, the product quality problem with (product guarantee card) contact with the dealer, by the dealer to provide the service to the customer, my company provides the service support to the dealer.
- The company undertakes that if a quality problem occurs within seven days from the date of sale (the date is valid, the date of the bill shall prevail). the customer may choose to return the goods to replace the goods and maintain the warranty. Products beyond warranty Quality problems enjoy life-long maintenance (each after-sales service points only charge for component materials); customers are requested to purchase with the dealer to fill in (product warranty card):
- Below cases are not included in the warranty
- Exceed the Service time
- Damage caused by failure to use, maintain or keep in accordance with the
requirements of the instructions for the use of the product
3)A person who LS is not responsible for warranty will remove and cause damage - No warranty card (5)(The warranty card) where the contents of the card are not in accordance with the .thySiCal object of the product or are altered 6)Caused by force majeure
- Our company all rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>