DENON DHT-S217 Dolby Atmos Sound Bar User Guide
- June 6, 2024
- Denon
Table of Contents
Folding of Safety instructions sheet
DHT-S217
Dolby Atmos Sound Bar
Quick Start Guide
Read Me First….
-
At first, fold a sheet of paper into four in a vertical.
-
Next fold into two in a horizontal.
-
That’s all.
Before you begin
What’s in the box
-
Place the sound bar
For the best listening experience, place the sound bar centered under your TV and flush with the front edge of your cabinet.
• The sound bar can also be mounted on a wall. Refer to the included wall mount template for details.
• For additional wall mounting assistance, refer to the online Owner’s Manual or consult with your local Denon dealer or professional installer. -
Connect the sound bar to your TV
-
Connect one end of the HDMI cable to the port labeled “eARC” or “ARC” on your TV.
-
Connect the other end of the HDMI cable to the port marked “TV (HDMI eARC/ARC)” on your sound bar.
• If the TV does not have an HDMI labeled “eARC” or “ARC”, connect the sound bar to the TV using the optical cable. Please note that an optical connection does not support Dolby Atmos. -
Connect the power cord to a wall outlet
Connect the included power cord to the sound bar, and insert the plug into an outlet. -
Install batteries in the remote control
Slide off the cover on the back of the remote control and insert the batteries in the proper orientation. -
Setup is now complete!
Turn on your TV and verify that you hear sound playing from the sound bar.
• If you hear an echo or audio coming from the TV’s internal speakers, make sure the TV speakers are switched off in the TV settings menu. Refer to the TV user manual for guidance.
Owner’s manual
- Refer to the online manual for other functions, information and operation procedure details. manuals.denon.com/DHTS217/NA/EN/
- For more information, visit www.denon.com
About the status lights
The sound bar lights indicate the power state, input source, audio format
and other status information.
Streaming music via Bluetooth
Before you can stream music from your Bluetooth device to the sound bar, you
must first “pair” the sound bar and your device.
-
Press the (Bluetooth) button on the sound bar (or remote control) until the Bluetooth light blinks blue. The sound bar enters pairing mode.
-
Go to the Bluetooth settings on your device, and make sure Bluetooth is turned ON.
-
Select “Denon DHT-S217”.
The Bluetooth light on the sound bar turns solid blue when pairing is complete.
Trademark information
| Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation. Manufactured under
license from Dolby Laboratories. Confidential unpublished works. Copyright ©
2012-2021 Dolby Laboratories. All rights reserved.
---|---
| The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the
United States and other countries.
| The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
Printed in China ** *** 00AD
© 2022 Sound United. All Rights Reserved.
72-S217E2-USEB1
Safety Instructions
(Read these safety instructions before operating the unit.)
SAFETY PRECAUTIONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. -
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
UKCA DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product is in compliance with
following UK regulations. The full text of the UKCA declaration of conformity
is available at the following internet address:
- Radio Equipment Regulation 2017
- The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- Eco design for Energy-Related Products Regulations 2010
<UKCA declaration of conformity URL: http://manuals.denon.com/CEdeclaration/>
UK Importer: D+M Audiovisual Ltd
Cells 1 & 2 Kopshop 6 Old London Road
Kingston Upon Thames KT2 6QF UK
WARNINGS
NOTES ON USE
- Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack.
- Handle the power cord carefully. Hold the plug when unplugging the cord.
- Keep the unit free from moisture, water, and dust.
- Unplug the power cord when not using the unit for long periods of time.
- Do not obstruct the ventilation holes.
- Do not let foreign objects into the unit.
- Do not let insecticides, benzene, and thinner come in contact with the unit.
- Never disassemble or modify the unit in any way.
- Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains.
- Naked flame sources such as lighted candles should not be placed on the unit.
- Observe and follow local regulations regarding battery disposal.
- Do not expose the unit to dripping or splashing fluids.
- Do not place objects filled with liquids, such as vases, on the unit.
- Do not handle the mains cord with wet hands.
- When the switch is in the OFF (STANDBY) position, the equipment is not completely switched off from MAINS.
- The equipment shall be installed near the power supply so that the power supply is easily accessible.
- Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures, such as near a heater.
- Do not bend forcedly the plug on the equipment or the connection between the connector and micro USB/USB cable.
(Only amplifier)
CAUTION:
HOT SURFACE. DO NOT TOUCH.
The top surface over the internal heat sink may become hot when operating this
product continuously.
Do not touch hot areas, especially around the “Hot surface mark” and the top
panel.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug from
the wall socket outlet. The mains plug is used to completely interrupt the
power supply to the unit and must be within easy access by the user.
CAUTION:
To prevent electric shock hazard, do not connect to mains power supply while
grille is removed.
- DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product is in compliance with following EU/EC Directives. The full text of the EU declaration of conformity is available at the following internet address:
ErP: EC regulation 1275/2008 and its frame work directive 2009/125/EC including amendment 801/2013
RoHS: 2011/65/EU, and amendment directive (EU) 2015/863
RE: 2014/53/EU
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please
dispose of any materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations. Batteries
should never be thrown away or incinerated but disposed of in accordance with
the local regulations concerning battery disposal. This product and the
supplied accessories, excluding the batteries, constitute the applicable
product according to the WEEE directive. Incorrect handling of this type of
waste may affect the environment and human health due to potentially hazardous
substances that are generally associated with waste electrical and electronic
equipment.
< EU declaration of conformity URL:
http://manuals.denon.com/CEdeclaration/>
D&M Holdings Inc.
2-1 Nissin-cho, Kawasaki-ku, Kawasaki, Kanagawa, 210-8569 Japan
EU importer: D&M Europe B.V.
Beemdstraat 11, 5653 MA Eindhoven, The Netherlands
Cautions on installation
-
For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure.
- Amplifier: 0.3 m or more
- Other units: 0.1 m or more
CAUTIONS
When mounting the speakers on a wall
- The speakers can be mounted on a wall using the keyhole hook on its rear panel.
- When you mount the speakers, be sure to install them properly and securely.
- Screw in one self-tapping screw (commercially available, 3/16 inch / 5 mm to 1/4 inch / 6 mm diameter) into a wall that has sufficient strength to support the weight of the speaker, or into reinforcing material on the wall.
- Hook the keyhole hook on the back of the speaker onto the head of the self-tapping screw.
- Check that the head of the self-tapping screw hooks securely into the keyhole hook hole.
- Do not attempt to install this product onto a wall made of material that may crumble easily, such as mortar or decorative plywood. Doing so may result in the screw pulling out and speaker falling, causing damage to the speaker or injury.
- Do not install the speaker using other methods such as nails or double-sided tape. The nails may become loose due to vibration or the double-sided tape may peel off due to prolonged use, causing the speaker to fall.
- Be sure to fix the cables in place so that they cannot be pulled or tripped over by accident.
- Be sure to check that the product is safe after installation. Please note that we cannot accept any liability for accidents, etc. that occur as a result of where or how this product is installed. If you are unsure of how to install this product safely, request a professional contractor do the installation work.
D&M Holdings Inc. 5431 10769 00AD
70-DTS217-SAFB1
-
DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product [Product Name: HOME THEATER SYSTEM, Model Number: DHT-S217] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://manuals.denon.com/CEdeclaration/ -
IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets RE directive requirements. Modification of the product could result in hazardous Radio and EMC radiation. -
CAUTION
Separation distance of at least 20 cm must be maintained between this product and all persons. This product and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
< EU declaration of conformity URL: http://manuals.denon.com/CEdeclaration/>
D&M Holdings Inc.
2-1 Nissin-cho, Kawasaki-ku, Kawasaki, Kanagawa, 210-8569 Japan
EU importer: D&M Europe B.V.
Beemdstraat 11, 5653 MA Eindhoven, The Netherlands
Radio Specification (for Europe model)
| Type | Frequency Range | Max. RF Power |
|---|---|---|
| Bluetooth | 2,402 – 2,480 MHz | 20 dBm |
| Wireless Module(BAR/SUB) | 2,400 – 2,483.5 MHz | 20 dBm |
UKCA DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product is in compliance with
Radio Equipment Regulation 2017 of UK regulations. The full text of the UKCA
declaration of conformity is available at the following internet address:
<UKCA declaration of conformity URL:
http://manuals.denon.com/CEdeclaration/>
UK Importer: D+M Audiovisual Ltd
Cells 1 & 2 Kopshop 6 Old London Road
Kingston Upon Thames KT2 6QF UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>