STAMINA 35-1050E BodyTrack Glider Owner’s Manual
- June 6, 2024
- Stamina
Table of Contents
35-1050E BodyTrack Glider
Owner’s Manual
Product May Vary Slightly From Pictured.
CAUTION: Weight on this product should not exceed 250 lbs.
This Product is Distributed Exclusively by
! WARNING
Exercise can present a health risk. Consult a physician before beginning any
exercise program with this equipment. If you feel faint or dizzy, immediately
discontinue use of this equipment. Serious bodily injury can occur if this
equipment is not assembled and used correctly. Serious bodily injury can also
occur if all instructions are not followed. Keep others and pets away from
equipment when in use. Always make sure all bolts and nuts are securely
tightened prior to each use. Follow all safety instructions in this manual.
When calling for parts or service, please specify the following numbers :
Model#: 35-1050E
S/N: _____
2040 N Alliance Ave, Springfield, MO 65803 Customer Care
1 800-375-7520 www.staminaproducts.com
STAMINA PRODUCTS
MADE IN CHINA
© 2020 Stamina Products, Inc. 2020, 11
RTANT PO IM
Quickstart Guide
Smart Audio Workouts for Your Rower
Go to the App Store on your device or scan the QR Code for quick access.
Download the app and get moving! Assembly video included in app.
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service mark of
Apple Inc., registered in the U.S. and other countries. Google Play and the
Google Play logo are trademarks of Google LLC.
TABLE OF CONTENTS
Safety Instructions ……………………………….. 3 Before You Begin …………………………………. 5
Equipment Warning, Caution & Notice Labels … 6 Hardware Identification Chart
……………….. 7 Assembly Instructions ………………………….. 8 Operational Instructions
……………………… 13 Maintenance ……………………………………….. 14 Storage ………………………………………………. 15
Conditioning Guidelines ……………………… 16 Warm-Up and Cool-Down ……………………. 17 Product Parts Drawing ………………………… 18 Parts List ……………………………………………. 19 Warranty …………………………………………….. 21 Notes ………………………………………………….. 22 Fax/Mail Ordering Form ………………………. 23
SAFETY INSTRUCTIONS
! WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov ! WARNING
Consult your physician before starting this or any exercise program. This is
especially important if you are over the age of 35, have never exercised
before, are pregnant, or suffer from any health problem. This product is for
home use only. Do not use in institutional or commercial applications. Failure
to follow all warnings and instructions could result in serious injury or
death. ! WARNING To reduce the risk of serious injury, read the following
Safety Instructions before using the BodyTracTM Glider.
1. Save these instructions and ensure that other exercisers read this manual
prior to using the BodyTracTM Glider for the first time.
2. Read all warnings and cautions posted on the BodyTracTM Glider. 3. The
BodyTracTM Glider should only be used after a thorough review of the Owner’s
Manual.
Make sure that it is properly assembled and tightened before use. 4. We
recommend that two people be available for assembly of this product. 5. Keep
children away from the BodyTracTM Glider. Do not allow children to use or play
on the
BodyTracTM Glider. Keep children and pets away from the BodyTracTM Glider when
it is in use. 6. It is recommended that you place this exercise equipment on
an equipment mat. 7. Set up and operate the BodyTracTM Glider on a solid level
surface. Do not position the
BodyTracTM Glider on loose rugs or uneven surfaces. 8. Make sure that adequate
space is available for access to and around the BodyTracTM Glider. 9. Keep
fingers clear of all pinch points when folding and unfolding the BodyTracTM
Glider. 10. Before using, inspect the BodyTracTM Glider for worn or loose
components, and securely tighten
or replace any worn or loose components prior to use. 11. Shocks on rowers get
HOT during use. To avoid burns, do not touch the shock until it has time to
cool. 12. C o n s u l t a p h y s i c i a n p r i o r t o c o m m e n c i n g
a n e x e r c i s e p r o g r a m a n d f o l l o w h i s / h e r
recommendations in developing your fitness program. If at any time during
exercise you feel faint, dizzy, or experience pain, stop and consult your
physician. 13. Always choose the workout which best fits your physical
strength and flexibility level. Know your limits and train within them. Always
use common sense when exercising. 14. Do not wear loose or dangling clothing
while using the BodyTracTM Glider. 15. Never exercise in bare feet or socks;
always wear proper footwear such as running, walking, or cross training shoes
that fit well, provide foot support, and feature non-skid rubber soles. 16. Be
careful to maintain your balance while using, mounting, dismounting, or
assembling the BodyTracTM Glider, loss of balance may result in a fall and
serious bodily injury. 17. Do not use the seat to move the BodyTracTM Glider.
The Seat will move and the Seat Carriage may pinch your hand or fingers. 18.
The BodyTracTM Glider should not be used by persons weighing over 250 pounds.
19. The BodyTracTM Glider should be used by only one person at a time. 20. The
BodyTracTM Glider is for consumer use only. It is not for use in public or
semipublic facilities.
3
NEED HELP?
CONTACT US FIRST
1 800-375-7520
customer.care@staminaproducts.com
Hi! From all of us here at Stamina Products, thank you for your purchase. We
know that you have big fitness goals in mind and we are here to help you
along. Call us, email us, or send us a message on Facebook. Be sure to contact
us if you have any questions on your new product. We look forward to hearing
from you!
With your body in mind, Stamina Customer Care
To enact your extended warranty and to help us better serve you, please go
online and register your new product.
register.staminaproducts.com
It is quick and easy to register online, but if you’re a little old school or
just need a reason to raise that little flag on your mailbox, fill out the
info on the last page of this
manual and mail it in.
ONLINE
customer.care@staminaproducts.com www.staminaproducts.com
TELEPHONE
1 800-375-7520
FAX
417-889-8064
MAIL
Stamina Products, Inc. ATTN: Customer Care 2040 N Alliance Ave Springfield, MO
65803
facebook.com/StaminaProducts facebook.com/AeroPilates
CUSTOMER CARE HOURS: Monday-Thursday, 7:30 AM-5:00 PM, Central Time
Friday, 8:00 AM-3:00 PM, Central Time
BEFORE YOU BEGIN
Thank you for choosing the BodyTracTM Glider. We take great pride in this
quality product and hope it will provide many hours of quality exercise to
make you feel better, look better, and enjoy life to its fullest.
It’s a proven fact that a regular exercise program can improve your physical
and mental health. Too often, our busy lifestyles limit our time and
opportunity to exercise. The BodyTracTM Glider provides a convenient and
simple method to begin your journey of getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing below and familiarize
yourself with the parts that are labeled. Locate the serial decal on the
product and write the serial number on the cover of the manual in the space
provided. See the next page for an image of the serial decal. Model number and
serial number are required when
calling for assistance.
Read this manual carefully before using the BodyTracTM Glider.
Providing you with a quality product is Stamina’s
top priority. However, sometimes there could be a
missing or incorrectly sized part. If you have any
questions or problems with the parts included with your BodyTracTM Glider,
please do not return the
product. Contact us FIRST!
If a part is missing or defective, please contact
Customer Care for assistance. Call us toll free at
1-800-375-7520 (in the U.S.) or live
chat on staminaproducts.com. Our Customer Care Staff is available to assist
you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and
8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Be sure to have the name and model number of
the product available when you contact us.
Meter Post
Pedal Pedal Strap
Left Stand Cap
Front Stabilizer
Meter Front Support Front Cover
Caution Label Serial Decal
Right Handlebar Seat
Left Handlebar
Pivot Connector Extension Arm
Shock
Extension Arm
Center Beam
Rear Support Stabilizer Cap
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : 5
Allen Wrench (5mm) Allen Wrench (5mm) Wrench (13mm)
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
This chart is provided to help identify the warning, caution, and notice
labels on the BodyTracTM Glider. Please take a moment to familiarize yourself
with all of the warning, caution, and notice labels.
CAUTION LABEL(67)
SERIAL DECAL(69)
To best serve you, our Customer Care Representatives will need your serial
number. For quick access, write in your serial number on the cover of the
manual.
6
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the fasteners used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.
3/16″ 1/4″ 5/16″
3/8″
1/2″
INCHES
0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6 in.
mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat heads, is measured from below the head to the end of the bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw.
length length
After unpacking the unit, open the hardware bag and make sure that you have all the following fasteners. Some fasteners may be already attached to the parts.
Part No. and Description
Qty
49 Screw, Round Head (M5 x 0.8 x 12mm)
2
51 Bolt, Button Head (M8 x 1.25 x 15mm)
8
53 Bolt, Button Head (M8 x 1.25 x 25mm)
2
36 Large Washer (M8)
2
59 Washer (M8)
8
62 Nylon Nut (M8 x 1.25)
2
7
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor
in front of you. Remove all packing materials from your area and place them
back into the box. Do not dispose of the packing materials until assembly is
completed. Read each step carefully before beginning. If you are missing a
part, please go to staminaproducts.com under the Customer Care section and
order the part needed, e-mail us at customer.care@staminaproducts.com, or call
us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to
5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M.
(Central Time) on Friday. Some product parts are fit tested at the factory to
ensure proper fit and alignment. Marks in the paint may be noticeable, but are
not an indication of damage. STEP 1 Lay the Main Frame Assembly on the floor
as shown in the illustration. Now refer to inset drawing A. Make sure the Key
Rib in the STABILIZER CAP(5) aligns with the slot in the REAR SUPPORT(4), then
press the STABILIZER CAP(5) onto the REAR SUPPORT(4). Turn the Main Frame
Assembly to the normal upright position and make sure the STABILIZER PAD(6) is
secured to the STABILIZER CAP(5).
A.
Key Rib
8
ASSEMBLY INSTRUCTIONS
STEP 2 Insert the Bracket on FRONT STABILIZER(28) into the FRONT SUPPORT(26).
Attach the METER POST(31) to the FRONT SUPPORT(28), then bolt the METER
POST(31), FRONT SUPPORT(26), and FRONT STABILIZER(28) together with BUTTON
HEAD BOLTS(M8x1.25x15mm)(51) and WASHERS(M8)(59). Please do not tighten any of
these bolts until all six bolts are attached. NOTE: Be careful not to damage
the EXTENSION WIRE(38) when assembling the METER POST(32). STEP 3 Connect the
EXTENSION WIRE(39) to the SENSOR WIRE(40).
9
ASSEMBLY INSTRUCTIONS
STEP 4 Insert the PEDAL SHAFT(32) through holes located on the METER POST(31).
Place a PEDAL SPACER(33) and a PEDAL(34) onto each end of the PEDAL SHAFT(32)
and slide them toward the METER POST(31). Then secure the PEDALS(34) with
BUTTON HEAD BOLTS(M8x1.25x15mm)(51) and LARGE WASHERS (M8)(36) at both ends of
the PEDAL SHAFT(32). You need to use two Allen Wrenches to tighten the BUTTON
HEAD BOLTS(M8x1.25x15mm)(51) at both ends of the PEDAL SHAFT(32) at the same
time. STEP 5 Remove the LOCKING KNOBS(13) from the PIVOT CONNECTOR(10).
10
ASSEMBLY INSTRUCTIONS
STEP 6 Unfold the HANDLEBARS(17, 18) and the EXTENSION ARMS(14) as shown in
the illustration. Attach the EXTENSION ARMS(14) to the PIVOT CONNECTOR(10)
with the LOCKING KNOBS(13). STEP 7 Install a AA battery into the METER(37),
the battery is not included. See page 12 for detailed battery installation
instructions. Connect the EXTENSION WIRE(39) to the METER(37). Attach the
METER(37) to the plate on the METER POST(31) with ROUND HEAD
SCREWS(M5x0.8x12mm)(49).
11
ASSEMBLY INSTRUCTIONS
STEP 8 Slide the SEAT ASSEMBLY(42, 43) onto the CENTER BEAM(1). Attach the
SEAT STOPPERS(3) to the back end of the CENTER BEAM(1) with BUTTON HEAD
BOLTS(M8x1.25x25mm)(53). Also, please verify that the other SEAT STOPPERS(3)
at the front end of the CENTER BEAM(1) are assembled at the factory. STEP 9
Press the CENTER BEAM CAP(2) into the back end of the CENTER BEAM(1).
12
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON : Seat movement or press the button.
POWER OFF : A u t o m a t i c a l l y s h u t s o ff a f t e r f o u r minutes
of inactivity.
MODE/RESET BUTTON: Press to select display functions, including SCAN, TIME,
TOTAL COUNT, COUNT, and CALORIES. Press and hold for two seconds to reset all
functions to zero, except TOTAL COUNT.
FUNCTIONS: SCAN: Automatically scans each function of TIME, TOTAL COUNT,
COUNT, and CALORIES in sequence with change every six seconds.
TIME: Displays the elapsed time from one second up to 99:59 minutes.
TOTAL COUNT: Displays the total accumulated number of rows you have taken,
from zero to 9999 rows. The total accumulated rows is retained when the meter
is turned off.
COUNT: Displays the total number of rows you have taken from zero to 9999
rows.
CALORIES: Displays the calorie burned from zero to 9999 Kcal. The calorie
readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE: The TOTAL COUNT will be reset to zero after batteries are removed for
battery replacement or storage of the unit.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter. 2. The meter operates with
a AA battery (1.5V each), the battery is not
included. Refer to the illustration to install or replace the battery.
NOTE: 1. Rechargeable batteries are not recommended. 2. Ultimate disposal of
battery should be handled according to all state and federal laws and
regulations. 3. Do not dispose of batteries in fire.
AA Battery
13
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
The resistance of the shock can be adjusted by twisting the adjustment knob at
the top of the shock. There are settings from 1 to 12. Setting #1 will provide
the lowest resistance. Setting #12 will provide the highest resistance.
CAUTION: The shock gets HOT after a few minutes of use.
Adjustment Knob
Mark
PEDAL STRAP ADJUSTMENT
If you feel it is more comfortable for your workout, you can change to attach
the PEDAL STRAP(35) to the upper position in the PEDAL(34) as shown in
illustration 1 below. Run the PEDAL STRAP(35) through the opening from the
bottom of the PEDAL(34), then go through the Steel Ring. Slide the Steel Ring
down to against the PEDAL(34). Run the PEDAL STRAP(35) through the opening in
the PEDAL(34) on the other side from the top as shown in the illustration 1,
then make the end of the PEDAL STRAP(35) go up to attach onto the upper part
of the PEDAL STRAP(35) with the Hook & Loop Pad. Attach the end of the PEDAL
STRAP(35) to different position with the Hook & Loop Pad to adjust the length.
Refer to illustration 2.
1. Hook & Loop Pad
- Hook & Loop Pad
Steel Ring
End of Pedal Strap
MAINTENANCE
The safety and integrity designed into the BodyTracTM Glider can only be
maintained when the BodyTracTM Glider is regularly examined for damage and
wear. Special attention should be given to the following:
1. Pull on the HANDLEBARS(17, 18) and verify that the SHOCK(22) provides
tension. 2. Clean the roller tracks in the CENTER BEAM(1) with an absorbent
cloth. 3. Verify that all nuts and bolts are present and properly tightened.
Replace missing nuts and bolts.
Tighten loose nuts and bolts. 4. Verify that the CAUTION LABEL(67) is in place
and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement
CAUTION LABEL(67) if it is missing or damaged. 5. It is the sole
responsibility of the user/owner to ensure that regular maintenance is
performed. 6. Worn or damaged components must be replaced immediately or the
BodyTracTM Glider removed
from service until repair is made. 7. Only Stamina Products supplied
components should be used to maintain/repair the BodyTracTM
Glider. 8. Keep your BodyTracTM Glider clean by wiping it off with an
absorbent cloth after use.
14
STORAGE
1. To store the BodyTracTM Glider, simply keep it in a clean dry place. 2.
Grasp the Front and Rear Stabilizer to move the BodyTracTM Glider. Do not use
the Seat to move the
BodyTracTM Glider. The Seat will move and the Seat Carriage may pinch your
hand or fingers. 3. To avoid damage to the electronics, remove the battery
before storing the BodyTracTM Glider for one
year or more.
A. Folding the BodyTracTM Glider
Follow the following process to fold the BodyTracTM Glider as illustrated for
easy storage.
A. Slide the SEAT(42) to the front end of the CENTER BEAM(1). Remove the
LOCKING KNOBS(13) from the PIVOT CONNECTOR(10).
B. Swing the LEFT and RIGHT HANDLEBARS(17, 18) backward. Then fold the EXTENSION ARMS(14) to the front.
C. Lock the handlebars in the folded position by
B.
screwing the LOCKING KNOBS(13) onto the
PIVOT CONNECTOR(10). Now, you can store the
BodyTracTM Glider in the place you want.
D. Refer to illustration D. You can stand the BodyTracTM Glider on end for storage.
NOTE: Keep fingers clear of all pinch points when folding and unfolding the BodyTracTM Glider.
D.
C.
15
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you and your physician. Warm up before you exercise and cool down after you work out. Take your pulse periodically during your workout and strive to stay within a range of 60% (lower intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and build up to higher intensity as you become more aerobically fit. If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so you don’t tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below. For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the exercise but continuing to move your legs or walk around. Place two or three fingers on your wrist and take a six second heartbeat count. Multiply the results by ten to find your heart rate. For example, if your six second heartbeat count is 14, your heart rate is 140 beats per minute. A six second count is used because your heart rate will drop rapidly when you stop exercising. Adjust the intensity of your exercise until your heart rate is at the proper level.
wrist pulse
Target Heart Rate Zone Estimated by Age*
Age
20 years 25 years 30 years 35 years 40 years 45 years 50 years 55 years 60
years 65 years 70 years
Target Heart Rate Zone (55%-90% of Maximum Heart Rate)
110-180 beats per minute 107-175 beats per minute 105-171 beats per minute
102-166 beats per minute
99-162 beats per minute 97-157 beats per minute 94-153 beats per minute
91-148 beats per minute 88-144 beats per minute 85-139 beats per minute 83-135
beats per minute
Average Maximum Heart Rate 100% 200 beats per minute 195 beats per minute 190 beats per minute 185 beats per minute 180 beats per minute 175 beats per minute 170 beats per minute 165 beats per minute 160 beats per minute 155 beats per minute 150 beats per minute
- For cardiorespiratory training benefits, the American College of Sports Medicine recommends working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart rate, the following formula was used: 220 – Age = predicted maximum heart rate
16
WARM-UP and COOL-DOWN
Warm-Up The purpose of warming up is to prepare your body for exercise and to
minimize injuries. Warm up for two to five minutes before strength training or
aerobic exercising. Perform activities that raise your heart rate and warm the
working muscles. Activities may include brisk walking, jogging, jumping jacks,
jump rope, and running in place.
Stretching Stretching while your muscles are warm after a proper warm-up and
again after your strength or aerobic training session is very important.
Muscles stretch more easily at these times because of their elevated
temperature, which greatly reduces the risk of injury. Stretches should be
held for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch Place feet shoulder-width apart and lean forward. Keep this
position for 30 seconds using the body as a natural weight to stretch the
backs of the legs. DO NOT BOUNCE! When the pull on the back of the legs
lessens, gradually try a lower position.
Bent Torso Pulls While sitting on the floor, have legs apart, one leg straight
and one knee bent. Pull the chest down to touch the thigh on the leg that is
bent, and twist at the waist. Hold this position at least 10 seconds. Repeat
10 times on each side.
Floor Stretch While sitting on the floor, open the legs as wide as possible.
Stretch the upper body toward the knee on the right leg by using your arms to
pull your chest to your thighs. Hold this stretch 10 to 30 seconds. DO NOT
BOUNCE! Do this stretch 10 times. Repeat the stretch with the left leg.
Bent Over Leg Stretch Stand with feet shoulderwidth apart and lean forward as
illustrated. Using the arms, gently pull the upper body towards the right leg.
Let the head hang down. DO NOT BOUNCE! Hold the position a minimum of 10
seconds. Repeat pulling the upper body to the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or
near normal, resting
state at the end of each exercise session. A proper cool-down slowly lowers
your heart rate and allows blood to return to the heart. Your cool-down should
include the stretches listed above and should be completed after each strength
training session.
17
PRODUCT PARTS DRAWING FRONT
BACK
18
PARTS LIST
PART#
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
PART NAME
Center Beam Center Beam Cap Seat Stopper Rear Support Stabilizer Cap
Stabilizer Pad Threaded Support Plate Handlebar Support Sensor Support Plate
Pivot Connector Pivot Bushing Bumper Knob Locking Knob Extension Arm Extension
Arm Bushing Large Washer (M12) Left Handlebar Right Handlebar Securing Cap
Foam Grip Handlebar Cap Shock Support Plate Front Cover Sleeve Front Support
Support Ring Front Stabilizer Left Stand Cap Right Stand Cap Meter Post Pedal
Shaft Pedal Spacer Pedal Pedal Strap Large Washer (M8) Meter Grommet Extension
Wire Sensor Wire Magnet Seat Seat Carriage Roller Round Plug (25mm) Nut Cap
(M10) Screw, Round Head (M2.9 x 10mm)
19
QTY
1 1 4 1 1 1 3 1 1 1 2 2 2 2 4 2 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1
1 1 1 1 4 2 2 4
PARTS LIST
PART#
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
PART NAME
Wave Washer (ø20 x ø23.5 x 0.5mm thick) Screw, Round Head (M5 x 0.8 x 12mm)
Bolt, Round Head (M6 x 1 x 15mm) Bolt, Button Head (M8 x 1.25 x 15mm) Bolt,
Button Head (M8 x 1.25 x 20mm) Bolt, Button Head (M8 x 1.25 x 25mm) Bolt,
Button Head (M8 x 1.25 x 50mm) Bolt, Hex Head (M8 x 1.25 x 30mm) Bolt, Hex
Head (M8 x 1.25 x 41mm) Bolt, Hex Head (M10 x 1.5 x 120mm) Washer (M6) Washer
(M8) Washer (M10) Spring Washer (M8) Nylon Nut (M8 x 1.25) Nylon Nut (M10 x
1.5) Allen Wrench (5mm) Wrench (13mm) Owner’s Manual
Caution Label Screw, Round Head (M3.5 x 15mm) Serial Decal
QTY
4 4 4 8 8 6 2 4 2 1 4 24 2 12 10 3 2 1 1
1 5 1
20
LIMITED WARRANTY
MODEL 35-1050E
WARRANTY
Stamina Products, Inc. (“Stamina”) warrants to the original purchaser that
this product will be free from defects in materials and workmanship that arise
under normal use, service, proper assembly and proper operation in accordance
with product warnings/instructions for a period of 90 days on the parts and
one year on the frame from the date of the original purchase from an
authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS
BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY KIND OR TO
ANY DEFECT OR CHANGE CAUSED BY IMPROPER ASSEMBLY, REPAIR, REPLACEMENT,
SUBSTITUTION OR USE WITH PARTS NOT PROVIDED BY STAMINA. Commercial use
includes use of product in athletic clubs, health clubs, spas, gyms, and all
other public or semipublic facilities whether or not the product’s use is in
furtherance of a profit making enterprise, and all other use which is not for
personal purposes.
To implement this limited warranty, send a written notice stating your name,
date, and place of purchase and a brief description of the defect along with
your receipt to Stamina Products, Inc. 2040 N Alliance Ave, Springfield,
Missouri, USA, MO 65803, or email us at customer.care@staminaproducts.com, or
call us at 1-800-375-7520. If the
defect is covered under this limited warranty, you will be requested to return
the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY (INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE) MAY BE COMMENCED MORE THAN ONE (1) YEAR
AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. These warranties are not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS
LIMITED WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT
IS THE EXCLUSIVE REMEDY. If any claim is made under this limited warranty or
any implied warranty, Stamina reserves the right to require the product to be
returned for inspection, at the purchaser’s expense, to Stamina’s premises in
Springfield, Missouri. Return of the enclosed warranty registration card is
not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL, SPECIAL
OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY. NO ORAL OR WRITTEN
INFORMATION GIVEN BY STAMINA, ITS AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY
OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. This warranty gives you
specific legal rights, and you may also have other legal rights which vary
from state to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY.
The laws in some states affect the disclaimer or limitation of implied
warranties and consequential and incidental damages. If any such law is found
applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages shall be deemed to be
modified to the extent necessary to comply with applicable law.
21
NOTES
22
TO CONTACT CUSTOMER CARE
For your convenience, Stamina’s customer care representatives can be reached
by email at customer.care@staminaproducts. com or by phone at
1-800-375-7520 (in the U.S.). Our
customer care representatives are available Monday through Thursday from 7:30
a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
ONLINE CUSTOMER CARE customer.care@staminaproducts.com www.staminaproducts.com
TELEPHONE CUSTOMER CARE Tel: 1 800-375-7520
FAX CUSTOMER CARE Fax: 417-889-8064
MAIL STAMINA PRODUCTS, INC.
ATTN: Customer Care 2040 N Alliance Ave, Springfield, MO 65803
Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com
TO REGISTER YOUR PRODUCT
To enact your warranty, please register your product by going to
register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number
(printed on the black and white sticker on your product) ready.
If you don’t have internet access, you can call customer care at 1-800-375-7520, or fill out and mail the product registration form below to Stamina Products, Inc.; 2040 N Alliance Ave, Springfield, MO 65803.
PRODUCT REGISTRATION FORM
Stamina Products, Inc. 2040 N Alliance Ave, Springfield, MO 65803
Model Number: …………………………………………………………………………..
Serial Number: …………………………………………………………………………………
Product Name: ……………………………………………………………………………………………………………………………………………………………………………………………………….
Place Purchased: ……………………………………………………………………………………………………………………………………………………………………………………………………
Date of Purchase: ……………………………………………………………………….
Purchase Price: ………………………………………………………………………………..
First Name: ………………………………………………………………………………..
Last Name: ………………………………………………………………………………………
City: …………………………………………………………
State: ……………………………………………………….
Zip Code: ………………………………………….
Email Address: ……………………………………………………………………………
Phone #: (
) …………………………………………………………………………..
Would you like to receive email information or special offers from Stamina Products? Yes No If yes, be sure your email address is included above.
Detach and Mail or Fax the Form Above
TO ORDER PARTS
If there are missing or damaged parts, you can go to parts.staminaproducts.com
and order those parts. If you have questions, please contact customer care. Do
not return the product. To order parts by mail, fill out the sheet below and
fax it to 417-889-8064. The part will
be mailed to your address.
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
Stamina Products, Inc. 2040 N Alliance Ave, Springfield, MO 65803
Mr./Ms: ………………………………………………………………………………………………………………………………………………………………………………………………………………….
Address: …………………………………. …………………………………………………………………………………
Apt. #:………………………………………………………………..
City: …………………………………………………………
State: ……………………………………………………….
Zip Code: ………………………………………….
IMPORTANT : We require your phone number to process the order!
Phone #: (
) ……………………………………………………………………..
Work Phone #: (
) …………………………………………………………………..
Date of Purchase: ……………………………………………………………………….
Model #: ………………………………………………………………………………………………………………………………………………………………………………………………………………..
Purchased From: ……………………………………………………………………………………………………………………………………………………………………………………………………
IMPORTANT: Before filling out the portion below, make sure you have the correct information. Refer to the parts list to make sure you’re ordering the right parts!
PART #
EXAMPLE:
1
DESCRIPTION Rear Unit Assembly
QUANTITY 1