LB-LINK BL-LW05-5R3 Wireless Dongle User Manual
- June 6, 2024
- LB-LINK
Table of Contents
User’s manual
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd
2.4GHz Wireless LAN network card
Product model: BL-LW05-5R3
Safety precautions
-
Do not arbitrarily change the transmission frequency and increase the transmission power (including the installation of the RF power amplifier).
-
prohibited harmful interference to various legitimate radio communications. Once interference is found, it should be stopped immediately and measures can be taken to eliminate interference before continuing to use.
-
It must be able to resist radiation interference in various radio or industrial/scientific /medical applications.
-
May not be used on the aircraft or near the airport.
-
Measures for the Management of Low-Power Electric Wave Radiation Motors Article
12: Low-power radio frequency motor shall not change the frequency, increase the power or change the design characteristics and functions. -
Measures for the Management of Low-Power Wave Radiation Motors Article 14: The use of low-power radio frequency motors shall not affect flight safety and interfere with legal communication. If interference is found, it shall be stopped immediately and it shall be used until there is no interference. Legal communication in the preceding paragraph of 7. refers to the radio communication low-power radio frequency motors operating in accordance with the Telecommunications Law that needs to endure legal communication or interference from electric wave radiation motor equipment for industrial, scientific, and medical use. The 8. shall avoid affecting the operation of nearby radar systems, and high-gain pointing antennas must only be applied to fixed point-to-point systems.
Warning
- Please place this product and accessories where they are inaccessible to children.
- Do not splash water or other liquid onto this product or damage.
- Do not place this product near the heat source or in direct sunlight to avoid deformation or failure.
- Stay away from a flammable or open fire.
- Do not repair this product by yourself.
Product appearance
Product characteristics and parameters:
- Compatible with IEEE 802.11b standards, providing a data rate for wireless 11Mbps. Compatible with IEEE 802.11g standards, providing a data rate for a wireless 54Mbps. Compatible with IEEE 802.11n standards.
- Supports 20MHz,40MHz bandwidth in the 2.4GHz frequency band.
- Support frequency band: WLAN:2.4 002.4835 GHz.
- Provide simple legacy and 20MHz/40MHz coexistence mechanisms to ensure future and network compatibility.
- Friendly user configuration and diagnostic tools.
- driver support: Linux / Android / Windows. 7. is a high-speed USB 2.0 interface for WLAN and USB 1.1. The 8. transmission power does not exceed 1,000 mW. The 9. voltage is 5V.
Operating environment
Operation
Operating Temperature:
Operating temperature:| -20℃ to+70℃
---|---
Relative Humidity:
Relative humidity:| 5-90%non-condensing)
Storage
Temperature:
Temperature:| -55℃to+125 ℃
(no-operating)
---|---
Relative Humidity:
Relative humidity:| 5-90%non-condensing)
Thanks:
You are welcome to give feedback to us on any comments and suggestions in the
process of using the product, and we will warmly serve you.
Note: Display mode of the model approval code: display on the product
nameplate.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>